You are on page 1of 24

CLASSIFICATION OF

ENGINEERING
SERVICES

By:
Group 1
Cayanan,Jonas
Damian, Guillen
Serdoncillo, RJ Claude
Salandanan, Joanna
THE TYPES OF INFRASTRUCTURE UNDER THE DOMAIN OF
CIVIL ENGINEERING PURSUANT TO RA 544, AS AMENDED,
INCLUDE:
1. Streets, bridges, highways and
railroads
2. Airports and Hangers
3. Port works, canals, river and
shore improvements, and dry
docks
4. Buildings
5. Fixed structures for irrigation,
flood protection, drainage
supply, and sewerage works
6. Tunnels
CATEGORIES OF ENGINEERING SERVICES
 Consultation, Research, Investigation,
and Report
 Design Services
 Construction Services
 Special Services
 Engineering Support Services
 Academic Services
CONSULTATION,
RESEARCH,
INVESTIGATION,
AND REPORT
PRELIMINARY AND FEASIBILITY
INVESTIGATION AND REPORTS
 Authorization of a capital project
 Operating cost
 Life-cycle cost
 Financing consideration
 Expected revenues
 Extensive investigations and analyses
of conditions
 Impact on the environment
 Sustainable development
 Comparison of possible plans
PLANNING STUDIES
 Itincludes the broad areas of
developing the engineering
requirements of master plans for
long range capital improvement
programs

 Preparationof preliminary
engineering of land development
APPRAISAL, VALUATIONS, AND RATE
STUDIES
 Theseservices may include investigations and
analyses of:
 CapitalCost
 Operating Cost
 Overheard Cost
 Costs of financing
 Revenues needed
ASSISTANCE IN FINANCIAL
MATTERS
The civil engineer may be
engaged by Client who is
planning to issue bonds,
particularly revenue bonds, to
finance capital project.
DIRECT PERSONAL SERVICES
 Assistance in
preparation for legal
proceedings.
 Appearance before
courts and
commissions.
 Investigation of
technical matters.
RESEARCH AND DEVELOPMENT
 Research is specialized investigation
and gathering data.
 Development of new construction
materials.
CONSTRUCTION
SERVICES
CONSTRUCTION SERVICES
A registered Civil Engineer may engage in construction
contracting after being licensed as a contractor by the
Contractors Accreditation Board.
 A registered Civil Engineer may provide the services of
a supporting technical employee as required of a
construction company.
 A Civil Engineer may be employed as a construction
engineer, resident Civil Engineer, project engineer,
quality control engineer, cost engineer or engineer
inspector in a project.
 Only registered Civil Engineers can take charge of any
structure mentioned in Section 2, RA 544.
 An employed Civil Engineer must comply with the code
DESIGN
SERVICES
STANDARD PHASES OF A CONSTRUCTION
PROJECT
1. Study and Report Phase
2. Preliminary Design Phase
3. Final Design Phase
4. Bidding or Negotiating Phase
5. Construction Phase
6. Operation Phase
1
STUDY AND REPORT
PHASE
 Reviewing of available
2
PRELIMINARY DESIGN
PHASE
 Consulting and advising
data of the client.
 Identifying and  Preparing preliminary

analyzing of design documents.


governmental  Present the project to the
jurisdiction public.
 Providing the analyses  Providing periodic status
of the client needs reports.
 Economic analysis
 Project concepts
 Project alternatives
3
FINAL DESIGN PHASE
 Preparation of
construction drawings
and specifications.
4 BIDDING OR NEGOTIATING
PHASE
 Assisting of the client in
advertising or obtaining
 Preparation of right-of- bids.
way and easement  Assisting of the client in
documents.
 Furnishing the necessary
choosing the
engineering data. contractors.
 Preparation of the  Preparing a review of all
construction documents the bidders.
for the review of the
client.
5
CONSTRUCTION PHASE
 Reviewing
reports.
of test 6 OPERATION PHASE
 Assisting the client
in the startup and
 Visiting the project operation of the
site. project, including
 Providing a full-time periodic inspection.
resident project
representative.
 Making
recommendations and
sketches to resolve
problems.
 Making a final
SPECIAL
SERVICES
SPECIAL SERVICES
 Geotechnical Engineering
 Special studies, tests and process
determinations.
 Engineering surveys.
 Inspection of materials
 Providing additional copies of reports.
 Valuing Engineering
 Redesign
SPECIAL SERVICES
 Client’s expert witness in litigation in connection
with the project.
 Final investigations
 Preparation of environmental assessment.
 Assisting the client in choosing the workers.
 Assessment of completed project’s ability to
meet its design intent.
ENGINEERING
SUPPORT
SERVICES
ENGINEERING SUPPORT
SERVICES
 This involves engineering support
services in general civil engineering
practice.

 It may involve:
 Drafting
 Land and Construction Surveying
 Data gathering activities
ACADEMIC
SERVICES
ACADEMIC SERVICES
 Involves full or part time teaching or training of
prospective professionals.
 Upgrading of knowledge and skill of fellow
professionals.
 Conduction of tutorial and refreshers
 Writing technical articles
 Serving as a resource speaker

You might also like