Professional Documents
Culture Documents
2.3 Extra for providing and mixing water proofing material in 27.00 per 48.15
cement concrete work in doses by weight of cement as 50kg
per manufacturer's specification. cemen
t
2.4 Applying a coat of residual petroleum bitumen of grade 103.23 sqm 132.00
of VG-10 of of approved quality using 1.7kg per square
metre on damp proof course after cleaning the surface
with brushes and finally with a piece of cloth lightly
soaked in kerosene oil.
2.5 Making plinth protection 50 mm thick of cement 143.59 sqm 419.30
concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) over 75mm thick
bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand,
including finishing the top smooth.
5.4.1 18 mm thick Italian Marble stone slab,Perlato, Rosso 81.62 Sqm 7022.60
verona, Fire Red or Dark Emperadore etc.
5.5 Providing and laying flamed finish Granite stone flooring
in required design complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm
(average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and
pointing with white cement slurry admixed with pigment
of matching shade including rubbing, curing and
polishing etc. all complete as specified and as directed
by the Engineer- in-Charge :
5.5.1 Flamed finish granite stone slab Jet Black, Cherry Red, 474.42 sqm 3244.35
Elite Brown, Cat Eye or equivalent.
Sub Head - 6 : WOOD & PVC WORK
6.1 Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash
fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately).
6.2.1 35 mm thick including ISI marked Stainless Steel butt 100.80 sqm 2606.45
hinges with necessary screws.
6.2.2 25 mm thick (for cupboard) including ISI marked nickel 21.00 sqm 2109.35
plated bright finished M.S. Piano hinges IS : 3818
marked with necessary screws.
6.3 Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st class
hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face
veneers on both faces of shutters :
6.3.1 35 mm thick including ISI marked Stainless Steel butt 31.19 sqm 1909.55
hinges with necessary screws.
6.4 Providing and fixing curtain rods of 1.25 mm thick
chromium plated brass plate, with two chromium plated
brass brackets fixed with C.P. brass screws and wooden
plugs, etc., wherever necessary complete
7.1 Structural steel work in single section, fixed with or 500.00 Kg 67.70
without connecting plate, including cutting, hoisting,
fixing in position and applying a priming coat of
approved steel primer all complete.
7.2 Providing and fixing factory made ISI marked steel
glazed doors, windows and ventilators, side /top /centre
hung, with beading and all members such as F7D, F4B,
K11 B and K12 B etc. complete of standard rolled steel
sections, joints mitred and flash butt welded and sash
bars tenoned and riveted, including providing and fixing
of hinges, pivots, including priming coat of approved
steel primer, but excluding the cost of other fittings,
complete all as per approved design, (sectional weight
of only steel members shall be measured for payment).
7.4.1 Profile C
7.4.1.1 Fixing with adjustable lugs with split end tail to each 86.25 mtr 400.95
jamb
7.5 Providing and fixing stainless steel ( Grade 304) railing 456.00 kg 619.40
made of Hollow tubes, channels, plates etc. including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete i/c
fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge. ( for payment purpose only weight
of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts,
fasteners etc.)
7.6 Providing & fixing glass panes with putty and glazing
clips in steel doors, windows, clerestory windows, all
complete with :
7.6.1 5.5 mm thick glass panes 139.05 Sqm 988.00
Sub Head - 8 : FLOORING
8.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate) finished with a
floating coat of neat cement including cement slurry, but
excluding the cost of nosing of steps etc. complete.
8.1.1 40mm thick with 20mm nominal size stone aggregate. 22.77 sqm 353.35
8.2 52 mm thick cement concrete flooring with concrete 425.38 sqm 535.25
hardener topping, under layer 40 mm thick cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) and top layer 12
mm thick cement hardener consisting of mix 1:2 (1
cement hardener mix : 2 graded stone aggregate 6 mm
nominal size) by volume, .hardening compound mixed
@ 2 litre per 50kg of cement or as per manufacturers
specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.
8.7 38 mm thick wood block flooring of first class teak wood 28.77 sqm 7067.05
laid over 25 mm thick leveling layer of cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 10 mm nominal size) to be paid separately,
coated with a thin layer of hot bitumen penetration
80/25 (blown type) @ 2.45 kg per sqm, including fixing
blocks in position after dipping in hot bitumen (blown
type) up to half depth, planed, levelled smooth and
finished complete.
8.8 Providing and fixing Ist quality ceramic glazed wall tiles 292.98 sqm 836.65
conforming to IS : 15622 (thickness to be specified by
the manufacturer ) of approved make in all colours,
shades except burgundy, bottle green, black of any size
as approved by Engineer-in-Charge, in skirting, risers of
steps and dados over 12 mm thick bed of cement
Mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm including pointing
in white cement mixed with pigment of matching shade
complete.
8.9 Providing and laying Ceramic glazed floor tiles 300x300 134.01 sqm 904.45
mm (thickness to be specified by the manufacturer) of
1st quality conforming to IS : 15622 of approved make
in all colours, shades, except White, Ivory, Grey, Fume
Red Brown laid on 20mm thick bed of Cement Mortar
1:4 (1 Cement : 4 Coarse sand) including pointing the
joints with white cement and matching pigments etc.,
complete.
12.1.1 White Vitreous china Orissa pattern W.C. pan of size 7.00 each 3392.80
580x440mm with integral type foot rests.
12.2 Providing and fixing white vitreous china pedestal type
water closet (European type W.C. pan) with seat and lid,
10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle
lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good
the walls and floors wherever required :
12.2.1 W.C. pan with ISI marked white solid plastic seat and lid 12.00 each 3317.30
12.3 Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps, 32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
require:
12.3.1 White Vitreous China Wash basin size 630x450 mm 24.00 each 2331.15
with a pair of 15 mm C.P. brass pillar taps.
12.4 Providing and fixing white vitreous china pedestal for 24.00 each 979.95
wash basin completely recessed at the back for the
reception of pipes and fittings.
