Professional Documents
Culture Documents
iNet Docs
Please follow the procedures below to access the Uboot Web UI and re-install the rmware:
1. Connect
Connect only one cable to your router, and leave the other port (LAN or WAN) unconnected.
3. Lights
The LEDs will start blinking.
4. Release
Release your nger when you see the LEDs ashing: - 5 times for GL-AR150 and GL-AR300M16
5. Set IP
Set your computer’s IP address to 192.168.1.2 (see the cap-screen of Win 7 below)
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 1/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
6. Enter Web UI
User Firefox or Chrome to visit http://192.168.1.1 (http://192.168.1.1). Then you will enter Uboot Web UI.
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 2/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
7. Update
Click Choose File to nd the rmware. Then click Update rmware. You can download the rmware here:
http://download.gl-inet.com/ rmware/ (http://download.gl-inet.com/ rmware/)
8. Upgrading
Wait for around 3 minutes. Don’t power off your device while upgrading. Revert the IP setting you did in step 5
and you will be able to access the router via 192.168.8.1 again.
17 Comments glinet
1 Login
LOG IN WITH
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 3/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
Name
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 4/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 5/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
Are you doing the same? For AR150, when you want to
enter uboot web failsafe. Please note, when the LED
flash 5 times and another LED light up, release your
finger.
△ ▽ • Reply • Share ›
△ ▽ • Reply • Share ›
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 6/7
10/29/2019 Debrick via Uboot - GL.iNet Docs
https://docs.gl-inet.com/en/2/troubleshooting/debrick/ 7/7