Professional Documents
Culture Documents
Wps Dan PQR Form (API & Asme)
Wps Dan PQR Form (API & Asme)
1 2 3 4 5 6
Coupon Stenciled
Original Specimen Dimension
Origina Specimen Area
Maximum Load
Staincile Strength
Fracture Location
7
m can be use to report either a procedure qualification test or a welder
Reference : API Standard 1104, 5.2
Tested Welder
Approved Welding Supervisor
Adopted Chief Engineer
Drawing:
Nonmetallic Other 10
Sketches, Production Drawings, Weld Symbols or Written description should show 2
the general arrangement of the parts to be welded. Where applicable, the root
spacing and the details of weld groove may be specified.
(At The Option of the Mgfr., Sketches may be attached to illustrate joint design, weld 2,5
layers and bead sequence, e.g.,for notch toughness procedures, for multiple process
procedures, etc.)
TECHNIQUE (QW-410)
String or Weave Bead Stringer and weaving
Orifice or Gas Cup Size N/A
Initial and Interpass Cleaning ( Brushing, Grinding, etc.) grinding
Percent Composition
Flow rate
N/A
N/A
N/A
60o
10mm
2mm
2mm
PQR No.
Tensile Test ( QW-150 )
Impact Values
Specimen No. Notch Location Specimen Size Test Temperature Drop Weight Break (Y/N)
ft.lbs %Shear Mils
Macro - Results
Other Tests