Professional Documents
Culture Documents
7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.
00000005981LF-000
TMR225-1
EOS Power
EMTEQ
Buy Now
Buy Now
Give us a call
1-855-837-4225 1-415-281-3866
International: 1-415-281-3866
1-555-555-5555
Arrow
Arrow Electronics,
Electronics, Inc
Verical Division
9201 East Dry Creek Road
P.O. Box 740970
Centennial,
Los Angeles, CO 80112
CA 90074-0970
This coversheet was created by Verical, a division of Arrow Electronics, Inc. (“Verical”). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
Radio Frequency Coaxial Cables
Gain Flexibility and Save Weight with
EMTEQ’s Coax Cables
EMTEQ’s proprietary, aircraft grade cable designs are significantly
lighter than many MIL-C-17 and RG cables, and are FAA and
OEM approved. There are two types of coax cables to choose
from to reduce aircraft weight and improve electrical performance
– TFLX high-temperature fluorinated ethylene propylene (FEP), or
PFLX low-smoke, zero halogen polyethylene (PE).
PFLX Cables
50 OHM Aircraft Grade Polyethylene (PE) Coax
EMTEQ P/N PFLX140-500 PFLX195-500 PFLX240-500 PFLX240-501 PFLX340-500 PFLX400-500 PFLX500-500 PFLX900-500
Attenuation (dB/100 ft. Nominal)
400MHz 12.82 6.8 5.62 4.95 3.46 2.6 2.03 1.05
1000MHz 20.28 10.9 8.79 8.13 5.70 4.0 3.31 1.70
1030MHz 20.58 11.0 9.05 8.32 5.89 4.2 3.40 1.80
1600MHz 27.76 14.0 11.0 10.88 7.59 5.2 4.27 2.20
4300MHz 47.00 24.0 22.0 18.54 13.62 9.1 8.15 3.80
Mechanical Properties
Weight (lbs./100 ft.) 1.4 2.6 3.8 4.5 7.4 8.4 11.8 26.6
Min. Bend Radius 0.35” 0.5” 0.75” 0.75” 0.85” 1.0” 1.25” 3.0”
Cable Construction
Center Conductor Strand SPC Solid SPC 7 Strand SPC Solid SPC 7 Strand SPC Solid BCCA Solid BCCA BC Tube
Dielectric Material FEP GIFP GIFP GIFP GIFP Foam PE GIFP GIFP
Shield #1 Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum
Shield #2 TC Braid TC Braid TC Braid TC Braid TC Braid TC Braid TC Braid TC Braid
Outer Diameter (OD) 0.140” 0.195” 0.242” 0.242” 0.340” 0.405” 0.500” 0.870”
TFLX Cables
50 OHM Aircraft Grade Fluorinated Ethylene Propylene (FEP) Coax
EMTEQ P/N TFLX130-100 TFLX165-100 TFLX205-100 TFLX225-100 TFLX295-100 TFLX410-100 TFLX480-100
Attenuation (dB/100 ft. Nominal)
400 MHz 11.4 7.7 6.1 5.6 3.71 2.5 2.2
1000 MHz 16.7 13.0 10.0 8.0 5.95 4.0 3.5
1030 MHz 18.1 13.2 10.3 8.1 6.1 4.1 3.7
1600 MHz 23.5 16.8 13.9 10.2 7.6 5.2 4.5
4300 MHz 39.1 29.0 25.5 18.0 13.8 9.0 7.6
Mechanical Properties
Weight (lbs./100 ft.) 1.5 2.47 3.2 4.1 7.2 15.0 19.4
Min. Bend Radius 0.65” 0.83” 1.0” 1.13” 1.5” 2” 2.4”
Cable Construction
Center Conductor 7/Strand SPC 19/Strand SPC 19/Strand SPC Solid SPC 7/Strand SPC 7/Strand SPC 7/Strand SPC
Air Spaced Tape Wrapped
Dielectric Material EPTFE EPTFE EPTFE EPTFE PTFE Tape
PTFE PTFE
Shield #1 Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum Bonded Alum
Shield #2 TC Braid TC Braid TC Braid TC Braid TC Braid TC Braid TC Braid
Outer Diameter (OD) 0.130” 0.165” 0.195” 0.220” 0.295” 0.415” 0.480”
Materials
Temperature Range
•• Brass per QQ-B-626
•• -55˚C to +200˚C
•• Beryllium copper per QQ-C-530
Quality Assurance
