Professional Documents
Culture Documents
Technical Bulletin
Bulletin # MTB39599 Date 21 August 2013
Subject ISO Image Creator Tool.
Scope Control Loading and Motion Base RT Software running on the following
RTAI/Linux computers: CLC03069-308, CB26545-301, CB26545-302, CLC97033-
311.
Type Assembly Instructions
This bulletin describes the use for the Moog ISO Creator tool. This tool can be used to create Cold Start
installation disc image files of applicable Moog Real Time computers.
Procedure
The tool has been made for customers to create their own RT software backup by generating a bootable RT
installation disk.
1. Unzip the “tkCreateIso.zip” file
2. Connect the computer to the RT computer of the motion system
3. Go to the unzip folder and open “tkCreateIso.exe”
4. The following screen appears (see figure 2.1):