Professional Documents
Culture Documents
SECTION-A [20*1.5=30]
Attempt all questions:
3. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln
4. When entering absolute coordinate numbers at the command line, the coordinates are preceded by:
(a) The letter a (b) The symbol @ (c) The letters ab
(d) There is no need to enter anything in front of the coordinate numbers
5. A polar array creates new objects____
(a) In a circular pattern
(b) In a grid pattern
(c) In a straight line
(d) All of the above
6. When using the Stretch tool:
(a) Circles can be stretched into ellipses
(b) The tool has no effect upon circles
(c) Be careful because circles can be erased
(d) Treat circles like any other part of the drawing being stretched.
10. Is it possible to form unions between solids constructed using the Extrude tool and solids formed
using the 3D Objects tools?
(a) Yes
(b) No
(c) Only when the 3D Objects tool is the Box or Sphere tool
(d) Only when the 3D Objects tool is the Cone tool.
11. When calling the Extrude tool the following abbreviation can be entered at the command line::
(a) ex
(b).extr
(c) There is no abbreviation. The name extrude must be entered in full
(d) ext.
13. What is the difference between the Scale command from the command Zoom
(a) Scale for single object, while the Zoom whole plan
(b) No difference
(c)H Scale can grow / shrink a shape up 10 times, while the Zoom has no limits
(d) H Scale changes the size of objects, while the Zoom changes the visibility of the project
15. Where should you pay attention when you are working with autocad commands?
(a) Drawing area
(b) Status bar
(c) Tool bars
(d) Command window
19. How many points do you need to define for the rectangle command?
(a) One
(b) Two
(c) Three
(d) Four
SECTION-B [5*3=15]
Attempt all questions: