Professional Documents
Culture Documents
Calgonpump Catalogue (BSN Shah Alam)
Calgonpump Catalogue (BSN Shah Alam)
REF : 1 BLOCK 20th STOREY OFFICE BUILDING @ SECTION 14, SHAH ALAM FOR JAKEL PROPERTIES SDN BH (BSN) – ORIGINAL DESIGN
Complete System
ONE source
Easy-To-Operate Calgon Booster System
Calgon Variable Speed Booster Set is an advanced water supply pumping equipment which consists two or
more centrifugal pumps assembled in parallel and mounted on a common base frame. Calgon ready-to-
install system is designed to address the pressure needs of commercial and domestic water supply system.
The variable speed control function utilizing one or more frequency inverters to enable the pump system to
maintain a constant set pressure under varied water demand condition. The control system is equipped with
standard protective device on motor over-current and water shortage condition. Upon request, wireless
(GSM/GPRS) pump monitoring and reporting system can be incorporated to meet the specific requirement.
Water Supply
Water Supply
Pressure boosting system for high rise buildings, hotels,
condominiums, schools and other institutions.
Water supply system for waterworks and distribution system
for housing estate.
Irrigation
Irrigation for sport fields, golf courses and landscapes.
Irrigation
Industry
Water supply for all kind of industries.
Industry
Operating Conditions
Construction
• The Calgon variable speed system which consists of 2 or more centrifugal pump is built on a common
base frame.
• The control panel is fixed to the base frame with a mild steel support. For bigger kW motor, the control
panel can be supplied as separate entity.
• The control unit is fitted with frequency inverter(s), contactors, ventilation fan, pressure transmitter and
other necessary components as standard supply. Hydrologic pump controller is available upon
request.
• Suction and discharge manifold is mounted on both side of the pumps complete with isolating valves.
Non-return valve is installed on either the suction or discharge side of the pump subject to suction
condition.
• The manifold material and the type of valves used can be selected to suit client’s requirement.
Designation Quantity
Control Panel 1
Frequency Inverter 1 or more
Incoming
Diaphragm Tank
Outgoing
Energy Saving
Head (M) Head (M)
60 60
N1 = 100 %
50 50
N2 = 80% 75%
78%
81%
(1) 83%
40 40
(2)
(2) 83%
H2 81%
78%
30 Set Pressure (1) 75%
30
H1
20 20
10 ` 10
0 0
0 20 40 60 80 100 120 0 20 40 60 Q1 Q2 80 100 120
Flowrate % Flowrate %
1. Pump characteristic curve at full speed of 100%. 1. Pump duty point at fixed speed with operating efficiency
of 78%
2. Operating point of pump under reduced speed of
80% while maintaining constant set pressure. 2. By using enlarge impeller, same pump duty point is
achieved by reducing motor speed. Higher operating
Saving of power consumption is achieved by: efficiency is achieved.
3
Affinity Law P1 = N1 Affinity Law Q1 = N1
P2 N2 Q2 N2
2
Where P = power, N= motor speed H1 = N1
H2 N2
The Calgon range of CPC / CPS Submersible pumps are suitable for sewage and waste water applications.
Suitable for pumping of liquid containing solid of fibrous material. Widely adapted in the industrial, commercial
as well as the industrial sectors.
Type of Installation
Fixed Installation :Pumps are supplied with quick discharge coupling for ease of dismantling
for maintenance.
Portable Installation :Pumps are supplied with pump foot / base suitable for free standing installation.
Technical Data
Head (maximum) : 40 m
Capacity (up to) : 210 m3/Hr
Temperature (max) : 40oC
Type of pumped medium : Waste and sewage water containing solid or fibrous material.
Application
Materials of Constructions *
Type Designation
Control Box
Cables
Built in control box with integrated
Special indicator light available on end of
circuit ready to be connected to
cable. Red : Power on
float switch if required.
Yellow : Leakage
Motor
Squirrel Cage Submersible motors with Bearings
built in thermal sensors as option to cut off Sealed for life maintenance
pumps operation in event of over heating. free ball bearings..
1 ph / 240 V / 50 Hz
3 ph / 415 V/ 50 Hz
Mechanical Seal
Maintenance free,
specially design double mechanical
seal of tungsten carbide material
independent of direction of
rotation.
Oil Chamber
Specially designed with built
in sensor to detect
mechanical seal leakage.
Cutter
Cutter to enable handling of
solid or fibrous material.
Impeller
Open single
channel impeller
with built in
cutter provides
best handling of
solid and fibrous
material
DP Submersible Drainage pumps
The Calgon range of DP Submersible pumps are suitable for waste water drainage. Impellers are semi – open suitable
for clear and waste water containing solid particles. The motors are provided with a built in thermal sensor switch
to automatically cut off the motor in order to prevent overloading of motor. Double mechanical seals design protects
To prevent water from sipping into motor unit.
Technical Data
Head (maximum) : 32 m
Capacity (up to) : 40 m3/Hr
Temperature (max) : 40oC
Type of pumped medium : Waste water containing solid particles.
Application
Materials of Constructions *
Parts Standard Materials of Construction
Fasteners Stainless Steel SUS 304 * Special material variant upon request.
Type Designation
DP 6 - 20 - 0.75 (A)