12.5 Providing and fixing Stainless Steel A ISI 304 (18/8)
kitchen sink as per IS 13983 with C.I. brackets and
stainless steel plug 40 mm including painting of fittings
and brackets, cutting and making good the walls
wherever required :
12.5.1 Kitchen sink with drain board
12.5.1.1 510x1040 mm bowl depth 250mm. 1.00 each 7052.15
12.6 Providing and fixing P.V.C. waste pipe for sink or wash
basin including P.V.C. waste fittings complete.
12.6.1 Semi rigid pipe
12.6.1.1 32 mm dia 24.00 each 76.75
12.7 Providing and fixing 600x450 mm beveled edge mirror 18.00 each 793.95
of superior glass (of approved quality) complete with 6
mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
12.8 Providing and fixing 600x120x5 mm glass shelf with 18.00 each 543.80
edges round off, supported on anodised aluminium
angle frame with C.P. brass brackets and guard rail
complete fixed with 40 mm long screws, rawl plugs etc.,
complete.
12.9 Providing and fixing soil, waste and vent pipes :
12.9.1 100 mm dia
12.9.1.1 Centrifugally cast (spun) iron socket & spigot (S&S) pipe 98.00 metre 917.75
as per IS: 3989
12.9.2 75 mm diameter :
12.9.2.1 Centrifugally cast (spun) iron socketed pipe as per IS: 45.00 metre 791.30
3989
12.10 Providing and fixing M.S. holder-bat clamps of approved
design to Sand Cast iron/cast iron (spun) pipe
embedded in and including cement concrete blocks
10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including
cost of cutting holes and making good the walls etc.
13.6.1 With common burnt clay F.P.S.(non modular) bricks of 3.00 each 1157.75
class designation 7.5.
13.7 Painting G.I. pipes and fittings with synthetic enamel
white paint with two coats over a ready mixed priming
coat, both of approved quality for new work :
13.15.1 25 mm nominal bore, 152mm long. Weighing not less 6.00 each 554.50
than 440 gms.
13.16 Providing and fixing PTMT swivelling shower, 15mm 7.00 each 141.75
nominal bore. Weighing not less than 40gms.
13.17 Providing and fixing PTMT soap Dish Holder having 7.00 each 164.95
length of 138mm, breadth 102mm, height of 75mm with
concealed fitting arrangements. Weighing not less than
106 gms.
Sub Head - 14 : DRAINAGE
14.1 Providing, laying and jointing glazed stoneware pipes
class SP-1 with stiff mixture of cement mortar in the
proportion of 1:1 (1 cement : 1 fine sand) including
testing of joints etc. complete :
14.1.1 100 mm diameter 100.00 mtr 314.35
14.2 Providing and laying cement concrete 1:5:10 (1
cement : 5 coarse sand : 10 graded stone aggregate 40
mm nominal size) all-round S.W. pipes including bed
concrete as per standard design:
14.2.1 100 mm diameter S.W. pipe 100.00 mtr 724.70
14.3 Constructing brick masonry manhole in cement mortar
1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab
with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40mm nominal size), inside plastering
12mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate
20mm nominal size) finished with a floating coat of neat
cement complete as per standard design :
15.2.1 With float glass panes of 4.0 mm thickness 246.72 sqm 828.75
15.3 Providing and fixing double action hydraulic floor spring
of approved brand and manufacture conforming to IS :
6315, having brand logo embossed on the body / plate
with double spring mechanism and door weight upto
125 kg, for doors, including cost of cutting floors,
embedding in floors as required and making good the
same matching to the existing floor finishing and cover
plates with brass pivot and single piece M.S. sheet
outer box with slide plate etc. complete as per the
direction of Engineer-in-charge.
15.3.1 With stainless steel cover plate minimum 1.25 mm 8.00 Each 2039.00
thickness
Sub Head - 16 : WATER PROOFING
16.1 Providing and laying water proofing treatment in sunken 178.09 sqm 283.10
portion of WCs, bathroom etc., by applying cement
slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement
@ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/sqm. This layer will be allowed
to air cure for 4 hours. b) Second layer of slurry of
cement @ 0.242 kg/sqm mixed with water proofing
cement compound @ 0.126 kg/sqm. This layer will be
allowed to air cure for 4 hours followed with water curing
for 48 hours. The rate includes preparation of surface,
treatment and sealing of all joints, corners, junctions of
pipes and masonry with polymer mixed slurry.
248,960.00
1,575.00
12,755.00
81,237.00
179,840.00
18,500.00
233,233.00
531,673.00
250,350.00
752,019.00
26,611.00
1,300.00
13,626.00
60,207.00
118,890.00
669,741.00
16,719.00
894,065.00
924,834.00
35,020.00
73,502.00
3,342,862.00
7,294,694.00
10,787.00
27
2,377,404.00
5,367,002.00
1,848,202.00
33,586.00
555,425.00
1,478,347.00
89,691.00
183,745.00
51,067.00
19,581.00
573,206.00
1,539,188.00
282,891.00
262,730.00
44,296.00
59,549.00
100,453.00
502,420.00
8,314.00
2,825.00
7,452.00
5,710.00
1,138.00
983.00
14,448.00
9,257.00
5,474.00
2,353.00
2,513.00
10,914.00
7,378.00
15,590.00
33,850.00
29,793.00
19,586.00
34,582.00
282,446.00
137,381.00
8,046.00
227,685.00
2,364.00
17,518.00
192,223.00
26,160.00
203,332.00
245,124.00
121,202.00
768,682.00
95,472.00
5,828.00
57,913.00
453.00
4,031.00
671.00
7,378.00
242,781.00
297,841.00
554,264.00
262,881.00
240,331.00
9,050.00
330,958.00
56,317.00
639,557.00
274,901.00
17,096.00
10,482.00
7,354.00
40,569.00
79,124.00
61,220.00
61,484.00
25,658.00
13,213.00
53,025.00
678,141.00
9,635.00
7,476.00
23,750.00
39,808.00
55,948.00
23,519.00
7,052.00
1,842.00
14,291.00
9,788.00
89,940.00
35,609.00
7,339.00
3,464.00
7,714.00
3,358.00
7,629.00
6,238.00
2,607.00
2,225.00
24,375.00
8,212.00
30,459.00
1,933.00
1,180.00
5,492.00
12,996.00
94,190.00
16,424.00
29,172.00
27,545.00
24,037.00
31,853.00
2,283.00
5,762.00
3,473.00
807.00
1,505.00
1,013.00
6,055.00
43,500.00
9,650.00
4,275.00
4,338.00
7,108.00
3,327.00
992.00
1,155.00
31,435.00
72,470.00
212,675.00
28,191.00
12,103.00
1,635,658.00
1,233,173.00
204,469.00
16,312.00
50,418.00
620,537.00
750,239.00
322,075.00
61,245.00
43,747,442.00 -
4,574,861.00
48,322,303.00
-9,616,138.30
38,706,164.70
RECORD ENTRY ( C.P.W.A. - 23) Page 33
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Agreement No. :- 03/EE/SE/GCD/2017-18.
