Professional Documents
Culture Documents
Whatsnew PE PDF
Whatsnew PE PDF
3
Grade Checker in AccuMark Explorer...................................................................3
Interactive Blocking and Buffering.........................................................................4
Insert Rule in the Alteration Editor ........................................................................4
Create new Model Options in the Model Editor.....................................................4
Support for SQL and MSDE Storage Areas in CSV..............................................4
Pattern Conversion Wizard available for PE-MWS ...............................................5
New Install License Dialog....................................................................................5
Pattern Design 8.0.7™........................................................................6
Distributing and Combining darts on the same line...............................................6
File/Save Duplicate Point Message ......................................................................6
V8 Pieces in V7 Model..........................................................................................7
(MK/V8) Tag Added to Some Functions ...............................................................7
AM-GMS ...............................................................................................................8
What’s New 8.0.5 ....................................................................................9
Documentation ..................................................................................................9
Install License ...................................................................................................9
Editors .................................................................................................................9
Enhanced Annotation ........................................................................................9
Expanded Notch Types and limits ...................................................................11
Rule Table Search...........................................................................................12
MicroMark Conversion Utility .......................................................................12
Marker Making ................................................................................................13
Interactive override of Block / Buffer values ....................................................13
Add New Bundle/Add New Size ......................................................................14
Attach Marker ..................................................................................................14
Marker Import ..................................................................................................14
New Tilt Limits .................................................................................................15
Marker Plot Parameter Table ......................................................................15
AutoMark ..........................................................................................................15
Cut Generation ...............................................................................................16
Batch Processing ...........................................................................................16
Hardware Configuration Tablet Options ...................................................17
AM-Explorer.....................................................................................................17
User Environment Tables ................................................................................17
Rename Utility .................................................................................................17
Backups ............................................................................................................17
SQL ...................................................................................................................17
Pattern Conversion Wizard - ASTM ...........................................................17
Pattern Design 8.0.5™......................................................................18
Additional Annotation Lines .........................................................................18
Conversion between MicroMark and AccuMark ..............................................18
Page 1 of 21 4/28/2004
Support for up to 99 Notch Types ..............................................................19
Long Names and Extensions for Plot Files ..............................................19
Enhancements to Add Dart with Fullness ................................................19
Plotting Multiple Size Codes Stacked ........................................................19
Long Size Names when converting MK data to AM ...............................20
New Message in Copy Model......................................................................20
Deleting points in Silhouette Line/Curve ...................................................21
New option in Grade Checker .....................................................................21
Page 2 of 21 4/28/2004
AccuMark Professional Edition™
What’s New 8.0.7
Grade Checker in AccuMark Explorer
Page 3 of 21 4/28/2004
Interactive Blocking and Buffering
Now, the Interactive Block/Buffering can be used for markers that do not have
Blocking and/or Buffering set up in the Order (Lay Limits and Block/Buffer table).
In addition, it is possible to change a blocked piece to a buffered piece.
A new function Insert, has been added to the Rule menu in the Alteration Editor
which allows a new rule will be added before the rule that is selected.
When adding a new Model Option, you can choose it’s location amongst existing
options. The new Model Option is inserted after the currently selected option.
Page 4 of 21 4/28/2004
Pattern Conversion Wizard available for PE-MWS
The Install License dialog has been updated with a reminder to verify your
system’s date and time before installing your license file. This will avoid potential
security problems on a system that does not have the date and time set correctly.
A Validate button has been added to perform checks on your license file and key.
Error messages are displayed if it cannot read the key or license file, or if your
license file and key do not match.
Page 5 of 21 4/28/2004
What’s New
Pattern Design 8.0.7™
Changes since 8.0.5
When using Distribute Same Line to distribute a dart, the new darts are now
added at the same angle as the original dart rather than being added
perpendicular to the open point. In the example below the original dart apex is
adjusted so that dart remains balanced; the dart length is maintained and the
apex is adjusted so that the dart legs remain equal.
The Duplicate point ID message that may display when saving data now
indicates the piece name(s) and point number(s).
Page 6 of 21 4/28/2004
V8 Pieces in V7 Model
In Previous releases, it was possible to save a V8 piece in a V7 model. A
message has been added to notify of this situation.
