Professional Documents
Culture Documents
Module 1 Outline Top page / index E 2.0 1 S CH -- Version No. has been changed. => Ver.2.0
When installing this machine and the options as When installing this machine and the options as a
system, system,
install them in the sequence shown on this list. install them in the sequence shown on this list.
E 2.0 23
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
2/18
Contents
Title Language Ver. Page Object Category
E 2.0 23 Old New
This is the outline of the installation procedure of the This is the outline of the installation procedure for the
bizhub PRO 920 system. bizhub PRO 920 system.
N CH For the detailed setup instructions of the main body For the detailed setup instructions of the machine
and options, be sure to follow each installation and options, be sure to follow each installation
manual for correct installation. manual for correct installation.
E 2.0 26
This page has a link to a document summarizing the This page has a link to a document summarizing the
important points when installing main body and notes when installing the machine and the options.
N CH
options. Please refer to it for an efficient and correct
Please refer to it for efficient and correct installation. installation.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
3/18
Contents
Title Language Ver. Page Object Category
Old New
3. User Operation E 2.0 45 S AD -- [3.3 Copy Screen: Application] page has been added.
Module 1 Outline 3. User Operation E 2.0 56 S AD -- [3.3 Copy Screen: Application] page has been added.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
4/18
Contents
Title Language Ver. Page Object Category
Old New
Control software version when bizhub PRO 920 was Control software version when bizhub PRO 920 was
certified by ISO15408 (EAL3) certified by ISO15408 (EAL3)
4. Security E 2.0 103 S AD
Image control program (I1) : 10-0000 Image control program (I1) : 10-0000, 20-0000
Controller control program (P) : 10-0000 Controller control program (P) : 10-0000, 20-0000
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
5/18
Contents
Title Language Ver. Page Object Category
Old New
Module 2 Copier Top page / index E 2.0 1 S CH -- Version No. has been changed. => Ver.2.0
1. Composition / Operation
E 2.0 4 S RE -- [(3) Functions] table has been replaced.
1.1 Specifications
F. Fusing roller speed switchover control (definition of F. Fusing roller speed switchover control (definition of
paper type) [Table] paper type) [Table]
(16) Fusing Section E 2.0 158 S CH Smooth paper / 62 to 71g/m2 : Exclusive A,F Smooth paper / 62 to 71g/m2 : Exclusive A
PPC paper / 62 to 71g/m2 : Normal Sael PPC paper / 62 to 71g/m2 : Exclusive I Sael
PPC paper / 72 to 90g/m2 : --/ Exclusive I PPC paper / 72 to 90g/m2 : --/ Normal Exclusive F
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
6/18
Contents
Title Language Ver. Page Object Category
Old New
E 2.0 5 A RE --
Link data of [Jig list (pdf)] has been replaced.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
7/18
Contents
Title Language Ver. Page Object Category
Old New
2. Field Service - Local ISW needs ISWTrns ver3.53E or later as PC - Local ISW needs ISWTrns ver3.64E or later as PC
Module 2 Copier E 2.0 26 S CH
2.3 Tech. Rep. Mode application. application.
(5) New/Important Tech. Rep. Mode (5) New/Important Tech. Rep. Mode
PM count : PM count :
c. OPC drum count [New] : Large size count c. OPC drum count [New] : Large size count
E 2.0 55 S CH
condition : condition:
Regardless DIPSW8-6 setting, count1 for single print Regardless DIPSW8-6 setting, count2 for single print
and count 4 for 2-sided print. and count 4 for 2-sided print.
E 2.0 62 A RE
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
8/18
Contents
Title Language Ver. Page Object Category
Old New
Module 3 Option Top page / index E 2.0 1 S CH -- Version No. has been changed. => Ver.2.0
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
9/18
Contents
Title Language Ver. Page Object Category
Old New
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
10/18
Contents
Title Language Ver. Page Object Category
Old New
Module 3 Option 3. FS-509/516/604 E 2.0 8 S RE -- [(1) Product Specifications] table has been replaced.
Conveyance section and main tray section are Conveyance section and main tray section are
common for FS-509 and FS-604. common for FS-509/516 and FS-604.