Agency :- M/s. Tana Hali Construction & Co.
Serial No. of this Bill :- 8th R/A Bill
Date of Start (As per Agreement) :- 02 / 06 / 2017
Date of Completion:- In progress
Date of Measurment: -12/07/2019
3.2 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete u
level.
3.2.1 Thermo-Mechanically Treated bars.
NOT FOR PAYMENT
Manhole slab reinforcement
Ø, Diameter of TMT bars 8Ø 10 Ø 12 Ø 16 Ø
Admin block manhole
start from back side
Bottom main
12 Ø Main 21 X 1 X 4 X 1.30 109.20
12 Ø Main 21 X 1 X 4 X 1.20 100.80
Binder
12 Ø 21 X 1 X 4 X 0.63 52.50
12 Ø 21 X 1 X 4 X 0.58 48.72
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 34
Date of Measurment: -26/08/2019
3.2 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete u
level.
3.2.1 Thermo-Mechanically Treated bars.
Ø, Diameter of TMT bars 8Ø 10 Ø 12 Ø 16 Ø
Admin building
DIG Room wash basin shelf
12 Ø main 1 X 15 X 0.63 9.45
12 Ø main 1X 5 X 2.15 10.75
Pantry room wash basin shelf
12 Ø main 1 X 10 X 0.63 6.30
12 Ø main 1X 5 X 1.38 6.90
12 Ø main 1X 11 X 0.63 6.93
12 Ø main 1X 5 X 1.63 8.15
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 35
Ø, Diameter of TMT bars 8Ø 10 Ø 12 Ø 16 Ø
Bottom main
12 Ø Main 1 X 34 X 1.80 61.20
Binder
8Ø 2 X 4 X 4.85 38.80
8Ø 2 X 6 X 4.85 58.20
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 36
Ø, Diameter of TMT bars 8Ø 10 Ø 12 Ø 16 Ø
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 37
20 Ø 25 Ø
0.00 0.00
2.470 3.850
0.00 0.00
276.36 Kg
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 38
20 Ø 25 Ø
0.00 0.00
2.470 3.85
0.00 0.00
43.05
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 39
20 Ø 25 Ø
20 Ø 25 Ø
0.00 0.00
2.470 3.850
0.00 0.00
92.66 Kg
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
RECORD ENTRY ( C.P.W.A. - 23) Page 40
20 Ø 25 Ø
20 Ø 25 Ø
0.00 0.00
2.470 3.850
0.00 0.00
312.37 Kg
Measured byM/S Tana Hali Construction Co. JE/SCSD-V Checked byAssitant Engineer
Page 5
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Agreement No. :- 03/EE/SE/GCD/2017-18.
Agency :- M/s. Tana Hali Construction & Co.
Serial No. of this Bill :- 9th R/A Bill
Date of Start (As per Agreement) :- 02 / 06 / 2017
Date of Completion:- In progress
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unser
Item No. II/3 material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposa
Item No. II/2 unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (A) In cement mortar
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed p
13.2 painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including joint
E.I. No. III/13 ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
(i) 50 mm diameter
Basin line /DIG toilet 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 m
12.14 and nuts complete.
12.14.1 100x100x100 mm
12.14.1.1 Sand cast iron S&S as per IS - 3989
Basin 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
12.16 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter :
12.16.1 100 mm
Basin 1 x 1 x 1 x 3 x
EWC 1 x 1 x 1 x 2 x
Total Quantity
C/o to Page No.
13.3 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
13.3.1 80 mm dia. nominal bore
External G.I Pipe main line to Building
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I. No. III/19 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
13.8 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
13.8.1 80 mm diameter pipe
External G.I Pipe main line to Building
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/20 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
(a) 50 mm diameter pipe
L.H.S Inlet 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
R.H.S Inlet 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
13.9
13.9.1 80 mm diameter pipe
External G.I Pipe main line to Building
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
E.I No.III/21 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutter
2.1 to plinth level :
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
2.1.2
For Drain -straight 1 x 1 x 30.000 x 0.875 x
1 x 1 x 26.050 x 0.875 x
Circular drain
Right to culvrt junction 1 x 1 x 30.000 x 0.875 x
1 x 1 x 30.000 x 0.875 x
1 x 1 x 27.000 x 0.875 x
3.1 Centering and shuttering including strutting, propping etc. and removal of form for :
Circular drain
Right to culvrt junction 1 x 2 x 30.000 x
1 x 2 x 30.000 x
1 x 2 x 27.000 x
Total Quantity
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete f
cement concrete work, using cement content as per approved design mix, including pumping of concrete to site
excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended
3.5 per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durabil
direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less c
per design mix is payable/recoverable separately).
3.1 Centering and shuttering including strutting, propping etc. and removal of form for :
3.1.3 Shelves (Cast in situ)
DIG Room wash basin shelf 1 x 1 x 1 x 2.150 x
Side 1 x 1 x 1 x 2.150 x
Pantry wash basin shelf 1 x 1 x 1 x 1.380 x
1 x 1 x 1 x 1.000 x
Side 1 x 1 x 1 x 0.770 x
Side 1 x 1 x 1 x 1.000 x
1 x 1 x 1 x 0.630 x
Total Quantity
C/o to Page No.
Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super s
Item No. III/3 plinth and upto floorV level.
