Professional Documents
Culture Documents
Distribution Boards: A Perfect Blend of Aesthetics, Functionality and Safety
Distribution Boards: A Perfect Blend of Aesthetics, Functionality and Safety
Protection
S-series Distribution Boards offer two types of protection-IP42
degree with a metal door and IP20 degree without a door. The
highest degree of attention has been paid to the safety aspect of
the Distribution Boards, considering that they are installed in close
proximity to people. An intermediate plate ensures total safety, as
no live parts are exposed when the door is opened.
2 ABB
The Range
ABB 3
SHC – SPN Consumer Units
Horizontal single phase consumer unit with provision for 2 pole (MCB / Isolator / RCD) incoming and single phase outgoing.
These Distribution Boards come with neutral link, earth link and 100A tinned electrolytic copper busbar. Top and bottom, removable gland
plates with knockouts. Mounting of these boards can be flush or surface.
SHC M
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SHC M 4 175 100 195 2 x 26mm 2 x 26mm
6 SHC M 6 210 135 230 3 x 26mm 3 x 26mm
8 SHC M 8 250 175 270 3 x 26mm 3 x 26mm
12 SHC M 12 325 250 345 5 x 26mm 5 x 26mm
14 SHC M 14 365 290 385 5 x 26mm 5 x 26mm
16 SHC M 16 400 325 420 5 x 26mm 5 x 26mm
20 SHC M 20 475 400 495 5 x 26mm 5 x 26mm
4 ABB
SHC WD
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SHC WD 4 170 95 185 2 x 26mm 2 x 26mm
6 SHC WD 6 205 130 220 3 x 26mm 3 x 26mm
8 SHC WD 8 240 165 255 3 x 26mm 3 x 26mm
12 SHC WD 12 310 235 325 4 x 26mm 4 x 26mm
14 SHC WD 14 350 275 365 5 x 26mm 5 x 26mm
ACP
ABS thermo-plastic Acrylic Consumer Panel (ACP) with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing.
Suitable for flush mounting.
IP30 protection IP30 protection
Standard Ivory Colour – RAL 9010 Special Colour Light Grey – RAL 7035
Key features
n Basic cover made of ABS (an inflammable agent)
n 70% transparent cover made of PC
n High rigidity and toughness
n Excellent continuous heat resistance and good
performance in flammability
n Basic cover can resist 1800N in vertical cross-section
n Can be locked in the ‘open’ position
n When the transparent cover is closed, it can be
locked in the close position
One module is single pole size 90x17.5x68mm (HxWxD), i/c - incommer, o/g - outgoings
ABB 5
SHDB – TPN Distribution Boards
Horizontal three phase distribution board provision for incomer 8 pole (MCB / Isolator / RCD) and single phase outgoings.
These Distribution Boards come with neutral link, earth link, 100A tinned electrolytic copper busbar and wire sets for cable management.
Top and bottom, removable gland plates with knockouts. Mounting of these boards can be flush or surface.
SHDB M
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SHDB M 4 330 255 350 3 x 25mm 3 x 25mm 1 x 32mm
6 SHDB M 6 365 290 385 4 x 26mm 4 x 26mm 1 x 32mm
8 SHDB M 8 460 385 480 5 x 26mm 5 x 26mm 1 x 32mm
12 SHDB M 12 600 525 620 5 x 26mm 5 x 26mm 1 x 32mm
6 ABB
SHDB WD
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SHDB WD 4 330 255 345 4 x 25mm 3 x 25mm 1 x 32mm
6 SHDB WD 6 365 290 380 5 x 26mm 4 x 26mm 1 x 32mm
8 SHDB WD 8 460 385 475 6 x 26mm 5 x 26mm 1 x 32mm
12 SHDB WD 12 600 525 615 5 x 26mm 5 x 26mm 1 x 32mm
Description Type
reference
Single way 2 pole metal enclosure SEN 2P
Single way 4 pole metal enclosure SEN 4P
Single way 6 pole metal enclosure SEN 6P
SEN 4
No. of ways Type Dimensions (mm) Knockout holes
reference A B C Top Bottom
Single Way DP Enclosure SEN 2P 85 55 100 1 x 25mm 1 x 25mm
Single Way FP Enclosure SEN 4P 120 90 135 1 x 25mm 1 x 25mm
Single Way FP Enclosure SEN 6P 155 125 170 1 x 25mm 1 x 25mm
ABB 7
SHPPI – Horizontal per-phase Isolation Distribution Board
Horizontal per-phase Isolation Distribution Board with provision for 8 pole (MCB / Isolator / RCD) as incomer, 3 DP MCB / Isolator / RCD
as sub-incoming and SP MCBs as outgoing, supplied with wire set and separate neutral bars.
