Professional Documents
Culture Documents
ENGLISH
■■
bitrate that exceeds 25 Mbps.
Playback may not work for some types of discs, or when you use specific functions, such
3 Philippines, Indonesia,
Hong Kong
USB port. Connecting through a USB cable
may cause compatibility problems.
as angle change and aspect ratio adjustment. Information about the discs is written in DVD- ●● Inserting more than one memory device into
VIDEO Mexico, South America,
detail on the disc box. Please refer to this if necessary. a multi-card reader may cause the reader to
Central America, Australia,
■■ When you play a BD-J title, loading may take longer than a normal title or some functions
may perform slowly.
4 New Zealand, Pacific operate improperly.
The player does not support the PTP protocol.
Islands, Caribbean ●●
Disc types your player cannot play ●● Do not disconnect a USB device while it is
Russia, Eastern Europe,
transferring, playing, or recording files.
●● HD DVD ●● DVD-RAM ●● DVD-RW (VR mode) ●● 3.9 GB DVD-R for
5 India, most of Africa,
North Korea, Mongolia
●● The bigger the image resolution, the longer
Authoring.
the image takes to display.
●● DVD-ROM/PD/ ●● Super Audio CD ●● CVD/CD-ROM/CDV/
This player cannot play MP3 files with DRM
6
●●
MV, etc (except CD layer) CD-G/CD-I/LD China
(CD-Gs play audio (Digital Rights Management) downloaded
only, not graphics.) from commercial sites.
✎✎ NOTES
■■ Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
■■ "x.v.Color" offers a wider color range than normal DVD camcorder discs.
USB HOST
Accessories REMOTE CONTROL SENSOR
DISC TRAY
The following accessories are included with your Blu-ray player: ✎✎ NOTES
■■ When the player displays the Blu-ray disc menu of a commercially recorded movie
disc, you must select Play Movie or Start in the disc menu, and then press the v
button to play the movie.
■■ You can perform software upgrades using the USB Host jack with a USB flash
memory stick only.
BONUS REPEAT REPEAT FULL
Rear Panel
Batteries for Remote
User Manual Remote Control
Control (AAA Size)
(AK68-02401A) (AK59-00149A)
(4301-000115)
Turn the player on and off. Turn the TV on and off. Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
After setup, allows you to set the input product to the HDMI IN jack on your TV.
source on your TV.
TV volume adjustment.
-- Do not connect the power cord to the wall outlet until you have made all the other
Press to open and close the disc tray.
connections.
-- When you change the connections, turn off all devices before you start.
Press the number buttons to operate
options.
Use to enter the disc menu. Use to enter the popup menu/title menu.
Press to use the Tools menu. Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change
menu values.
You can connect the Blu-ray player to an audio system using one of the methods You can connect your player to your network router using one of the methods illustrated
illustrated below. below.
-- Do not connect the power cord to the wall outlet until you have made all the other To use the DLNA network functionality, you must connect your PC to your network as
connections. shown in the illustrations.
-- When you change the connections, turn off all devices before you start.
Wired Network
Method 1 Connecting to an HDMI supported AV receiver
●● Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your receiver.
●● Best quality (Recommended)
Broadband modem
(with integrated router)
Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder
Broadband
●● Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out service
Or
jack on the product to the Digital Coaxial In jack of the receiver.
●● Good quality
●● You will hear sound only through the front two speakers with Digital Output set to PCM.
Router
Broadband
service
Broadband
modem
Method 1 Method 2
Audio Audio
✎✎ NOTES
■■ Internet access to Samsung's software update server may not be allowed, depending on
the router you use or your ISP's policy. For more information, contact your ISP (Internet
Service Provider).
■■ DSL users, please use a router to make a network connection.
After you have connected the player to your setup is not completed yet. 1 the Home menu.
3. Press the v button. The TV Aspect
TV, turn on the TV and player. When you turn screen appears. ■■ When you return to the Home screen,
on the player the first time, the player's Initial the full screen mode is cancelled RETURN Button : Return to the
Settings screen appears on the TV. The Initial 4. On the TV Aspect screen, select the 2 previous menu.
automatically.
Setting procedure lets you set the On Screen desired TV Aspect Ratio, and then press ■■ If you want to display the Initial
Display (OSD) and menu languages, the the v button. The Network screen Setting screen again to make changes, v (Enter) / DIRECTION Button :
aspect ratio (screen size), the network type, appears. press the ■ button on the front panel Move the cursor or select an item.
and connect the player to your network. of the player for more than 5 seconds 3 Activate the currently selected
✎✎ NOTES with no disc inserted. This resets the item.