10.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
10.2.1 1:6 (1 cement: 6 fine sand)
DIG Room wash basin bottom 1 x 1 x 1 x 1.880 x
Pantry wash basin bottom 1 x 1 x 1 x 1.380 x
1 x 1 x 1 x 1.000 x
Partion wall between DIG toilet & pantry
1 x 1 x 2 x 0.560 x
Total Quantity
C/o to Page No.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutter
2.1 to plinth level :
2.1.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Fire shaft floor 1 x 3 x 1.230 x 0.920 x
1 x 3 x 1.300 x 1.230 x
E.I No.III/22 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work – Exposed on wall.
(a) 50 mm dia. nominal bore
Male ,Female & DIG toilet outlet
Tank inter connection 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Vent 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/22 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work – Exposed on wall.
(b) 40 mm dia. nominal bore
Outlet
Ladies toilet
2nd & 3rd floor
Tank 1 x 1 x 1 x 1 x
Vent 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Gents toilet
2nd & 3rd floor
Tank 1 x 1 x 1 x 1 x
Vent 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
R.H.S tank over flow 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Wash out wall 1 x 1 x 1 x 2 x
Vertical 1 x 1 x 1 x 2 x
Spout at tank roof 1 x 1 x 1 x 2 x
Down slab 1 x 1 x 1 x 14 x
L.H.S tank over flow vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Inlet
PVC tank vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
Concrete tank vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Total Quantity
C/o to Page No.
13.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work – Exposed on wall.
13.1.2 32 mm dia. nominal bore
Outlet
R.H.S ladies toilet
2nd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
3rd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
R.H.S gents toilet
2nd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
3rd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
L.H.S Ladies toilet
1st floor
Vertical 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
2nd floor
Vertical 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
3rd floor
Vertical 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
common and attached toilet
1st & 2nd floor
tank 1 x 1 x 1 x 1 x
vent 1 x 1 x 1 x 1 x
vertical 1 x 1 x 1 x 1 x
horizontal 1 x 1 x 1 x 1 x
vertical 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
13.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work – Exposed on wall.
13.1.1 25 mm dia. nominal bore
Outlet
Gents toilet
1st floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
2nd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
3rd floor
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 1 x
common and attached toilet
2nd floor
Horizontal 1 x 1 x 1 x 1 x
vertical 1 x 1 x 1 x 1 x
1st floor
Horizontal 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/22 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Total Quantity
C/o to Page No.
E.I No.III/22 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work – Exposed on wall.
(d) 15 mm dia. nominal bore
Outlet
kitchen side
Vertical 1 x 1 x 1 x 1 x
Horizontal 1 x 1 x 1 x 1 x
wall 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
13.5 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
13.5.1 80 mm nominal bore
External G.I Pipe main line to Building
wash out 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/23 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
E.I No.III/23 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
(b) 40 mm nominal bore
R.H.S ladies 1 x 1 x 1 x 1 x
R.H.S gents 1 x 1 x 1 x 1 x
Wash out 1 x 1 x 1 x 1 x
L.H.S & R.H.S inlet 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/23 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
(c) 32 mm nominal bore
L.H.S ladies
1st,2nd,3rd Floor 1 x 1 x 1 x 3 x
Common and attached toilet 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
E.I No.III/23 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
(d) 25 mm nominal bore
Gents toilet outlet
1st,2nd,3rd floor 1 x 1 x 1 x 3 x
Total Quantity
C/o to Page No.
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, includ
13.4 threading the pipe etc. complete :
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc
E.I No.III/24 work)
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc
E.I No.III/24 work)
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc
E.I No.III/24 work)
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc
E.I No.III/24 work)
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc
E.I No.III/24 work)
5.5 Providing and laying flamed finish Granite stone flooring in required design complete as per the architectural drawings w
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing wi
matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer- in
5.5.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Admin building Granite work
1st floor corridor
Start from R.H.S 1 x 1 x 1 x 12.050 x
Door sill 1 x 1 x 2 x 0.850 x
1 x 1 x 1 x 0.870 x
1 x 1 x 1 x 3.850 x
1 x 1 x( 0.314 x 3.800 x
2
1 x 2 x 0.5 x 0.750 x
Door sill 1 x 1 x 1 x 0.850 x
1 x 1 x 1 x 1.100 x
1 x 1 x 1.95 x( 8.400 x
2
Door sill 1 x 1 x 2 x 0.850 x
1 x 1 x 2.000 x( 1.700 x
2
1 x 1 x 2.080 x( 6.350 x
2
1 x 1 x 1 x 2.400 x
1 x 1 x 0.50 x 1.830 x
1 x 1 x 1 x 3.100 x
1 x 1 x 2.100 x( 10.420 x
2
1 x 1 x 0.5 x 2.300 x
1 x 1 x 0.500 x( 7.680 x
2
Door sill 1 x 1 x 1 x 0.780 x
1 x 1 x 1 x 0.890 x
1 x 1 x 3 x 0.850 x
2nd floor
Corridor 1 x 1 x 1 x 12.050 x
Door sill 1 x 1 x 3 x 0.850 x
1 x 1 x 2 x 0.850 x
Aquagurd 1 x 1 x 1 x 0.900 x
Door sill 1 x 1 x 1 x 0.850 x
1 x 1 x 1 x 5.700 x
Less -1 x 1 x 2 x 0.650 x
Door sill 1 x 1 x 1 x 1.070 x
1 x 1 x 1.970 x( 0.900 +
2
Door sill 1 x 1 x 1 x 1.360 x
Door sill 1 x 1 x 1 x 0.770 x
1 x 1 x 1 x 4.050 x
Door sill 1 x 1 x 1 x 0.770 x
Door sill 1 x 1 x 2 x 0.750 x
1 x 1 x 1 x 0.860 x
1 x 1 x 1.650 x( 2.140 +
2
1 x 1 x 2.080 x( 6.350 +
2
1 x 1 x 1 x 2.410 x
1 x 1 x 0.5 x 1.830 x
1 x 1 x 1 x 0.300 x
1 x 1 x 2.100 x( 10.400 +
2
1 x 1 x 0.5 x 2.300 x
1 x 1 x 1.950 x( 7.600 +
2
Door sill 1 x 1 x 2 x 0.850 x
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen
counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over
5.1 cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment,
including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
1 x 1 x 1 x 1.000 x
Skirting 1 x 1 x 1 x 1.000 x
Skirting 1 x 1 x 1 x 0.770 x
1st floor kitchen 1 x 1 x 1 x 1.780 x
Skirting 1 x 1 x 1 x 1.780 x
Total Quantity
C/o to Page No.
