Professional Documents
Culture Documents
Base Plate Report Sample PDF
Base Plate Report Sample PDF
= 2.21 Ksi
N direction:
= 9.5603 in vs. eN = -10. in
B direction:
= 9.5603 in vs. eB = 0 in
Classification:
Axial Compression with a Large Moment in the strong direction.
Page 1 of 3
VAConnect 1.00.0000
www.iesweb.com
Project: Base Plate 5 Billing Reference: 2200.025 IES Employee, IES File: Example Report.vcbp Monday, January 07, 2013
Base Plate w/ Large Strong-Axis Moment (AISC Design Guide #1, Section 3.4)
Load Set: Load Set 1
Load Combination: 1.4D
= 2.9515 in
= 0.71959 ft-K/ft
= 6.12 in
Figure shows bending lines of column and
Mu(n) calculation is a crude attempt at including some 2-way illustrates base plate under strong axis bending.
bending in the analysis. The approach is based on the note at Effective width shown by dashed lines.
the end of section 3.4.2.
Since Y < m
Page 2 of 3
VAConnect 1.00.0000
www.iesweb.com
Project: Base Plate 5 Billing Reference: 2200.025 IES Employee, IES File: Example Report.vcbp Monday, January 07, 2013
= 2.21 Ksi
f = 0.65
Support Strength, f'c = 4 Ksi
Loaded Area, A1 = 484 in^2
Support Area, A2 = 484.01 in^2
(The largest area contained on the support that is geometrically similar to and concentric with
the loaded area)
Page 3 of 3
VAConnect 1.00.0000
www.iesweb.com