You are on page 1of 1

Error List for Model BRAZOS COUUNTY TRIAL 1

Error 1 - Cantilever end supported by Beam #8 on Layout Type PL1 0FT.


Cantilever End-point Coords ( in ) are (270.000,607.625)
User Action: Delete Beam and re-enter.

Error 2 - Right End of Cantilever on Beam #11 not framed on Layout Type PL1 0FT.
Beam Coords ( in ) are (270.000,287.875), (270.000,607.625)
This will cause an error because it occurs under decking.
User Action: Frame a beam onto the cantilever end or remove it.

2 Errors Detected
0 Warnings Detected

You might also like