This document discusses different types of liners used in deep well completions as an alternative to running multiple strings of casing from the wellhead. It describes four types of liners: drilling liners, production liners, stub liners, and scab liners. Drilling liners are hung inside a cemented casing string to case off open holes so deeper drilling can be done safely. The document outlines that upon reading it, the learner should understand the different liner types, how liners are set, cementing techniques, and how to calculate liner requirements.
This document discusses different types of liners used in deep well completions as an alternative to running multiple strings of casing from the wellhead. It describes four types of liners: drilling liners, production liners, stub liners, and scab liners. Drilling liners are hung inside a cemented casing string to case off open holes so deeper drilling can be done safely. The document outlines that upon reading it, the learner should understand the different liner types, how liners are set, cementing techniques, and how to calculate liner requirements.
This document discusses different types of liners used in deep well completions as an alternative to running multiple strings of casing from the wellhead. It describes four types of liners: drilling liners, production liners, stub liners, and scab liners. Drilling liners are hung inside a cemented casing string to case off open holes so deeper drilling can be done safely. The document outlines that upon reading it, the learner should understand the different liner types, how liners are set, cementing techniques, and how to calculate liner requirements.
In the past, it was common to have several C. Cementing Liners
strings of casing in a deep well. All these strings D. Liner Calculations extended from the wellhead to different depths. However, another method is now used for varying well conditions. This time, and money, Learning Objectives saving method involves the hanging of a casing string from the bottom of a cemented casing string. These hanging casing strings are called Upon completion of this section, you should be liners and they are used in almost every deep familiar with well completion. x The different types of liners x How liners are set Topic Areas x The different techniques of cementing liners
The section units are x How to perform liner cementing calculations
A. Types of Liners B. Setting Liners
Unit A: Types of Liners
Four types of liners will be described briefly to x isolates lost-circulation zones begin this section: x isolates high-pressure zones x Drilling (or intermediate) liners x Production liners x Stub liners x Scab liners
Drilling Liners
A drilling liner (sometimes called an
intermediate liner) is a string of casing that is hung from another casing of a larger diameter, which has already been cemented downhole (Fig. 6.1). It is used above a producing zone to case off open holes so that deeper drilling may be performed. A drilling liner x helps control water or gas production Figure 6.1 – Drilling and Production Liners.