Providing and fixing flamed finish Granite stone for wall lining (veneer work) including dado, skirting, risers of steps
design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mo
Extra Item : 3 oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry adm
No.III/18 of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed b
Charge.
(a) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
1st floor corridor skirting 1 x 1 x 1 x 2.050 x
1 x 1 x 1 x 9.700 x
1 x 1 x 1 x 3.650 x
1 x 1 x 1 x 5.000 x
1 x 1 x 1 x 0.750 x
1 x 1 x 1 x 0.350 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 0.620 x
1 x 1 x 1 x 0.300 x
1 x 1 x 1 x 0.620 x
1 x 1 x 1 x 0.300 x
1 x 1 x 1 x 6.700 x
1 x 1 x 1 x 4.450 x
1 x 1 x 1 x 2.600 x
1 x 1 x 1 x 2.300 x
1 x 1 x 1 x 0.300 x
1 x 1 x 1 x 6.170 x
1 x 1 x 1 x 3.300 x
1 x 1 x 1 x 0.180 x
1 x 1 x 1 x 3.600 x
1 x 1 x 1 x 0.840 x
1 x 1 x 1 x 4.900 x
1 x 1 x 1 x 0.510 x
1 x 1 x 1 x 4.300 x
1 x 1 x 1 x 0.810 x
1 x 1 x 1 x 3.600 x
1 x 1 x 1 x 2.300 x
1 x 1 x 1 x 0.520 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 4.000 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 0.680 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 0.500 x
1 x 1 x 1 x 4.500 x
1 x 1 x 1 x 0.530 x
1 x 1 x 1 x 2.320 x
1 x 1 x 2 x 2.800 x
1 x 1 x 1 x 1.950 x
1 x 1 x 1 x 2.150 x
1 x 1 x 1 x 3.300 x
1 x 1 x 1 x 1.750 x
1 x 1 x 1 x 2.300 x
1 x 1 x 1 x 2.450 x
1 x 1 x 1 x 3.300 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 0.370 x
2nd floor corridor skirting 1 x 1 x 1 x 2.070 x
1 x 1 x 1 x 3.750 x
1 x 1 x 1 x 3.750 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.320 x
1 x 1 x 1 x 3.700 x
1 x 1 x 1 x 2.190 x
1 x 1 x 1 x 0.350 x
1 x 1 x 1 x 0.500 x
1 x 1 x 1 x 0.430 x
1 x 1 x 1 x 0.350 x
1 x 1 x 2 x 1.530 x
1 x 1 x 2 x 0.600 x
1 x 1 x 2 x 0.310 x
1 x 1 x 1 x 4.500 x
1 x 1 x 2 x 0.380 x
1 x 1 x 2 x 0.500 x
1 x 1 x 1 x 0.180 x
1 x 1 x 1 x 3.220 x
1 x 1 x 1 x 1.200 x
1 x 1 x 1 x 0.160 x
1 x 1 x 1 x 0.930 x
1 x 1 x 1 x 2.600 x
1 x 1 x 1 x 0.150 x
1 x 1 x 1 x 0.340 x
1 x 1 x 1 x 5.000 x
1 x 1 x 1 x 0.860 x
1 x 1 x 1 x 0.340 x
1 x 1 x 1 x 2.300 x
1 x 1 x 1 x 5.350 x
1 x 1 x 1 x 0.570 x
1 x 1 x 1 x 4.300 x
1 x 1 x 1 x 0.810 x
1 x 1 x 1 x 3.600 x
1 x 1 x 1 x 2.300 x
1 x 1 x 1 x 0.520 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 4.100 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 0.680 x
1 x 1 x 1 x 0.100 x
1 x 1 x 1 x 0.500 x
1 x 1 x 1 x 4.500 x
3nd floor corridor skirting 1 x 1 x 1 x 2.070 x
1 x 1 x 1 x 3.750 x
1 x 1 x 1 x 3.750 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.320 x
1 x 1 x 1 x 3.700 x
1 x 1 x 1 x 2.190 x
1 x 1 x 1 x 0.350 x
1 x 1 x 1 x 0.430 x
1 x 1 x 1 x 0.350 x
1 x 1 x 2 x 1.530 x
1 x 1 x 2 x 0.600 x
1 x 1 x 2 x 0.310 x
1 x 1 x 1 x 0.200 x
1 x 1 x 1 x 1.830 x
1 x 1 x 1 x 0.210 x
1 x 1 x 1 x 0.330 x
1 x 1 x 1 x 1.680 x
1 x 1 x 1 x 5.000 x
1 x 1 x 1 x 0.320 x
1 x 1 x 1 x 2.000 x
1 x 1 x 1 x 0.350 x
1 x 1 x 1 x 0.920 x
1 x 1 x 1 x 1.100 x
1 x 1 x 1 x 0.480 x
1 x 1 x 1 x 1.670 x
1 x 1 x 1 x 8.650 x
1 x 1 x 1 x 9.150 x
Less -1 x 1 x 2 x 0.900 x
1 x 1 x 5 x 0.100 x
1 x 1 x 1 x 0.180 x
1 x 1 x 1 x 2.240 x
1 x 1 x 1 x 1.150 x
1 x 1 x 1 x 0.180 x
1 x 1 x 1 x 6.660 x
1 x 1 x 1 x 1.750 x
1 x 1 x 1 x 0.420 x
1 x 1 x 1 x 1.850 x
1 x 1 x 1 x 0.970 x
1 no. Staircase Riser & skirting
1st flight 1 x 1 x 10 x 1.520 x
Skirting 10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 3.260 x
1 x 1 x 1 x 1.550 x
1 x 1 x 1 x 1.140 x
2nd flight 1 x 1 x 10 x 1.520 x
Skirting 10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.350 x
1 x 1 x 1 x 0.150 x
1 x 1 x 1 x 3.440 x
1 x 1 x 1 x 1.120 x
3rd flight 1 x 1 x 10 x 1.520 x
Skirting 10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.540 x
1 x 1 x 1 x 1.140 x
1 x 1 x 2 x 1.500 x
Skirting 2 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.530 x
1 x 1 x 1 x 1.120 x
4th flight 1 x 1 x 10 x 1.520 x