•• Silicone rubber per ZZ-R-765
•• Stainless steel 300 Series •• EN/JSIQ/AS9100:2004
•• Polytetrafluoroethylene per L-P-403 •• FAR Part 25
Finishes •• FAR Part 21 Subpart K
•• FAR Part 145
•• Silver plating per QQ-S-365
•• Gold plating per MIL-G-45204
•• Proprietary bright nickel
Abbreviations
BC: Bare Copper PE: Polyethylene (Low Smoke, zero
halogen, aircraft grade)
BCCA: Bare Copper Clad Aluminum
PVC: Polyvinylchloride
EPTFE: Expanded Polytetrafluoroethylene
SC: Silver Coated Copper
FEP: Fluorinated Ethylene Propylene
SPC: Silver Plated Copper
GIFP: Gas Injected Foam Polyethylene
TC: Tin Coated Copper
GIP: Gas Injected Polyethylene
VSWR: Voltage Standing Wave Ratio
OD: Outer Diameter
MIL Specification Comparison to PFLX Tool Frame & Die Part Numbers
PFLX240-501 RG214 Cable Type Hex Die Daniels Part No.
Attenuation (dB/100 ft.) PFLX175-075-01 * *
400 MHz 4.95 4.3 PFLX190-075-01 * *
1000 MHz 8.13 7.3 TFLX125-075-01 * *
Mechanical Properties TFLX180-075-01 * *
Weight (lbs./100 ft.) 4.5 12.6 PFLX140-500 B Hex* Y140
Min. Bend Radius .75” 2” PFLX195-500 B Hex Y142
Cable Construction PFLX240-500 A Hex Y141
Center Conductor Solid SPC 7/Strand SC PFLX240-501 A Hex Y141
Dielectric Material GIFP PE PFLX340-500 A Hex Y137
Shield #1 Bonded Alum SC PFLX400-500 A Hex Y178
Shield #2 TC Braid SC PFLX500-500 A Hex Y149
Outer Diameter (OD) .242” .425” TFLX130-100 B Hex Y140
Compare PFLX240-501 vs. RG214 TFLX165-100 B Hex Y142
Weight Savings: 64% TFLX205-100 A Hex Y141
TFLX225-100 A Hex Y141
TFLX295-100 A Hex Y137
TFLX410-100 A Hex Y148
TFLX480-100 A Hex Y151
value-added CapabilitieS
enSuRinG CoMpRehenSive SolutionS and SuppoRt FoR youR pRoGRaM’S SuCCeSS.
• Project and program management including on-site engineering support
• On-site technical support, 24-hour AOG support, and installation services
• In-house FAA DER, DAR, DMIR, and PMA certification expertise; FAA consulting services including DER major
alteration approval
• Product development, design, testing and analytical services
• FAA and EASA STC development and design data package development with FAA Partnership for Safety Plan and
sales/local authority certification approval coordination
• FAA and EASA approved structural repair development
• Transport Canada Aeronautical Products Manufacturer and Maintenance Organization approvals and Transport
Canada Design Approval Organization at ACS-NAI
• Subcontract manufacturing services to airframe manufacturers and maintenance organizations
Quality aSSuRanCe
EMTEQ’s global quality inspection programs comply with EN/JSIQ/AS9100:2004, ISO9001:2008, or EN9100:2003
standards, as well as airframe OEM standard compliance for the consistent production of high performance products.
EMTEQ has an approved FAA/EASA Part 145 Repair Station in New Berlin and an EASA Part 145 Repair Station in
Switzerland. EMTEQ’s New Berlin office is an FAA/PMA approved manufacturing facility. Additionally, we provide first article
inspection, customer drawing log and revision control, as well as warehousing and lot control of customer supplied parts.