To run the Initial Settings procedure, follow ■■An explanation of each Aspect Ratio player to its default settings. Confirm a setting.
these steps :
appears on the screen. Highlight each ■■ After the initial settings process is
1. Plug in the Blu-ray player, turn on your choise to see each explanation. If you complete, you can operate the HDMI- EXIT Button : Press to exit the
have an HDTV, we suggest you choose 4 current menu.
TV, and then turn on the Blu-ray player CEC function.
by pressing the POWER button on the 16:9 original. ■■ If you want to use the
●● Home Menu
remote, The Initial Setting Language 5. If you have connected a LAN cable to Anynet+(HDMI-CEC) function to aid
screen appears. the Blu-ray player, the Blu-ray player in the initial set up process, please 5 1
Initial Settings I On-Screen Language
automatically verifies your wired network. follow the instructions below.
Play Disc Photos Videos Music
1) Connect the player to an
Select a language for the on-screen displays.
Initial Settings I Network - Wired
Anynet+(HDMI-CEC) compliant
Български Samsung TV using HDMI Cable. 6 2
Hrvatski Choose the method to configure Internet Protocol (IP). Please make
sure that the Ethernet cable is connected.
2) Set the Anynet+(HDMI-CEC) feature Empty disc tray
10
Bitstream
Bitstream Bitstream ✎✎ NOTES dynamic range of Dolby TrueHD audio,
Setup PCM
(Unprocessed)
(Re-encoded (Re-encoded ■■ Be sure to select the correct Digital based on information in the Dolby
DTS) Dolby D) TrueHD soundtrack.
Output or you will hear no sound or
HDMI HDMI HDMI Receiver or HDMI supported AV Also turns dynamic range control on for
Connection
Receiver
Coaxial
Receiver
Coaxial
Coaxial receiver or Coaxial
just loud noise.
If the HDMI device (AV receiver, TV) Dolby Digital and Dolby Digital Plus.
Up to Re-encoded Dolby ■■
PCM PCM 2ch PCM PCM 2ch Re-encoded DTS ●● Off : Leaves the dynamic range
7.1ch Digital * is not compatible with compressed
Dolby Re-encoded Dolby formats (Dolby Digital, DTS), the audio uncompressed, letting you hear the original
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Re-encoded DTS
Digital Digital * signal outputs as PCM. sound.
Dolby Digital Dolby Digital Dolby Re-encoded Dolby
PCM 2ch PCM 2ch Re-encoded DTS ■■ Regular DVDs do not have BONUSVIEW ●● On : Turns dynamic range control on for
Plus Plus Digital Digital *
Audio Dolby Dolby Re-encoded Dolby
audio and Navigation Sound Effects. all three Dolby formats. Quieter sounds
Dolby TrueHD PCM 2ch PCM 2ch Re-encoded DTS are made louder and the volume of loud
Stream on TrueHD Digital Digital * ■■ Some Blu-ray Discs do not have
Blu-ray Disc
DTS PCM 2ch PCM 2ch DTS DTS Re-encoded DTS
Re-encoded Dolby BONUSVIEW audio and Navigation sounds is reduced.
Digital * Sound Effects.
DTS-HD High DTS-HD High
Resolution PCM 2ch PCM 2ch Resolution DTS Re-encoded DTS
Re-encoded Dolby ■■ If you play MPEG audio soundtracks, Downmixing Mode
Audio Audio
Digital * the audio signal outputs as PCM
DTS-HD DTS-HD Re-encoded Dolby regardless of your Digital Output Lets you select the multi-channel downmix
PCM 2ch PCM 2ch DTS Re-encoded DTS selections (PCM or Bitstream). method that is compatible with your stereo
Master Audio Master Audio Digital *
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch ■■ If your TV is not compatible with system. You can choose to have the player
Audio
Stream on Dolby Digital PCM 2ch PCM 2ch Dolby Digital
Dolby
Dolby Digital Dolby Digital compressed multi-channel formats downmix to normal stereo or to surround
Digital (Dolby Digital, DTS), the player may compatible stereo.
