Professional Documents
Culture Documents
c) I,J,K d) L,M,N
a) one b) two
c) three d) four
Q Write the CNC part program for the component given fig-2. Provide the 8
a) details on tools, operation sequence and processes. Assume suitable data and
Question Bank CAD/CAM
Mention clearly.
Q Write the machining codes for following machining operations (MCQ) 10M
Question Bank CAD/CAM
A. For Rapid Travel - a. G00 b.G33 c. G44 d. G01.
B.D0 loop- a. G24 b. G25
c.G22 d. G23 C. Tool Length offset value
a. G17 b.G04 c. G10 d.G18 D. References Point Return
Check. a. G27 b.G13 c.G20 d.G26
E. Inch Programming. a.G70 b.G71 c.G69
d.G72 F. End of program
a.M00 b.M01 c.M02 d.M04 G. Tool change.
a.M04 b.M06 c.M05 d. M08 H. Spindle anticlockwise and
coolant on a.M14 b.M16 c.M21 d.M13\
I. Absolute positioning
a.G18 b.G84 c.G91 d.G90
J. End of Tape -
a.M30 b.M31 c.M27 d.M32.
Question Bank CAD/CAM
A. Write a manual program for drilling holes as shown in 7M
fig.1. The spindle is initially positioned at the lower left
corner of the job. The actual drilling once position is
achieved manually by the operator.
Fig-2
B. Write the CNC part program for the component given fig- 8M
2. Provide the details on tools, operation sequence and
processes. Assume suitable data and Mention clearly.
Fig-2
Q. Attempt following
1. Define Automation? What are its types? 4
2. What is Group technology? What are its advantages & disadvantages 5
3. Explain FMS? Describe its elements & merits and demerits of FMS 8
4. Explain CIM. 4
5. Write a note on – concept of machine cell 4
Q MCQ 4