These Distribution Boards come with earthing link, 100A tinned electrolytic copper busbar and top and bottom removable gland plates
with knockouts. Mounting of these boards can be flush or surface.
Double door, IP42 protection
No. of Type reference Type reference Modules
ways for metal door for metal door
with acrylic window Incommer Outgoings
6 SHPPI M 6 SHPPI P 6 8 18
8 SHPPI M 8 SHPPI P 8 8 24
12 SHPPI M 12 SHPPI P 12 8 36
16 SHPPI M 16 SHPPI P 16 8 48
SHPPI M
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
6 SHPPI M 6 375 300 395 5 x 25mm 4 x 25mm 1 x 32mm
8 SHPPI M 8 470 395 490 7 x 25mm 6 x 25mm 1 x 32mm
12 SHPPI M 12 615 540 635 9 x 25mm 8 x 25mm 1 x 32mm
16 SHPPI M 16 760 685 780 12 x 25mm 11 x 25mm 1 x 32mm
8 ABB
SVTDB – Vertical TPN Distribution Board
Vertical three phase Distribution Board with provision for 8 pole (MCB / Isolator / RCD) incoming with three phase and single phase
(TP/SP) outgoing and complete insulated busbar arrangement and 200A tinned electrolytic copper busbar, neutral bar and earth bars.
Top and bottom, removable gland plates with knockouts. Mounting of these boards can be flush or surface.
SVTDB M / P
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SVTDB M 4 500 400 515 5 x 25mm 2 x 32mm 5 x 25mm 2 x 32mm
6 SVTDB M 6 550 440 565 5 x 25mm 2 x 32mm 5 x 25mm 2 x 32mm
8 SVTDB M 8 600 550 615 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
12 SVTDB M 12 700 650 715 5 x 25mm 4 x 32mm 5 x 25mm 4 x 32mm
SVTDB WD
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SVTDB WD 4 500 400 520 5 x 25mm 2 x 32mm 5 x 25mm 2 x 32mm
6 SVTDB WD 6 550 440 570 5 x 25mm 2 x 32mm 5 x 25mm 2 x 32mm
8 SVTDB WD 8 600 550 620 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
12 SVTDB WD 12 700 650 720 5 x 25mm 4 x 32mm 5 x 25mm 4 x 32mm
ABB 9
SVTDB T1 – Vertical TPN Distribution Board with MCCB incomer
Vertical TPN Distribution Board with provision for 4 pole MCCB as incomer and three phase / single phase (TP/SP) outgoing. For incoming
of 160A, ABB T-max MCCB type T1 is used with 200A tinned electrolytic copper busbar, neutral bar and earth bars. Top and bottom,
removable gland plates with knockouts. Mounting of these boards can be flush or surface.
Metal door, IP42 protection
No. of Type Modules
ways reference outgoings
4 SVTDB M 4T1 12
6 SVTDB M 6T1 18
8 SVTDB M 8T1 24
12 SVTDB M 12T1 36
Without door, IP20 protection
No. of Type Modules
ways reference outgoings
4 SVTDB WD 4T1 12
6 SVTDB WD 6T1 18
8 SVTDB WD 8T1 24
12 SVTDB WD 12T1 36
Note: For incomer of 160A use ABB T-Max MCCB, Type T1
Available on request: With 4 pole 250A MCCB as incomer (T3N), suffix the above with T3
SVTDB M T1
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SVTDB M 4T1 555 455 575 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
6 SVTDB M 6T1 609 509 629 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
8 SVTDB M 8T1 663 563 683 6 x 25mm 4 x 32mm 6 x 25mm 4 x 32mm
12 SVTDB M 12T1 771 671 791 6 x 25mm 5 x 32mm 6 x 25mm 5 x 32mm
SVTDB WD T1
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 SVTDB WD 4T1 555 455 570 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
6 SVTDB WD 6T1 609 509 624 5 x 25mm 3 x 32mm 5 x 25mm 3 x 32mm
8 SVTDB WD 8T1 663 563 678 6 x 25mm 4 x 32mm 6 x 25mm 4 x 32mm
12 SVTDB WD 12T1 771 671 786 6 x 25mm 5 x 32mm 6 x 25mm 5 x 32mm
10 ABB
SPS – Phase Selector TPN Distribution Board
Phase selector Distribution Boards with provision for mounting 3 nos. selector switches and 3 nos. piano switches as well as provision for
8 pole MCB / Isolator / RCD as incoming and SP MCBs as outgoing. 100A tinned electrolytic copper busbar supplied with wire set and
neutral bars and top and bottom removable gland plates with knockouts. Mounting of these boards can be flush or surface.