10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.360 x
1 x 1 x 1 x 0.160 x
1 x 1 x 1 x 3.330 x
1 x 1 x 1 x 1.120 x
5th flight 1 x 1 x 10 x 1.520 x
10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.540 x
1 x 1 x 1 x 1.140 x
1 x 1 x 2 x 1.500 x
Skirting 2 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.530 x
1 x 1 x 1 x 1.120 x
6th flight 1 x 1 x 10 x 1.520 x
10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.360 x
1 x 1 x 1 x 0.160 x
1 x 1 x 1 x 3.430 x
1 x 1 x 1 x 1.120 x
7th flight 1 x 1 x 10 x 1.520 x
10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.540 x
1 x 1 x 1 x 1.140 x
1 x 1 x 2 x 1.500 x
Skirting 2 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.530 x
1 x 1 x 1 x 1.120 x
8th flight 1 x 1 x 10 x 1.520 x
10 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.640 x
1 x 1 x 1 x 3.130 x
1 x 1 x 2 x 1.580 x
2 no. Staircase Riser & skirting
8th flight 1 x 1 x 12 x 1.520 x
skirting 12 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.470 x
1 x 1 x 1 x 2.950 x
1 x 1 x 1 x 1.530 x
7th flight 1 x 1 x 11 x 1.520 x
11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.360 x
6th flight 1 x 1 x 11 x 1.520 x
skirting 11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.470 x
1 x 1 x 1 x 2.950 x
1 x 1 x 1 x 1.530 x
5th flight 1 x 1 x 11 x 1.520 x
11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.360 x
4th flight 1 x 1 x 11 x 1.520 x
skirting 11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.470 x
1 x 1 x 1 x 2.950 x
1 x 1 x 1 x 1.530 x
3rd flight 1 x 1 x 11 x 1.520 x
11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 0.400 x
2nd flight 1 x 1 x 11 x 1.520 x
skirting 11 x 0.5 x 0.31 x( 0.100 +
2
1 x 1 x 1 x 1.470 x
1 x 1 x 1 x 2.950 x
1 x 1 x 1 x 1.530 x
1st flight 1 x 1 x 11 x 1.520 x
skirting 11 x 0.5 x 0.31 x( 0.100 +
2
Left side entrance gate Step 1 x 1 x 1 x 4.500 x
1 x 1 x 1 x 4.820 x
1 x 1 x 2 x 1.850 x
1 x 1 x 2 x 3.750 x
Total Quantity
C/o to Page No.
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edg
5.2 gloss finish etc. complete as per design approved by Engineer-in-Charge.
Branch office 1 x 1 x 2 x 2 x
2nd floor
Lecture room 1 x 1 x 2 x 5 x
Lecture room 1 x 1 x 2 x 4 x
Lecture room 1 x 1 x 2 x 2 x
Assistant comdt 1 x 1 x 2 x 1 x
Waiting lounge 1 x 1 x 2 x 1 x
DIGP'S chamber 1 x 1 x 2 x 1 x
Corridor 1 x 1 x 2 x 1 x
1 x 1 x 2 x 1 x
Photo copy room 1 x 1 x 2 x 1 x
1 x 1 x 2 x 1 x
DY COMDT 1 x 1 x 2 x 2 x
ADM COY office 1 x 1 x 2 x 1 x
Conference hall 1 x 1 x 2 x 4 x
DIG room 1 x 1 x 1 x 1 x
Pantry room 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
3rd floor
Library & reading room 1 x 1 x 2 x 5 x
Lecture hall 1 x 1 x 2 x 1 x
1 x 1 x 2 x 1 x
Expandable store 1 x 1 x 2 x 2 x
Expandable store 1 x 1 x 2 x 1 x
Office & store 1 x 1 x 2 x 1 x
1 x 1 x 2 x 1 x
Gym room 1 x 1 x 2 x 2 x
1 x 1 x 2 x 3 x
Hall room 1 x 1 x 2 x 2 x
1 x 1 x 2 x 1 x
DY COMDT 1 x 1 x 2 x 2 x
ADM COY office 1 x 1 x 2 x 1 x
Conference hall 1 x 1 x 2 x 4 x
Admin building granite window sill
1st floor
Corridor window 1 x 1 x 2 x 1 x
Kitchen 1 x 1 x 2 x 1 x
Branch office 1 x 1 x 2 x 2 x
Toilet 1 x 1 x 2 x 1 x
Common toilet 1 x 1 x 2 x 1 x
Corridor window 1 x 1 x 2 x 1 x
Female toilet 1 x 1 x 2 x 1 x
Male toilet 1 x 1 x 2 x 1 x
2nd floor
Corridor window 1 x 1 x 2 x 1 x
Toilet 1 x 1 x 2 x 2 x
PA'S room 1 x 1 x 2 x 2 x
Toilet 1 x 1 x 2 x 1 x
Common toilet 1 x 1 x 2 x 1 x
Corridor window 1 x 1 x 2 x 1 x
Conference hall 1 x 1 x 2 x 1 x
Female toilet 1 x 1 x 2 x 1 x
Male toilet 1 x 1 x 2 x 1 x
3rd floor
Corridor window 1 x 1 x 2 x 1 x
Toilet 1 x 1 x 2 x 2 x
Furniture store 1 x 1 x 2 x 2 x
Store 1 x 1 x 2 x 2 x
Hall room 1 x 1 x 2 x 1 x
Female toilet 1 x 1 x 2 x 1 x
Male toilet 1 x 1 x 2 x 1 x
Stair case-1 1 x 1 x 2 x 4 x
Stair case-2 1 x 1 x 2 x 8 x
Extra Item Extra for providing and laying cement mortar 1:4 (1 cement : 4 course sand) as levelling course unde
No.-III/25 works.
