Professional Documents
Culture Documents
HiTEC-833 PDS PDF
HiTEC-833 PDS PDF
HiTEC® 833
Ashless Antiwear Additive
Recommended Dosage
HiTEC® 833 may be used between 0.1% wt. and 2.0 % wt. depending
on the application. Please contact your Afton Chemical representative
for specific recommendations.
HiTEC® 833 in Fully Formulated Aluminum Complex and Lithium Complex grease
Li-Complex Grease with
Al-Complex Grease 4.5% wt. HiTEC® 552G
HiTEC® 833, % weight 0 0.5 1.0 1.5 2.0 0 0.5
Fretting Wear (D4170), mg 30 19.5 14.3 11.1 4.2 39.9 10.9
4 Ball EP (D2596), kg weld 250 250 250 315 315 315 315
© 2011. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 07/11.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.