These functions have been identified by adding (MK/V8) next to the function
name in the drop down menu. The list includes a few corner types that were
previously only available for MicroMark data. In earlier versions these functions
had only a (MK) or (AM) next to the function name. These functions include:
Additionally, the function Rename Sizes has had an (AM) placed after the
function to indicate that this functionality is only available for data saved in the
AccuMark format.
Page 7 of 21 4/28/2004
Improvements to notch and point selection in Copy Grade
Changes have been made for selecting a “Target” point that is a Standard Notch,
where both a notch and a base point exist at the same location. The Target point
selection is based on the source selection. If the source selection is a point, the
system will only allow points to be selected for the target selection. If the source
selection is a notch, the system will only allow notches to be selected for the
target selection.
For example, Copy grade rule can now copy the grade rule of the notch base
point for standard notches. If there is a notch and a notch base point at the same
location, the system selects whichever one has a grade rule.
AM-GMS
Preferences have been added to the AE-GMS and PE-GMS workstations. See
the On Line Help for information on each of the settings.
Page 8 of 21 4/28/2004
AccuMark Professional Edition™
What’s New 8.0.5
Documentation
All previous version 8 What’s New changes are now documented in the Training
Docs folder on the installation CD.
Install License
Now displays the key number when the Install License application is started.
If no key is attached, or if it cannot read the key, '0' will be displayed in the key
text field.
Editors
Enhanced Annotation
Annotation in the AccuMark has been enhanced to include 154 line labels that
may be assigned standardized text in the Annotation editor. This allows
frequently used annotation to be standardized and quickly assigned to one or
multiple pieces.
Page 9 of 21 4/28/2004
MicroMark annotation file indexes 1-154 will be converted to AccuMark internal
types 100-254. MicroMark annotation file indices 155-255 will not be
converted. The MicroMark annotation indices must be changed to fall within the
valid range 1-154 before using the Annotation Converter.
LBA and LBB can be added in the Annotation editor to add annotation line
characteristics.
The new line labels can also be selected in the piece plot and marker plot
parameter tables using drop down selections for labels 100- 254
Page 10 of 21
4/28/2004
Expanded Notch Types and limits
Increased the total number of notches to 99 entries in the notch parameter
table. In previous versions, only supported 5 notch types per marker. Now
it supports 99 notch types per marker.
Page 11 of 21
4/28/2004
Rule Table Search
Rule Table search now includes the rule number in the results display.
Page 12 of 21
4/28/2004
Marker Making
Auto process for Marker Plot and Cut generation is now active inside marker
making. Set the Process Preferences in AM-Explorer to Auto process and
generate a marker plot or cut file directly to the desired location
After selecting the piece to Block-Buffer Override, a Pop Up dialog box will
appear. The user should choose the Rule type (either Block or Buffer) and then
define on which side of the piece the rule will be applied (left, right, top, bottom).
Markers that contain this feature will not be compatible with previous release of
the software –pre-805. A marker that uses this functionality CANNOT be Cut or
Plot on earlier versions of AccuMark software.
To improve the quality of the MicroMark marker import function, all block buffers
from a MicroMark marker are imported using the new override function.
Page 13 of 21
4/28/2004
Add New Bundle/Add New Size
The new Bundle/Add New Size function allows user to add a size that was not
originally ordered in the marker. This feature regenerates the marker and has the
same limitations as copy marker - some pieces may unplaced, split pieces will
join.
Attach Marker
This modified function allows now to attach markers of different widths.
Marker Import
MicroMark marker import will now import up to 99 notch types.
Page 14 of 21
4/28/2004
New Tilt Limits
Customer now has the ability to set different values for clockwise and counter-
clockwise tilt limits in the Laylimits table.
AutoMark
In AutoMark, it is now possible to have the marker report and the marker layout
printed on the same page.
Page 15 of 21
4/28/2004
Cut Generation
Added back missing functionality of exporting cut data to a dos file format 8.3
using the - as identifier of the dot. This new cut option has been added in the
form of a check box labeled "DOS Format for Export Cut File" in the Cut Options
dialog box. When using this function do NOT check the SAVE box on the cut
generation form.
When checked, the input marker file name will be converted to a DOS style 8.3
filename that will be used to name the cut file. The method used to create the
cut file name is identical to the method used in the old System Management.