Admin building vitrified floor tiles
1st floor
Model room 1 x 1 x 5.750 x 4.380 x
Gaurd room 1 x 1 x 5.930 x 3.880 x
Model room 1 x 1 x 5.930 x 4.380 x
Branch office 1 x 1 x 4.300 x 3.880 x
Branch office 1 x 1 x 4.300 x 3.880 x
Gaurd room 1 x 1 x 4.330 x 4.250 x
Branch office 1 x 1 x 4.280 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
Branch office 1 x 1 x 4.350 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
Branch office 1 x 1 x 4.430 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
Branch office 1 x 1 x 4.430 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
2nd floor
PA'S room 1 x 1 x 3.900 x 2.940 x
Door sill 1 x 1 x 0.900 x 0.070 x
Asstt comdt 1 x 1 x 2.930 x 1.880 x
Door sill 1 x 1 x 0.900 x 0.070 x
DIGPS CHEMBER 1 x 1 x 5.730 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
DY COMDT 1 x 1 x 4.280 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
ADM COY OFFICE 1 x 1 x 4.350 x 3.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
3rd floor
Library & reading room 1 x 1 x 5.800 x 7.880 x
Door sill 1 x 1 x 1.000 x 0.070 x
Recreation hall 1 x 1 x 5.930 x 5.880 x
Door sill 1 x 1 x 1.000 x 0.140 x
Office 1 x 1 x 2.900 x 3.650 x
1 x 0 x( 1.000 + 2.900 )x
2
Door sill 1 x 1 x 1.000 x 0.070 x
GYM office 1 x 1 x 3.880 x 2.750 x
Hall room 1 x 1 x 6.000 x 4.430 x
1 x 1 x 3.850 x 1.300 x
1 x 1 x 1.540 x 1.460 x
door sill 1 x 1 x 0.840 x 0.100 x
DIG toilet 1 x 1 x 2.150 x 2.710 x
Kitchen 1 x 1 x 1.540 x 2.640 x
door sill 1 x 1 x 0.900 x 0.170 x
3rd floor
Female toilet 1 x 1 x 3.990 x 2.660 x
Less wall 1 x 1 x 1.800 x 0.170 x
1 x 1 x 0.800 x 0.170 x
male toilet 1 x 1 x 4.000 x 3.270 x
Less wall 1 x 1 x 0.770 x 0.170 x
1 x 1 x 1.170 x 0.170 x
1 x 1 x 1.600 x 0.170 x
1 x 1 x 0.580 x 0.170 x
L.H.S Female toilet 1 x 1 x 1.030 x 1.420 x
door sill 1 x 1 x 0.800 x 0.170 x
1 x 1 x 1.080 x 4.000 x
1 x 1 x 0.770 x 1.710 x
Male toilet 1 x 1 x 1.030 x 1.420 x
door sill 1 x 1 x 0.800 x 0.170 x
1 x 1 x 1.030 x 1.420 x
door sill 1 x 1 x 0.800 x 0.170 x
1 x 1 x 1.760 x 0.800 x
1 x 1 x 3.850 x 1.300 x
1 x 1 x 1.540 x 1.460 x
door sill 1 x 1 x 0.840 x 0.100 x
Admin building Granite work
1st floor corridor
Start from R.H.S 1 x 1 x 12.050 x 1.950 x
Door sill 1 x 2 x 0.850 x 0.100 x
1 x 1 x 0.87 x 0.100 x
1 x 1 x 3.85 x 5.700 x
1 x 1 x( 0.314 x 3.800 x
2
2 x 0.5 x 0.75 x 1.100 x
Door sill 1 x 1 x 0.85 x 0.100 x
1 x 1 x 1.1 x 0.125 x
1 x 0 x 1.95 x( 8.400 x
2
Door sill 1 x 2 x 0.85 x 0.100 x
1 x 0 x 2.000 x( 1.700 x
2
1 x 0 x 2.080 x( 6.350 x
2
1 x 1 x 2.4 x 0.100 x
1 x 0.5 x 1.83 x 0.520 x
1 x 1 x 3.1 x 0.320 x
1 x 0 x 2.100 x( 10.420 x
2
1 x 0.5 x 2.3 x 2.700 x
1 x 0 x 0.500 x( 7.680 x
2
Total Quantity
C/o to Page No.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cov
13.10 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the
for tank
Tank =2 nos 1 x 1 x 1 x 2 x
(DUROPLUS)
Total Quantity
C/o to Page No.
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber
E.I No III/26 C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufactu
10.8 plastered wall surface to prepare the surface even and smooth complete.
DIG Room wash basin bottom 1 x 1 x 1 x 1.880 x
Pantry wash basin bottom 1 x 1 x 1 x 1.380 x
1 x 1 x 1 x 1.000 x
Partion wall between DIG toilet & pantry
1 x 1 x 1 x 0.560 x
Total Quantity
C/o to Page No.
Extra Item Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth
No. III/1
(a) Cement mortar 1:4 (1 cement : 4 coarse sand)
Circular drain
Right to culvrt junction 1 x 2 x 30.000 x 0.250 x ( 0.350 +
2
1 x 2 x 30.000 x 0.250 x ( 0.40 +
2
1 x 2 x 27.000 x 0.250 x ( 0.600 +
2
Total Quantity
C/o to Page No.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up s
sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285,
fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom
required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mit
15.1 mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. b
steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, pa
fasteners to be paid for separately) :
Mullion 2 x 2 x 1.230 =
Total length
Weight @
Vertical 57 x 2 x 1.275 =
Vertical 57 x 2 x 0.520 =
Total length
Weight @
Total length
Weight @
Mullion
Vertical 1 x 6 x 0.625 =
Horizontal 1 x 2 x 1.827 =
Total length
Weight @
Mullion
Vertical 1 x 6 x 0.587 =
Horizontal 1 x 2 x 1.720 =
Total length
Weight @
Mullion
Vertical 4 x 1 x 1.230 =
Total length
Weight @
Total length
Weight @
Mullion
Vertical 4 x 1 x 0.562 =
Horizontal 4 x 1 x 0.333 =
Total length
Weight @
Mullion
Vertical 5 x 1 x 1.030 =
Total length
Weight @
15 W07 (900 X 1200 mm) = 4 nos (Stair at right side / Fixed window)
outer frame
Horizontal 4 x 2 x 0.890 =
Vertical 4 x 2 x 1.198 =
Total length
Weight @
Mullion
Vertical 4 x 1 x 1.075 =
Total length
Weight @
Horizontal 1 x 2 x 1.158 =
Vertical 1 x 2 x 1.948 =
Total length
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
Weight @
22 FIRE SHAFT DOORS :
Right side door-03 Nos
outer frame
Sec-100x45x2.5
vertical 3 x 1 x 2 x 2.046 =
horizontal 3 x 1 x 1 x 1.090 =
Weight @
Weight @
Weight @
Total Quantity
C/o to Page No.
