Professional Documents
Culture Documents
Baseplate Typical
Baseplate Typical
Design of Base Plate (Highest loading found to be experienced by PR-05 and hence this design
has been considered as typical for all other baseplates)
Column section (W8 x 40) a (Portion considered in design
width 205 mm 300 3 edge fixed and 1 edge free)
depth 210 mm
Base Plate Projection from Column Flange b Z
x direction a 48 mm 300
z direction b 45 mm
Base plate size X
length 300 mm
width 300 mm
120
Allowable stresses
Concrete Compressive strength at 28days fc' 25 N/mm2 (Book III - Technical Specification Clause 4.4.2.5)
Allowable bearing stress in concrete = 0.35 fc' 8.75 N/mm2 (AISC (ASD) Manual - 1989, cl- J9)
Yield stress of steel of grade A36 250 N/mm² (Book III - Technical Specification Clause 4.4.10.3)
Allowable bending stress in plate (0.75 fy) fallow 187.5 N/mm² (Cl. F2 of AISC manual 1989)
Allowable Tensile stress in anchor bolt 138 N/mm² (From ASTM A307, Table J 3.2)
Allowable shear stress 69 N/mm² (From ASTM A307, Table J 3.2)
Bolt design
Bolt Dia. d 28 mm
No. of bolts n 4 no.
Tensile force per bolt T = Px / n 51.02 kN
Tensile stress in bolt ts T/(p*d2/4*0.7) 118.38 N/mm² < 138 safe
Design of Anchorbolt
Interaction Check