You are on page 1of 3

Prime Power 8kw / 10kva

GENERATOR SETS Standby Power 10kw / 12.5kva


NFS-10KVA 60hz Voltage available 220/110V 60Hz

Increased availability for new operations


Reliable, robust and versatile generator. Ready to deliver
power for a next job.
Increased uptime during operations
Once installed on the end-user-site, the generator will be
ready to run: “peace of mind” operation.

Reduced transport and installation costs


The compact and robust design with integrated transport
features enables faster and safertransport and installation.

Reduced service & maintenance costs


Longer service intervals.
Quicker and more efficient service jobs.

Premium resale value


Designed and built to last.

Ω SAFETY
● Operate safety in accordance with proper operation manual
● To prevent trouble and accidents perform daily and preventive
maintance checks without fail.

LIJIA Series
10-20kVA

Quality Standards
Our diesel generating sets meets the following standards: GB/T2820, GB1105, YD/T502, ISO3046, ISO8525, ISO8525-3-5-6.
Factory Test
Each our generating sets must be got through 1 hour load test for running 0%, 25%, 50%,75%, 100% and 110%
load before dispatch, All protective devices, control functions are simulated and it’s system checked, proved and
then passed for dispatch. A test certificate can be provided upon request.
Application:
• Special Telecommunication standby generating sets • Industrial generating sets
• Residential generating sets • Modular power systems
• Generating sets with lighting tower • Mobile power plant on truck
• Station power plant design and sipplies • Custom design to meet customer’s special application
Technical Data
Model Alternator--NIANFENG
Rated prime power kva 10 Model NIANFENG NFG164B
Rated standby power kva 12.5 STAMFORD
Rated voltage line to line V 220/110 Phase 3
Rated current A 14.5 Voltage V 220/110
Maximun sound level dB(@7m) ≤95 Wiring Type 3 Phase 4 wire, Y type
Bearing 1
Engine--LIJIA Power factor 0.8
Model SL2100ABD Frequency Hz 60
Air intake system Aspiration Prime power KVA 10
Fuel injection system Direct Inject Exciter Type Brushless, self-excitation
No. cylinders 2 Voltage regulation % ±0.5
Displacement Liquid 2.03 Protection Grade IP 23
Bore*Stroke mm 100*117 Insulation grade H/H
Compression ratio 18 Altitude m ≤1000
Rated speed r/min 1800 Controller-Copy SmartGen or Mebay
Max. power(with fan) Kw 18.7 Model HGM6110
Governor type Mechanical ◆Protective functions:
Start Motor V 12 ◆Low oil pressure
◆High water temperature
Exhause System ◆High/low voltage
Exhause gas flow m³/min / ◆High Engine Temperature and Overspeed.
Exhause gas temp ℃ 590 ◆Voltage regulator frequency regulator
Max back pressure kPa 10 ◆Emergency stop
◆Auto starting transfer
Air Intake System
Max intake restriction kPa /
Consumption m³/min /
Air flow m³/min /

Fuel System
100% load(Prime power) L/h 4
75% load(Prime power) L/h 3
50% load(Prime power) L/h 2 Control Module Option s
Fuel tank capacity L 45
Control Module Option----DEEPSEA / ComAp
Lubrication System ▲Auto generator control module
Total system oil capacity L / ▲Control module with" Three Remote Control" functions
Oil consumption L/h ≤4 ▲ATS auto load transfer screen
Min oil pressure MPa / ▲Synchronising control modules
(continuous operation) ▲Power output cabinet

Cooling System
Total coolant capacity L 28
Thermostat ℃ 85-92
Max top tank temperature ℃ 112

Standard Features
Standard Features Unit Dimensions(Basic unit)
LIJIA Engine ●
Radiator 40°C max,fans are driven by bel 24V charge alternator ●
Alternator: Single bearing alternator IP23; Insulation class H/H ●
Automatic starting ●
One set of air filter, fuel filter, oil filter ●
Main line circuit breaker/MCCB ●
Standard base fuel tank ●
Starting battery with connective wires ●
Exhaust system(Ripple flex exhaust pipe, exhaust siphon,
flange, muffler) ●
User manual ●
● Open Type
Options L*W*H mm 1400*780*960
Battery charger ○ Weight kg 450
Engine heater ○
Alternator heater ○
PMG ○
Water oil separator ○
Daily fuel tank ○
Remote control panel ○
External control box ○
○ Silent Type
L*W*H mm 2000*900*1150
Standard: ● Options:○ Weight kg 650

Warranty
Engine
12 months from date of purchase and 1000 hours.
Generator
12 months from date of purchase or 1000 hours
(whichever occurs first).

Trailer Option
L*W*H mm
Max loading weight kg

Manufacturer reserves the right to make changes in model, technical spefication, color, design, configurations
and accessories without notice.

You might also like