DVD
DTS PCM 2ch PCM 2ch DTS DTS DTS DTS output PCM 2ch downmixed audio
Decodes main even though you selected Bitstream
Decodes main
Outputs only main feature audio
feature audio and (either Re-encoded or Unprocessed) in
Decodes main feature audio stream and BONUSVIEW
feature audio and so that your AV receiver audio stream
BONUSVIEW audio the setup menu.
stream together
Definition BONUSVIEW audio can decode the audio together into PCM ■■ If your TV is not compatible with PCM
into PCM audio and
for Blu-ray Any stream together into bitstream. audio and adds
adds Navigation
sampling rates over 48kHz, the player
Disc PCM audio and adds You will not hear Navigation Sound
Sound Effects, then may output 48kHz downsampled
Navigation Sound BONUSVIEW audio Effects, then re- PCM audio even though you set PCM
re-encodes the PCM
Effects. and Navigation Sound encodes the PCM Downsampling to Off.
audio into Dolby
Effects. audio into DTS
Digital bitstream
bitstream
11
setup. This is easiest and will work in the minutes. entry field (IP Address).
allowed for all BD-LIVE contents.
majority of cases. If it is static, you must 6. After the Network Function has 7. Use the number buttons on your ●● Allow (Valid Only) : The Internet
use the manual set up procedure. acquired the network values, press the remote to enter numbers. connection is allowed only for BD-LIVE
Network setup directions start below. RETURN button. 8. When done with each field, use the ▶ contents containing a valid certificate.
✎✎ NOTES 7. Select Network Test, and then press button to move to the next field. You ●● Prohibit : No Internet connection is
v to ensure the player has connected can also use the other arrow buttons allowed for any BD-LIVE content.
■■ This unit can only be connected to a
to your network. to move up, down, and back.
Network via a wired connection. ✎✎ NOTES
8. When the Network Test is complete, 9. Enter the IP Address, Subnet Mask,
■■ What is a valid certificate?
Wired Network Settings press the RETURN twice to return to and Gateway values in the same way.
When the player uses BD-LIVE to send
the Main Menu. 10. Press the ▼ button to go to DNS. the disc data and a request to the
1. In the Home menu, press the ▲▼◀▶ 9. If the Network Function does not server to certify the disc, the server uses
11. Press the ▼ button to go to the first
buttons to select Settings, and then acquire the network values, go to the the transmitted data to check if the disc
DNS entry field.
press the v button. directions for Manual Setup. is valid and sends the certificate back to
12. Enter the numbers as above.
2. Press the ▼▲ buttons to select the player.
Network, and then press the v Manual Network Setup 13. Press the RETURN button on your
■■ The Internet connection may be
button. remote control.
Before you start manual network setup, restricted while you are using BD-LIVE
3. Press the ▼▲ buttons to select Wired you need the network setting values. 14. Run a Network Test to ensure the contents.
Network Settings, and then press player has connected to your network.
To get the network setting values, contact
the v button. The Wired Network your ISP (Internet Service Provider) or your Using BD-LIVE™
Settings screen appears. Network Test
network administrator. Once the player is connected to the
Settings Use this menu item to check whether your network, you can enjoy various movie-
To enter the Network Settings into your network connection is working or not.
Display
Wired Network Settings related service contents using a BD-LIVE
Audio Internet Protocol Setup : Auto ▶ player, follow these steps:
IP Address : 0 0 0 0 compliant disc.
Network
System
Subnet Mask : 0 0 0 0
1. In the Home menu, press the ▼▲◀▶
Network Status
Language
Gateway : 0 0 0 0 1. Attach a USB memory stick to the USB
DNS
Security
: Auto buttons to select Settings, and then Use to check whether a connection to jack on the front of the player, and
DNS Server : 0 0 0 0
General press the v button. a network and the Internet has been then check its remaining memory. The
Support > Move " Select ' Return
2. Press the ▲▼ buttons to select established. memory device must have at least 1GB
Network, and then press the v of free space to accommodate the BD-
4. In the Internet Protocol Setup field, button. Device Name LIVE services.
select Auto if it is not selected. (Press 3. Press the ▼▲ buttons to select Wired 2. Insert a Blu-ray Disc that supports BD-
The Device Name function allows you to
v to select Auto, and then press v.) Network Settings, and then press LIVE.
change the player's name by selecting
the v button. The Wired Network 3. Select an item from various BD-LIVE
from a device name list box.
Settings screen appears. service contents provided by the disc
manufacturer.
12
13
14
15
16
6
selected track.
TRACK 003
02:38
TRACK 004
02:38 jack on the front of the product. Disc Copy to USB
TRACK 005 TRACK 006
02:38 02:38
2. In Stop mode, press the ▲▼◀▶
TRACK 007
02:38
TRACK 008
02:38
buttons to move to a desired track, and Lets you copy video/photo/music contents
Repeat an Audio CD (CD-DA)/ TRACK 009
02:38
TRACK 010
02:38 then press the YELLOW (C) button. A from a data disc to a USB/HDD device.