SPS M SPS WD
No. of Type Dimensions (mm) Knockout holes No. of Type Dimensions (mm) Knockout holes
ways reference ways reference
A B C Top Bottom A B C Top Bottom
4 SPS M 4 550 470 570 6 x 25mm 6 x 25mm 4 SPS WD 4 520 440 332 6 x 25mm 6 x 25mm
6 SPS M 6 585 505 605 7 x 25mm 7 x 25mm 6 SPS WD 6 555 475 367 7 x 25mm 7 x 25mm
8 SPS M 8 620 540 640 8 x 25mm 8 x 25mm 8 SPS WD 8 590 510 402 8 x 25mm 8 x 25mm
ABB 11
S7SEG – Seven Segment Distribution Board
Seven Segment Distribution Board with phase segregation and separation between incoming and outgoing with provision for 8P incomer
(MCB / Isolator / RCD) and 4 pole sub-incomer (MCB / Isolator / RCD) with single phase outgoing.
These Distribution Boards come with earthing link, neutral bar and wire sets for cable management for each compartment. Top and
bottom, removable gland plates with knockouts. Mounting of these boards can be flush or surface.
S7SEG M
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
4 S7SEG M 4 520 430 540 6 x 25mm 1 x 36mm
6 S7SEG M 6 620 530 640 9 x 25mm 1 x 36mm
8 S7SEG M 8 730 640 750 11 x 25mm 1 x 36mm
12 S7SEG M 12 940 850 960 14 x 25mm 1 x 36mm
S7SEG WD
No. of Type Dimensions (mm) Knockout holes
ways reference A B C D Top Bottom
4 S7SEG WD 4 491 376 485 159 6 x 20mm 1 x 25mm
6 S7SEG WD 6 596 481 590 194 7 x 20mm 1 x 25mm
8 S7SEG WD 8 701 586 695 229 9 x 20mm 1 x 25mm
12 S7SEG WD 12 911 796 905 299 12 x 20mm 1 x 25mm
12 ABB
SVFL – Tier Distribution Board
Total flexibility as per site needs – configuration as per your choice of incomer and outgoing. Supply busbars need to be selected. Top and
bottom, removable gland plates with knockouts. Mounting of these boards can be flush or surface.
SVFL M / P
No. of ways Type Dimensions (mm) Knockout holes
reference A B C Top Bottom
13 way 3 rows SVFL M 133 570 470 590 4 x 25mm 1 x 32mm 4 x 25mm 1 x 32mm
13 way 4 rows SVFL M 134 715 615 735 4 x 25mm 1 x 32mm 4 x 25mm 1 x 32mm
ABB 13
SVDB – Vertical per-phase Isolation Distribution Boards
Vertical per-phase Isolation Distribution Board in 4-tier structure with provision for 8 pole (MCB / Isolator / RCD) incomer and 2 pole
(MCB / Isolator / RCD) as sub-incomer with single phase outgoing.
Separate neutral links are provided for per phase isolation. These Distribution Boards come with earthing link, 100A tinned electrolytic copper
busbar and wire sets for cable management. Top and bottom, removable gland plates with knockouts. Mounting of these boards can be flush or
surface.
SVDB M
No. of Type Dimensions (mm) Knockout holes
ways reference A B C Top Bottom
6 SVDB M 6 325 250 345 4 x 25mm 1 x 36mm 4 x 25mm 1 x 36mm
8 SVDB M 8 375 300 395 4 x 25mm 1 x 36mm 4 x 25mm 1 x 36mm
12 SVDB M 12 450 375 470 5 x 25mm 1 x 36mm 5 x 25mm 1 x 36mm
14 ABB
Plug and Socket Distribution Board – SGK
This range offers a wide variety of plug sockets up to 63A. These plug sockets can be used for single phase or three phase along with
MCBs or RCBOs with provision for universal mounting.
Description Type
Reference
10A SP plug socket SGK 10 SP
20A SP plug socket SGK 20 SP
20A TP plug socket SGK 20 TP
32A TP plug socket SGK 30 TP
63A TP plug socket SGK 60 TP
20A DP plug socket for 2 pole RCBO SGK 20 DPR
20A FP plug socket for 4 pole RCCB SGK 25 FPR
63A FP plug socket for 4 pole RCCB SGK 60 FPR
SGK 10 SP / SGK 20 SP
SGK 20 DPR
ABB 15
The data in this brochure corresponds with our current expertise and intends to inform our customers about our products and their possible applications.
Since product improvement is a continuous process, the data furnished in this brochure may undergo revision.
For the latest information, you may contact our nearest sales office.
For Prices refer: Line Protection Devices Price List, effective from 17 June, 2004
DB/ATLV/02/2005/5000
ABB Limited
Low Voltage Products
No. A1, A2 & A4, 3rd Stage
Peenya Industrial Area
Bangalore - 560 058
Tel: +91-80-22949702 – 04
Fax: +91-80-28360349