Professional Documents
Culture Documents
2N3906 General Purpose Transistors: PNP Silicon
2N3906 General Purpose Transistors: PNP Silicon
General Purpose
Transistors
PNP Silicon
http://onsemi.com
Features
• Pb−Free Packages are Available* COLLECTOR
3
2
BASE
MAXIMUM RATINGS
Rating Symbol Value Unit 1
Collector − Emitter Voltage VCEO 40 Vdc EMITTER
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Base −Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) VBE(sat) 0.65 0.85 Vdc
(IC = 50 mAdc, IB = 5.0 mAdc) − 0.95
SMALL−SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) fT 250 − MHz
Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo − 4.5 pF
Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo − 10 pF
Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hie 2.0 12 kW
Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hre 0.1 10 X 10− 4
Small−Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hfe 100 400 −
Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hoe 3.0 60 mmhos
Noise Figure (IC = 100 mAdc, VCE = 5.0 Vdc, RS = 1.0 kW, f = 1.0 kHz) NF − 4.0 dB
SWITCHING CHARACTERISTICS
Delay Time (VCC = 3.0 Vdc, VBE = 0.5 Vdc, td − 35 ns
Rise Time IC = 10 mAdc, IB1 = 1.0 mAdc) tr − 35 ns
Storage Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) ts − 225 ns
Fall Time (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) tf − 75 ns
2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2%.
http://onsemi.com
2
2N3906
ORDERING INFORMATION
Device Package Shipping†
2N3906 TO−92 5000 Units / Bulk
2N3906G TO−92 5000 Units / Bulk
(Pb−Free)
3V
275
< 1 ns
+0.5 V 10 k
CS < 4 pF*
10.6 V
300 ns
DUTY CYCLE = 2%
3V
+9.1 V < 1 ns
275
10 k
0
http://onsemi.com
3
2N3906
TJ = 25°C
TJ = 125°C
10 5000
VCC = 40 V
3000
7.0 IC/IB = 10
2000
CAPACITANCE (pF)
5.0 Cobo
Q, CHARGE (pC)
1000
700
Cibo
3.0 500
300
2.0 200 QT
QA
100
70
1.0 50
0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 40 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200
REVERSE BIAS (VOLTS) IC, COLLECTOR CURRENT (mA)
500 500
IC/IB = 10 VCC = 40 V
300 300
IB1 = IB2
200 200
IC/IB = 20
t f , FALL TIME (ns)
100 100
70 70
TIME (ns)
50 tr @ VCC = 3.0 V 50
30 15 V 30
20 20 IC/IB = 10
40 V
10 2.0 V 10
7 td @ VOB = 0 V 7
5 5
1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
http://onsemi.com
4
2N3906
5.0 12
SOURCE RESISTANCE = 200 W f = 1.0 kHz IC = 1.0 mA
IC = 1.0 mA
10
4.0 IC = 0.5 mA
SOURCE RESISTANCE = 200 W
NF, NOISE FIGURE (dB)
0 0
0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100
f, FREQUENCY (kHz) Rg, SOURCE RESISTANCE (k OHMS)
Figure 7. Figure 8.
h PARAMETERS
(VCE = − 10 Vdc, f = 1.0 kHz, TA = 25°C)
300 100
hoe, OUTPUT ADMITTANCE (m mhos)
70
50
h fe , DC CURRENT GAIN
200
30
100 20
70
10
50
7
30 5
0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
20 10
h re , VOLTAGE FEEDBACK RATIO (X 10 -4 )
7.0
h ie , INPUT IMPEDANCE (k OHMS)
10
7.0 5.0
5.0
3.0 3.0
2.0 2.0
1.0
0.7
1.0
0.5
0.7
0.3
0.2 0.5
0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
http://onsemi.com
5
2N3906
2.0
h FE, DC CURRENT GAIN (NORMALIZED)
1.0 +25°C
0.7
-55°C
0.5
0.3
0.2
0.1
0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200
IC, COLLECTOR CURRENT (mA)
1.0
TJ = 25°C
0.8
IC = 1.0 mA 10 mA 30 mA 100 mA
0.6
0.4
0.2
0
0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10
IB, BASE CURRENT (mA)
1.0 1.0
q V , TEMPERATURE COEFFICIENTS (mV/ °C)
0
0.6 -55°C TO +25°C
-0.5
0.4 +25°C TO +125°C
-1.0
VCE(sat) @ IC/IB = 10 -55°C TO +25°C
0.2 qVB FOR VBE(sat)
-1.5
0 -2.0
1.0 2.0 5.0 10 20 50 100 200 0 20 40 60 80 100 120 140 160 180 200
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
http://onsemi.com
6
2N3906
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
NOTES:
A B STRAIGHT LEAD 1. DIMENSIONING AND TOLERANCING PER ANSI
BULK PACK Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
P BEYOND DIMENSION K MINIMUM.
L
SEATING INCHES MILLIMETERS
PLANE K DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
X X D G 0.045 0.055 1.15 1.39
H 0.095 0.105 2.42 2.66
G J 0.015 0.020 0.39 0.50
H J K 0.500 --- 12.70 ---
L 0.250 --- 6.35 ---
V C N 0.080 0.105 2.04 2.66
P --- 0.100 --- 2.54
SECTION X−X R 0.115 --- 2.93 ---
1 N V 0.135 --- 3.43 ---
NOTES:
A B BENT LEAD
R 1. DIMENSIONING AND TOLERANCING PER
TAPE & REEL ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
AMMO PACK 3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
P AND BEYOND DIMENSION K MINIMUM.
T
MILLIMETERS
SEATING
PLANE K DIM MIN MAX
A 4.45 5.20
B 4.32 5.33
C 3.18 4.19
D 0.40 0.54
X X D G 2.40 2.80
J 0.39 0.50
G K 12.70 ---
J N 2.04 2.66
V P 1.50 4.00
C R 2.93 ---
V 3.43 ---
SECTION X−X
1 N STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com 2N3906/D
7