MP3 CD a Change Device c Select Tools ( ) Jump Page ' Return check appears on the track. 1. Open the disc tray. Place the data disc
Repeat this procedure to select on the tray, and close the tray. Insert
1. During Playlist playback, press the additional tracks. a USB device into the USB jack on the
2. Press the ▲▼◀▶ buttons to move
TOOLS button. front of the product. The new device
to a desired track, and then press the 3. To remove a track from the list, move
pop-up appears.
Playlist
YELLOW (C) button. A check appears to the track, and then press the
TRACK 001
Tools
TRACK 001
1/6
on the track. YELLOW (C) button again. 2. Press the ▲ button, and then press the
Repeat Mode ? Off 05:57
\
Repeat this procedure to select The check on the track is cancelled. ◀▶ buttons to select Blu-ray, DVD or
Rip TRACK 002
> Move < Adjust ' Return
04:27
additional tracks. CD.
TRACK 003
04:07 4. When done, press the TOOLS button
TRACK 004 3. To remove a track from the list, move and then select Rip using the ▲▼ 3. Use the ▲▼ buttons to select Photos,
Videos, or Music, and then press
03:41
+ 00:08 / 05:57
TRACK 005 to the track, and then press the buttons, and then press the v
the v button. The Photos, Videos
03:17
TRACK 006 YELLOW (C) button again. button. The Rip pop-up appears.
" Pause c Select
03:35
17
18
19
20
Forgot password ●● Press the ■ button (on the front panel) for more than 5 seconds
Troubleshooting with no disc inside. All settings including the password will revert
to the factory settings.
Don’t use this unless absolutely necessary.
Before requesting service, please try the following solutions.
●● When the factory default settings are restored, all stored user BD
data is deleted.
PROBLEM SOLUTION
The picture is noisy or ●● Make sure that the disc is not dirty or scratched.
No operation can be ●● Check the batteries in the remote control. They may need replacing.
distorted ●● Clean the disc.
performed with the ●● Operate the remote control at a distance of no more than 20 feet
remote control. from the player.
No HDMI output. ●● Check the connection between the TV and the HDMI jack of the
●● Remove batteries and hold down one or more buttons for several
player.
minutes to drain the microprocessor inside the remote control to reset
●● Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI
it. Reinstall the batteries and try to operate the remote control again.
input resolutions.
Disc does not play. ●● Ensure that the disc is installed with the label side facing up.
Abnormal HDMI output ●● If random noise appears on the screen, it means that TV does not
●● Check the region number of the Blu-ray Disc/DVD.
screen. support HDCP (High-bandwidth Digital Content Protection).
Disc Menu does not ●● Ensure that the disc has disc menus.
appear. If you experience other ●● Go to the contents and find the section of the user manual that
problems. contains the explanations regarding the current problem, and
follow the procedure once again.
The prohibition ●● This message appears when an invalid button is pressed.
message appears on
●● If the problem still cannot be solved, please contact your nearest
●● The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
the screen. Samsung authorized service center.
●● You’ve requested a title or chapter number or search time that is
out of range. DLNA function
Play mode differs from ●● Some of the functions selected in the Setup Menu may not work I can see folders shared ●● DLNAs shows only files corresponding to the Image, Music, and
the Setup Menu selection. properly if the disc is not encoded with the corresponding function. through DLNA, but I Movie categories. Files that do not correspond to these categories
cannot see the files. are not displayed.
The screen ratio cannot ●● The Screen Ratio is fixed on your Blu-ray Disc/DVD.
be changed. ●● This is not a problem with the player. Video is played ●● Check if the network is stable.
intermittently. ●● Check if the network cable is properly connected and if the
No audio. ●● Make sure you have selected the correct Digital Output in the network is overloaded.
Audio Options Menu.
DLNA connection ●● The IP address under the same subnetwork should be unique. If
The screen is blank. ●● If the HDMI output is set to a resolution your TV cannot support between Player and PC is they are not, IP interference can cause this phenomenon.
(for example, 1080p), you may not see a picture on your TV. unstable. ●● Check if you have a firewall enabled.
●● Press the ■ button (on front panel) for more than 5 seconds with If so, disable the firewall function.
no disc inside. All settings will revert to the factory settings.
●● When the factory default settings are restored, all stored user BD
data is deleted.
21
BD-LIVE
Power Requirements AC110-120V 50/60Hz
I cannot connect to the ●● Check whether the network connection is working or not
BD-LIVE server. by accessing Network Status in Network Settings (Settings Power Consumption 9.8W
> Network Settings > Network Status).
●● Check whether the USB memory device is connected to the player.