E 2.0 22 S AD
[Illustration]: [Illustration]:
Stacker section (FS-509) Stacker section (FS-509/516)
E 2.0 34-37 S AD (4) Stacker Section :FS-509 (4) Stacker Section :FS-509/516
E 2.0 43-45 S AD (5) Stapler Section :FS-509 (5) Stapler Section :FS-509/516
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
11/18
Contents
Title Language Ver. Page Object Category
Old New
[Illustration]: [Illustration]:
4. PI-501 E 2.0 11 S CR Tray upper limit sensor/Up (PS205) Tray lower limit sensor/Up (PS205)
Tray upper limit sensor/Lw (PS210) Tray lower limit sensor/Lw (PS210)
Punch waste box set sensor (PS304) Punch scraps box set sensor (PS304)
E 2.0 9 S CH
Punch registration home sensor (PS303) Punch shift home sensor (PS303)
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
12/18
Contents
Title Language Ver. Page Object Category
Old New
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
13/18
Contents
Title Language Ver. Page Object Category
Old New
Module 3 Option 5. PK-503/504/505 E 2.0 11 S CH Punch waste box section Punch scraps box section
E 2.0 15 S AD
[Illustration]:
[Illustration]:
Switch cam shape of 4 holes operation (only inside
Switch cam shape of 4 holes of 2-4 holes (Punch
2 holes) of 2-4 holes (Punch operation on a steady
operation on a steady basis)
basis)
[Table]:
[Table]: Sensor 2 : B5R
E 2.0 16 S CH Sensor 2 : B5R, 16KR Sensor 3 : A4R, A5, 8.5x11R, 8.5x14, 5.5x8.5, 8.5 X
Sensor 3 : A4R, A5, 8.5x11R, 8.5x14R, 5.5x8.5, F4 13,
8.25 X 13, 8.125 X 13.25, 8 X 13
[Illustration]: [Illustration]:
E 2.0 19 S CH
Punch encoder plate sensor (PS306) Punch encoder sensor (PS306)
Punch waste box full detection Punch waste box full detection
When punch waste box becomes full, punch waste When punch waste box becomes full, punch scraps
box full sensor (PS302) is turned ON and “Punch box full sensor (PS302) is turned ON and “Punch
waste box is full” information is transmitted to the scraps box is full” information is transmitted to the
main body. main body.
[Illustlation]: [Illustlation]:
Punch waste box sensor (PS304) Punch scraps box set sensor (PS304)
Punch waste box full sensor (PS302) Punch scraps box full sensor (PS302)
Punch waste box Punch scraps box
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
14/18
Contents
Title Language Ver. Page Object Category
Old New
Module 4 Controller Top page / index E 2.0 1 S CH -- Version No. has been changed. => Ver.2.0
E 2.0 2
This is the outline of the installation procedure of the This is the outline of the installation procedure for the
bizhub PRO 920 system. bizhub PRO 920 system.
N CH For the detailed setup instructions of the main body For the detailed setup instructions of the machine
and options, be sure to follow each installation and options, be sure to follow each installation
manual for correct installation. manual for correct installation.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
15/18
Contents
Title Language Ver. Page Object Category
Old New
This page has a link to a document summarizing the This page has a link to a document summarizing the
important points when installing main body and notes when installing the machine and the options.
E 2.0 4 N CH
options. Please refer to it for an efficient and correct
Please refer to it for efficient and correct installation. installation.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
16/18
Contents
Title Language Ver. Page Object Category
Old New
E 2.0 11 N CH [IP NIC Setting] has 14 setting items. [IP NIC Setting] has 16 setting items.
E 2.0 12
[IP NIC Setting] has 14 setting items. [IP NIC Setting] has 16 setting items.
N CH
Here, these are No.11 to No. 14 item. Here, these are No.11 to No. 16 item.
E 2.0 108
1 item [8) IC-203 is supported Tandem mode.] has
N AD --
been aded.
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
17/18
Contents
Title Language Ver. Page Object Category
Old New
[Object]S:Slide, N:Note, A:Attached file [Category]AD:Addition, CH:Change, CR:correction, RE:Replacement, DL:Deletion [Language]J:Japanese, E:English, JE:Both
18/18