Bulletin # EC-8
UniWes/. Techspecs
UniWest 330 West Clark » Pasco, Washington 99301 * Phone (509) 544-0720 Fax (509) 544-0868
Cone Head Probe
The Cone Head special application prcbe was designed to measure coating
thickness on the complex curvatures found on turbine blades. Coating thickness is
measured before installation and after the blades have been in service to track
coating wear on the blades. An added benefit is that the cone head probe can also
be used for testing cracks on curvatures. A self leveling feature allows an eddy
current coil to stay normal to the surface through a wide range of convex and
concave surfaces. Substantial time and cost saving benefits are derived from testing
turbine blade coating thickness and curvatures for cracks without
removing the blades.
Along with the Cone Head Probe you'll also Absolute _ Differential
receive a hard shell travel case. Coil selection 1MHz = 1 MHz
includes standard absolute and differential in 2 MHz 2 MHz
frequencies ranging from 1 MHz to 6 MHz: 3MHz = 3 MHz
4 MHz 4 MHz
To order please ask for part #US-690 and specify 5MHz = 5MHz
coil selection and frequency. 6MHz = 6 MHz
(Updated 1723/01 )