Weight 2.2 Ibs
●● The memory device must have at least 1GB of free space to General Dimensions 10.6 (W) X 7.6 (D) X 1.5 (H) inches
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. Operating Temperature
Check whether the BD-LIVE Internet Connection menu is set to +41°F to +95°F
●●
Range
Allow(All).
●● If all above fails, contact the contents provider or update the Operating Humidity Range 10 % to 75 %
player to the latest firmware.
Type A USB 2.0
When using the BD-LIVE ●● The memory device must have at least 1GB of free space to USB
service, an error occurs. accommodate the BD-LIVE service. DC output 5V 0.5A Max.
You can check the available size in BD Data Management.
Video 1080p, 1080i, 720p, 480p
HDMI
✎✎ NOTES Audio PCM, Bitstream
■■ When the factory default settings are restored, all stored user BD data is deleted.
Audio
Digital Audio Output Coaxial
Output
Repairs
Network Ethernet 100BASE - TX Terminal
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the -- Network speeds equal to or below 10Mbps are not supported.
product. -- Design and specifications are subject to change without prior notice.
2. You bring the unit to a repair center and there is no defect in the product. -- Weight and dimensions are approximate.
-- Dispose unwanted electronics through an approved recycler.
We will provide you with the amount of the administration fee before we make a home To find the nearest recycling location, go to our website: www.samsung.com/
visit or begin any work on your player. recyclingdirect or call, (877) 278 - 0799
We recommend you read this manually thoroughly, search for a solution on line at
www.samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-
7864) before seeking to repair your player.
22
this player. Some of the discs listed above may not play due to one or more reasons Copy Protection
provided below. ●● Because AACS (Advanced Access Content System) is approved as the content
●● Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-
protection system for the Blu-ray Disc format, similar to use of CSS (Content Scramble
RE/-R, System) for the DVD format, certain restrictions are imposed on playback, analog
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not signal output, etc., of AACS protected contents.
respond to all operating commands or operate all features of every disc. These and The operation of this product and restrictions on this product may vary depending
other disc compatibility and player operation issues with new and existing format on your time of purchase as those restrictions may be adopted and/or changed by
discs are possible because: AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are
-- Blu-ray is a new and evolving format and this player may not operate all features of additionally used as content protection systems for the Blu-ray Disc format, which
Blu-ray Discs because some features may be optional, additional features that may imposes certain restrictions including playback restrictions for BD-ROM Mark and/or
have been added to the Blu-ray Disc format after the production of this player, and BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark,
certain available features may be subject to delayed availability; BD+, or this product, please contact SAMSUNG customer care center.
-- not all new and existing disc format versions are supported by this player; ●● Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you
-- new and existing disc formats may be revised, changed, updated, improved and/or should only connect your Player directly to your TV, not to a VCR. Connecting to a
supplemented; VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs.
-- some discs are produced in a manner that allows specific or limited operation or ●● Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized
restricts features during playback; recording, use, display, distribution, or revision of television programs, videotapes,
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal
and CD-RW/-R logos may still be non-standardized discs; liability.
-- some discs may not be played depending on their physical state or recording ●● Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized
conditions; copies of some commercially-produced film and videos and their soundtracks.
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software When a prohibited use of an unauthorized copy is detected, a message will be
and/or the manufacture of discs; displayed and playback or copying will be interrupted. More information about
Cinavia technology is provided at the Cinavia Online Consumer Information Center
-- this player operates differently than a standard DVD player or other AV equipment;
at http://www.cinavia.com. To request additional information about Cinavia by mail,
and/or
send a postcard with your mailing address to: Cinavia Consumer Information Center,
-- for reasons noted throughout this user manual and for other reason(s) discovered P.O. Box 86851, San Diego CA, 92138, USA.
and posted by SAMSUNG customer care center. This product incorporates proprietary technology under licence from Verance
●● If you encounter disc compatibility or player operation problems, please contact
Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide
SAMSUNG customer care center. patents issued and pending as well as copyright and trade secret protection for certain
You may also contact SAMSUNG customer care center for possible updates on this player. aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright
●● For additional information on playback restrictions and disc compatibility, refer to the 2004-2013 Verance Corporation. All rights reserved by Verance. Reverse engineering
Precautions, Before Reading the user manual, Disc Types and Characteristics, and or disassembly is prohibited.
Before Playing sections of this user manual.
23
24
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must
contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of
sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the
responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the
limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products
assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-
SAMSUNG hardware and software products, if provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement,
noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses
for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature;
use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by
SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and
distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG
SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE
PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE
OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD
BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact the SAMSUNG customer care center.
AK68-02401A-00
AK68-02401A-00