Professional Documents
Culture Documents
365 EXCABADORA Diagrama Electrico B PDF
365 EXCABADORA Diagrama Electrico B PDF
Switch (Normally Closed): A switch that will open at a specified point (temp, press, etc.).
No circle indicates that the wire cannot be disconnected from the component.
Ground (Wired): This indicates that the component is connected to a grounded wire. The
grounded wire is fastened to the machine.
Ground (Case): This indicates that the component does not have a wire connected to ground.
It is grounded by being fastened to the machine.
Reed Switch: A switch whose contacts are controlled by a magnet. A magnet closes the
contacts of a normally open reed switch; it opens the contacts of a normally closed reed switch.
365C and 385C Excavator Sender: A component that is used with a temperature or pressure gauge. The sender
measures the temperature or pressure. Its resistance changes to give an indication to
Medium Pressure
It has a coil that makes an electromagnet when current flows through it. The
electromagnet can open or close the switch part of the relay.
Connector Serialization Codes Harness Connector Serialization Code: The "C" stands
for "Connector" and the number indicates which
connector in the harness. (C1, C2, C3, .....)
Part Number for
C-C4 AG-C3 Connector Plug AG-C4 L-C12 Part Number For
130-6795 130-6795 111-7898 3E-5179 Connector Recepticle
325-AG135 PK-14 1 5A
Pin Socket Fuse
Receptacle
Pin or Socket (5 Amps)
Single Wire
Number
9X-1123
Connector
Component
Part Number
Plug
Harness identification code: 2 200-L32 BK-14
This example indicates wire
Supplement Information to be used with: RENR7307 (365C) 135 in harness "AG".
Ground Circuit Identification
Wire Color
Wire Gauge
Connection Number
RENR7367 (385C)
© 2008 Caterpillar Printed in U.S.A.
All Rights Reserved
365C
12 Page,
(1) (13)
(1) (13)
POSITION 49
M932-BR
POSITION 50
POSITION 49 P941-WH (70)
M932-BR
POSITION 50 POSITION 60
P941-WH (70) P942-YL
POSITION 60
P942-YL
8 7 6 5 4 3 2 1
H-C6
F 2305010
JOYSTICK LH
2277569
F
M947-H11 OR-18 1 +8V
M948-H22 BR-18 2 GND
M949-H13 PK-18 3 SIG L/R
M950-H14 PU-18 4 SIG F/R
NOTE A:
5
6
H-C7 H-C8
2397352 2472693
M947-H12 OR-18 1 +B
M948-H23 BR-18 2 GND
M943-H9 YL-18 3 PWM OUT
M953-H24 BU-18 4 SW-COM C-C1(365C)LOCATION E-8 (SEE NOTE A) C-C31(365C)
M942-H8 WH-18 5 SW-1 C-C8(385C)LOCATION E-9 (SEE NOTE A) L-C4(385C)
K848-H4 WH-18 6 SW-2 1607689 VALVE CONTROL 1607690
E 1 1 E
H-C4 NOTE A: 2
3
2
3
7Y3967
4 4
320-H3 RD-18 1 5 5
6 6
H-C5 SW-3 7 7
7Y3967 8 8
9 9
200-H26 BK-18 1 10 10
11 11
(ATCH)CONTROL HANDLE LH 12 12
1777712 13 13
14 14
15 15
16 16
17 17
LH CONSOLE 18 18
19 19
20 20
21 21
22 22
D 23
24
23
24 D
25 25
26 26
27 27
28 28 SP-C1
29 29 1552269
30 30 P941-SP1 WH-18 1 BK-18 SOL.1
31 31 2 171-0028
32 32 M932-SP4 BR-18 M932-SP2 BR-18 BK-18
33 33
34 PIN 50: WIRE NUMBER FOR THE 365C IS M943-C165 YL-18 34 MED.PRESS CIRCUIT 1-A
35 WIRE NUMBER FOR THE 385C IS M943-C104 YL-18 35
36 36
37 37
38 38
39 39 SP-C2
40 40 1552269
41 41
42 42 M932-SP3 BR-18 1 BK-18 SOL.2
43 P942-SP5 YL-18 2 BK-18 171-0028
43
44 44
45 45 MED.PRESS CIRCUIT 1-B
C 46
47
46
47 C
48 48
49 PROD DR RET 49
M943-YL-18 50 LEVER TOP SW CONT LH-L MED.PRESS CIRCUIT 1-A 50
51 51
52 52
53 53 SYMBOL DESCRIPTION
G-C7 54 54 ABBREV COLOR
JOYSTICK RH
2305010 55 55
2277569 56 56 BLADE, SPADE, RING, RD RED
M947-G12 OR-18 1 +8V 57 57 OR SCREW TERMINAL WH WHITE
M948-G27 BR-18 2 GND 58 58 OR ORANGE
M944-BU-18 59 LEVER TOP SW FLOW CONT RH-R 59 CIRCUIT CONNECTED YL YELLOW
M962-G14 YL-18 3 SIG L/R
M963-G43 BU-18 4 SIG F/R
NOTE A: 60 MED.PRESS CIRCUIT 1-B 60 PK PINK
61 61
(Dimensions: 25 inches x 24 inches)
BK BLACK
5 62 62 CIRCUIT NOT CONNECTED GY GRAY
6 63 63 PU PURPLE
64 64 ELECTRICAL CONNECTION BR BROWN
65 65 TO MACHINE STRUCTURE
66 PIN 59: WIRE NUMBER FOR THE 365C IS M944-C146 BU-18 66 GN GREEN
G-C8 G-C12 BU BLUE
2397352 2472693 67 WIRE NUMBER FOR THE 385C IS M944-C127 BU-18 67 INTERNAL ELECTRICAL
B 68 68
B
RENR7057-01
G-C10 SW-3
7Y3967
L972-G8 BU-18 1
THIS SCHEMATIC IS FOR THE 365C AND 385C EXCAVATOR
(ATCH)CONTROL HANDLE RH MEDIUM PRESSURE (ATTACHMENT) 251-3502 V00
1777711
COMPONENTS ARE SHOWN INSTALLED ON A FULLY
A OPERABLE MACHINE WITH THE KEY AND ENGINE OFF A
RH CONSOLE NOTE A: REFER TO THE STANDARD ELECTRICAL
SCHEMATIC FOR THESE MACHINES
12 Page,
8 7 6 5 4 3 2 1