Professional Documents
Culture Documents
1zz Valve Clearance PDF
1zz Valve Clearance PDF
ADJUSTMENT
A65077
A64021
(c) Remove the bolt and nut installing the engine wire.
A64022
A64023
A65078
A64058
A64856
Groove
A62185
A60622
A01045
A64005
A11858
Push
A62178
(d) Fix the camshaft with a spanner and so on, then loosen
Fix the camshaft timing gear set bolt.
Tighten NOTICE:
Be careful not to damage the valve lifter.
A62187
A62188
A32124
2 4 3 1 A62189
A32125
(i) Tie the timing chain with a string as shown in the illustra-
tion.
NOTICE:
Be careful not to drop anything inside the timing chain cov-
er.
A32556
Timing Mark
A62195
4 1 2 3 (n) Examine the front marks and numbers and tighten the
bolts in the order shown in the illustration.
Torque: 13 N⋅m (133 kgf⋅cm, 10 ft⋅lbf)
A62196
Painted Link (o) Put the camshaft No.2 on the cylinder head with the
painted links of the chain aligned with the timing mark on
the camshaft timing sprocket.
Timing Mark
A62197
A32124
(q) Examine the front marks and numbers and tighten the
7 bolts in the order shown in the illustration.
Torque: 13 N⋅m (133 kgf⋅cm, 10 ft⋅lbf)
(r) Install the bearing cap No. 1.
Torque: 23 N⋅m (235 kgf⋅cm, 17 ft⋅lbf)
6
5 3 1 2 4 A62198
(s) Fix the camshaft with a spanner and so on, then tighten
Fix the camshaft timing gear set bolt.
Tighten Torque: 54 N⋅m (551 kgf⋅cm, 40 ft⋅lbf)
NOTICE:
Be careful not damage the valve lifter.
A62187
(t) Check the match marks on the timing chain and camshaft
Mark Mark timing sprockets, and then the alignment of the pulley
groove with timing mark of the chain cover as shown in the
illustration.
Mark
Timing Chain
Cover Surface
Groove
A62185
Hook
Pin
A62177
A62178
Disconnect
Hook
Pin Turn
A62180
Push Turn
A62181
A11858
A64005
(c) Install the cylinder head cover and cable bracket with the
A A A 9 bolts, 2 seal washers and 2 nuts. Uniformly tighten the
bolts and nuts, in the several passes.
A
B
Torque:
B
A 11 N⋅m (112 kgf⋅cm, 8 ft⋅lbf)
B 9.0 N⋅m (92 kgf⋅cm, 80 in⋅lbf)
A
A A
A A
A65687
A64023
A64022
A65077