Benha Faculty of Engineering Strength & Testing of Materials
Mechanical Engineering Department 2nd Year Mechanical Engineering Dr. Abdalla M. Abdalla Sheet # 6
1) For the cantilever steel beam [E = 200 GPa; I =
129 x 106 mm4] shown, use the double- (a) integration method to determine the deflection at B. Assume that L = 3 m, M0 = 70 kN.m, and w = 15 kN/m.
(b)
2) For the cantilever steel beams [E = 200 GPa; I =
129 x 106 mm4] shown, use the double- 4) For the beam and loading shown, integrate integration method to determine the deflection the load distribution to determine (a) the at A. Assume that L = 2.5 m, P = 50 kN, w0 = equation of the elastic curve. (b) the 90 kN/m, and w = 30 kN/m. deflection midway between the supports. (c) the slope at the left end of the beam. (d) the (a) support reactions Ay and By. Assume that EI is constant for the beam.
(b)
3) For the beams and loadings shown, integrate the
load distribution to determine (a) the equation of the elastic curve. (b) the deflection at the left end of the beam. (c) the support reactions By and MB. Assume that EI is constant for the beam.