Note that if a DOS Extension is also specified in Cut Options, the new cut
filename will be created and then the specified file extension will replace the
newly created file extension.
Batch Processing
Added the ability to use function key F2 to open the annotation editor, p-marker-
plot and p-cutter tables from the Batch parameter table.
Page 16 of 21
4/28/2004
Hardware Configuration Tablet Options
A new option has been added to Tablet/Menu Position. The choices are now
Lower Left, Lower Right, Custom, Center and Float. Custom locks the menu to
an X & Y position where Float orients the menu position to the proximity of the
stylus pen.
AM-Explorer
Rename Utility
Save as with Components now renames the pieces on the options page that
match the main page of the model editor.
Renaming will only occur if the piece has been renamed on the first page. Any
other pieces in the options will not be affected. For example, if piece “ladiesfront”
is renamed to “womensfront” and an option uses “ladiesfront” and a piece “lapel”,
only the ladiesfront piece would be renamed.
Backups
Backups can now be scheduled to run more than once during the week.
Previously you could only schedule the backup to run one day of the week.
SQL
The new User Id history feature has been implemented for SQL/MSDE storage
areas. It will use the System User Id of whom you are logged into the system.
Example: <ccc\username>.
When importing styles with notch types that don't exist in the P-notch table
- the conversion will create the notches in the notch parameter table
during conversion.
Page 17 of 21
4/28/2004
ASTM can now import up to 99 different notch variations.
What’s New
Pattern Design 8.0.5™
Changes since 8.0.4
Internal lines may now be assigned labels 100-254 in Pattern Design. The lines
behave like “A” Annotation lines in the AccuMark and the Annotation table now
supports labels 100-254. Please see the AccuMark section of the What’s New
for additional details.
When MicroMark styles are saved as AccuMark data using either Pattern Design
or the Style Converter utility, MicroMark annotation lines with indices 1-154 are
converted to AccuMark internal line types 101-254. MicroMark annotation lines
with indices 155-255 are converted to internal line type A. MicroMark annotation
lines with an index of 0 are converted to an A line, allowing basic annotation
information and locations to be transferred. When AccuMark data is saved as
MicroMark data, the internal line types 100-254 are converted to MicroMark
annotation lines with indices 0-154. This allows the annotation to be preserved
for conversion in both directions.
Page 18 of 21
4/28/2004
Support for up to 99 Notch Types
AccuMark Notch tables now support up to ninety-nine (99) different notches
which may now be assigned in Pattern Design. When data with Notch types
greater than 5 are opened in Classic AccuMark, 2.0.x series, or versions of 8.0
prior to 8.0.5, the notches will become notch type 5.
It is now possible to select multiple sizes from the size code table in the functions
Create Altered Size, Plot Altered, and Show Actual Sizes + Alterations. This
allows multiples sizes to be shown and plotted stacked for easy comparison. For
example, multiple inseam alterations for a pant leg may be stacked and viewed
or plotted for easy comparison. This is similar to the MicroMark functionality of
selecting a range of Variation sizes to display
Page 19 of 21
4/28/2004
Long Size Names when converting MK data to AM
A new message has been added when a Style being saved as AccuMark has
non-base sizes longer than the six character permitted in AccuMark.
When converting Styles to Models using the Style Converter utility, the utility will
report an error message that the size names are too long and will not save the
data. In such cases, the sizes should be renamed in the appropriate MicroMark
tables.
When converting single styles by retrieving and saving in Pattern Design, the
following steps are recommended:
1. Retrieve Style
2. Save As Model (System will prompt that size names are too long)
3. Place all pieces into the workarea and select Grade\Edit Size
Line\Rename Size
4. Select All pieces in the workarea and rename sizes as needed so that all
sizes are six characters or less.
5. Save the Style as an AccuMark Model
Note: rename cannot be used on MicroMark data until after you have
attempted to save it as AccuMark. This is to maintain the integrity of the
MicroMark data.
Page 20 of 21
4/28/2004
• If “Yes” is selected, then the Copy Model function will continue.
• If “No” is selected, then you will return to the rename dialog and the
destination pieces that have not been renamed will be highlighted and
may be edited.
This new message prevents users from accidentally changing the model name
without changing the piece names and helps to make sure that the same piece is
not referenced by multiple models unless the user specifically intends to do that.
Page 21 of 21
4/28/2004