Professional Documents
Culture Documents
SSPC Vis 1 PDF
SSPC Vis 1 PDF
September 1, 1989
Editorial Changes September 1, 2000
3.1 The standards referenced in this guide are listed in (The full titles of the SSPCINACE joint surface prepa-
Section 3.3 and form a part of this guide. ration standards are provided in Section 3.3)
35
COPYRIGHT The Society for Protective Coatings
Licensed by Information Handling Services
SSPC-Guide to VIS 1-89
September 1, 1989
Editorial Changes September 1, 2000
TABLE 1
A B C D
100% Adherent Mill Scale 100% 100% Rust
Degree of Cleaning Mill Scale and Rust Rust With Pits
Standard photograph not provided due to wide variations in appearance possiblewhen brush-off blast cleaning adherent mill scale.
No photograph available becausethis condition cannot normally be attained when removing adherent mill scale.
The photographs contained in the Appendix depict the appearance of surfaces blast cleaned with alternate abrasives (see Note 7.2).
Alternate non-metallicabrasives: ASP 5-N1, ASP 5-N2, ASP 5-N3
Alternate metallic abrasives: ASP 5-M1, ASP 5-M2, ASP 5-M3
36
COPYRIGHT The Society for Protective Coatings
Licensed by Information Handling Services