Professional Documents
Culture Documents
COLLEGE OF ENGINEERING
Karvenagar, Pune
Accredited with ‘A’ grade by NAAC | Recipient of ‘Best College’ award by SPPU in 2018-19
DEPARTMENT OF ENGINEERING SCIENCES
Unit No – 2
Introduction to 2D & 3D Computer Aided Drafting Packages
Explanation: Control+2 gives design centre palette, control+3 gives tools palette.
Control+4 is not an option.
3. AutoCAD was first released in the year:
a) 1858
b) 1966
c) 1898
d) 1982
Answer: d
Explanation: It was released in December 1982. It was a desktop app
running on micro-computer with internal graphics controllers.
4. How many units are available in AutoCAD?
a) 4
b) 5
c) 7
d) 6
Answer: b
Explanation: The units are architectural (feet & inches), decimals,
engineering (inches), Fractional and scientific (10e form).
5. Which mode allows the user to draw 90o straight lines :
a) Osnap
b) Ortho
c) Linear
d) Polar tracking
Answer: b
Explanation: Ortho mode can be activated using F8 Key. It enables user to
draw straight lines (90o) by restricting the cursor to 90o only.
6. To obtain parallel lines, concentric circles and parallel curves; _________ is
used.
a) Array
b) Fillet
c) Copy
d) Offset
Answer: d
Explanation: It can be activated by typing letter O. The offset distance and
side is to be specified by the user.
7. The default grid spacing in both X and Y directions is:
a) 10
b) 20
c) 5
d) 15
Answer: a
Explanation: The spacing in each grid is 10 in both direction. It can be
altered by right clicking on the grid button at the bottom of the screen. A
grid settings dialogue box will appear and changes can be made.
8. How many workspaces are available in AutoCAD?
a) 2
b) 4
c) 3
d) 5
Answer: c
Explanation: There are three workspaces available to switch between in
AutoCAD. These are drafting and annotation, 3D basics and 3D modeling
9. Scale command can be accessed easily by typing:
a) SL
b) S
c) SC
d) C
Answer: c
Explanation: Scale command is used to increase/decrease the size of an
object. It can be accessed by typing SC. To increase scale, value greater than
1 is given. Values between 0 and 1 can be used to decrease scale.
10.Which command is used to divide the object into segments having
predefined length?
a) Divide
b) Chamfer
c) Trim
d) Measure
Answer: d
Explanation: Measure command divides the object into segments of
predefined length. Divide option divides object into n number of equal
segments
11.How many grip points does a circle have?
a) 5
b) 4
c) 3
d) 2
Answer: a
Explanation: A grip point appears as blue colour when an object is selected.
Using these, an object can be modified. A circle has 5 trip points. One in
centre, 4 at each quadrant.
A. 0,1
B. 1,0
C. 0,0
D. 1,1
Answer: c
19.Fillet command can be utilize to obtain_________?
A. Round corners
B. Sharp corners
C. Both of the above
D. None of the above
Answer: c
20. A polar array generate new objects____
A. In a grid pattern
B. In a straight line
C. In a circular pattern
D. All of the above
Answer: c
21. Scaling a material make them______
A. Bigger
B. Smaller
C. Either smaller or bigger
D. None of the above
Answer: c
22. From the following Which is corresponded to the zoom mouse wheel?
A. scale
B. pan & scan
C. extents / all
D. Zoom in / zoom out
Answer: D
23. What command pass us to select objects based on some status_____?
A. Properties
B. Pselect
C. Qselect
D. Attributes
Answer: C
24. Which is the file extensions cannot open the AutoCAD _____?
A. dwg
B. dot
C. dxf
D. dws
Answer: B
25. When should I use the Block Editor ____?
A. To write text block
B. To fix dynamic block
C. To fix outer block
D. To store it in another version of AutoCAD
Answer: B
26. What do the letters UCS ____?
A. Uniform Calculator System
B. United CAD System
C. Universal Coordinate System
D. Universal CAD Settings
E. None of these
Answer: C
27. What is the difference between Print and command Plot ____?
A. plot command prints only big plans
B. The plot command for CNC (CAM)
C. print command can print up to A3 size paper
D. No difference
Answer: D
28. Which is NOT a unit of length measurement_____?
A. Yards
B. Parsecs
C. Grads
D. Microns
Answer: C
29. What does command Wblock ____?
A. Warp-speed block
B. Window block
C. Write block
D. Wide-area block
Answer: C
30. Where should you pay concentration when you are working with
AutoCAD commands?
A. Drawing area
B. Status bar
C. Command window
D. Tool bars
Answer: C
31. How many points do you need to know for the rectangle command?
A. One
B. Three
C. Two
D. Four
Answer: C
32. When drawing in 2D, what axis do you NOT work with?
A. X
B. Y
C. Z
D. WCS
Ans: C
33. The primary difference between the Model tab and the Layout tab(s)
is ____.
A. the Model tab is used for drawing in 3D and a Layout is used for
drawing in 2D
B. the Model tab is where you create the drawing and a Layout tab
represents the sheet that you will plot or print on
C. the color of the background
D. the Model tab displays the drawing you are copying from and the
Layout tab is where you lay out the new drawing
Ans: B
34. Autocad was developed by
● Microsoft Corp.
● Apple Inc.
● Autodesk Inc.
● None of the above
● November 1982
● December 1982
● December 1983
● December 1981
● 3D basics
● 3D modelling
● Drafting and Annotation
● All of the above
Answer: DWG
● Ctrl + 1
● Ctrl + 2
● Ctrl + 3
● Ctrl + 4
Answer: Ctrl + 1
● ARC
● POL
● REC
● CO
Answer: REC
41. .......... key automatically activates the O snap feature of AutoCAD.
● F1
● F2
● F3
● F4
Answer: F3
42.Which of the following command will allow us to use the Dynamic Input
command of this software?
● F12
● F10
● F11
● F9
Answer: F12
43. In which bar do you find the “Snap & Grid” icon?
a) Draw Toolbar
b) Modify Toolbar
c) Status bar
d) Object Properties Toolbar
Answer: c
a) Relative
b) Polar
c) Direct distance
d) All of above
Answer: D