Professional Documents
Culture Documents
Introduction To IPR and VLP
Introduction To IPR and VLP
production-technology.org/introduction-ipr-vlp/
The productivity of the well depends on an efficient use of the compressional energy
available in the reservoir allowing the reservoir fluids to flow toward the production
separator. As an introduction to IPR and VLP, this article will introduce two key
relationships (IPR and VLP) used in the design of the production system.
The intersection of the PI plot with the x-axis is the flow rate corresponding to a Pwf
equal to zero. This point in the IPR plot is known as the Absolute Open Flow (AOF)
potential of the well.
The following video shows more details about reservoir inflow performance:
1/3
https://youtu.be/MDHDswtu8BA
Vertical Lift Performance Relationship (VLP), named also Outflow, describes the
bottom-hole pressure as a function of flow rate. The VLP depends on many factors
including fluid PVT properties, well depth, tubing size, surface pressure, water cut
and GOR. It describes the flow from the bottom-hole of the well to the wellhead.
Both the Inflow Performance Relationship and the Vertical Lift Performance Relationship
relate the wellbore flowing pressure to the surface production rate. While the IPR
represents what the reservoir can deliver to the bottom hole, the VLP represents what
the well can deliver to the surface.
2/3
The intersection of the IPR with
the VLP, called the operating
point, yields the well
deliverability, an expression of
what a well will actually produce
for a given operating condition (Pr,
PI, WC, GOR, THP, Tubing size…).
3/3