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provis
15.1.2 fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid f
Horizontal 1 x 4 x 0.384 =
Total length
Weight @
15 W07 (900 X 1200 mm) = 4 nos (Stair at right side / Fixed window)
snap beading 4 x 4 x 1.075 =
4 x 4 x 0.375 =
Total length
Weight @
Weight @
vertical(hinge) 3 x 1 x 1 x 1.986 =
Weight @
horizontal(middle) 3 x 1 x 1 x 0.917 =
Weight @
Beading
vertical 3 x 2 x 2 x 0.830 =
vertical 3 x 2 x 2 x 0.900 =
horizontal 3 x 4 x 2 x 0.917 =
Weight @
Weight @
vertical(hinge) 3 x 1 x 1 x 2.060 =
Weight @
horizontal(middle) 3 x 1 x 1 x 0.627 =
Weight @
Beading
vertical 3 x 2 x 2 x 0.970 =
vertical 3 x 2 x 2 x 0.830 =
horizontal 3 x 4 x 2 x 0.627 =
Weight @
Total Quantity
C/o to Page No.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM ru
gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of
15.2 beading shall be paid in basic item):
Total Quantity
C/o to Page No.
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in door
E.I No-III/27 clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured
Total Quantity
C/o to Page No.
Extra Item Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per
No.III/28 transparent or dyed to required colour or shade, with necessary screws etc. complete:
(a) 100 mm
Total Quantity
C/o to Page No.
Extra Item Providing and fixing aluminium friction stays, ISI marked, anodised (anodic coating not less than grade AC 10 a
No.III/29 transparent or dyed to required colour and shade, with necessary screws etc. complete.
(a) 250 mm size
Total Quantity
C/o to Page No.
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out o
rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. s
S.I. No I/1 vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket
be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size,
manufacturers specification and direction of Engineer-in-Charge.
Female toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
2nd floor
Male toilet right 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet left 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Corner toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
old DIG toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Female toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet right 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet left 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
3rd floor
Right side
Female toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
left side
Female toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Male toilet 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
left mumty 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Right mumty 1 x 1 x 1 x 2 x
1 x 1 x 1 x 1 x
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out o
rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. s
Extra item
vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket
No-III/39 be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size,
manufacturers specification and direction of Engineer-in-Charge.
Total Quanti
C/o to Page N
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19
and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of
approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 3
70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side form
mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on
form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be
S.I. No I/2 sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) th
cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC she
the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet b
side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width i
the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Eng
manufacturer’s specification & drawing
Total Quantity
C/o to Page No.
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred an
7.3 including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement
7.3.1 : 6 graded stone aggregate 20 mm nominal size).
New DIG toilet 1 x 1 x 1 x 2 x 2.10
1 x 1 x 1 x 1 x 0.80
E.I Providing and fixing wooden moulded beading to door and window frames with iron screws, p
No.III/32 coat on unexposed surface etc. complete.
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
3rd floor
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Vertical 1 x 1 x 1 x 2 x
Horizontal 1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
Item No. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Eng
III/33 Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangem
support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall e
control system for various vertical localtion in load application areas that accommodates multi directiona
movement without stress to it’s components. System shall consist of metal profiles with a universal alumin
member designed to accommodate various project conditions and finish floor treatments. The cover plate
designed of width and thickness required to satisfy projects movement and loading requirements and secured
members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / mov
directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide in
corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including
displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is m
requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall co
ASTM 6063.)
Expansion joint
Floor to Floor
1st,2nd,3rd floor 1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
1 x 1 x 1 x 1 x
Total Quantity
C/o to Page No.
Item No. Providing and fixing of expansion joint system of approved make and manufactures for various roof location
III/34 approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base memb
self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be suc
provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accomm
multidirectional seismic movement without stress to its components. System shall consist of metal pro
incorporates a universal aluminum base member designed to accommodate various project conditions
treatments. The cover plate shall be designed of width and thickness required to satisfy movement and
requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangem
freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that
slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all d
including vertical displacement. The Joint System shall resists damage or deterioration from the impact of fa
exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of
Barrier Membrane in the Joint System to
Item No. Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per draw
III/35 direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / c
arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansio
System suitable for vertical wall to wall/ wall to corner application, both new and existing construction
Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Join
shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap
the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.)
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Com
E.I No.III/36
(a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
(A) Admin building Ground floor Primer
Wall 1 x 1 x 1 x 13.300 x
Wall 1 x 1 x 1 x 6.300 x
Wall 1 x 1 x 1 x 5.200 x
Wall 1 x 1 x 1 x 9.450 x
Deduction for D -1 x 1 x 0.25 x 1.500 x
Wall 1 x 1 x 1 x 10.000 x
Parking
Celling 1 x 1 x 1 x 10.300 x
1 x 1 x 1 x 6.050 x
1 x 1 x 1 x 2.650 x
1 x 1 x 1 x 3.050 x
1 x 0.5 x 1 x 2.550 x
Column side 1 x 8 x 1 x 1.650 x
3 x 2 x 1 x 0.250 x
7 x 2 x 1 x 0.100 x
Beam side 2 x 1 x 1 x 3.850 x
4 x 2 x 1 x 3.850 x
3 x 2 x 1 x 2.000 x
1 x 2 x 1 x 3.350 x
5 x 2 x 1 x 2.700 x
3 x 2 x 1 x 0.450 x
2 x 2 x 1 x 2.700 x
1 x 2 x 1 x 1.500 x
Wall 1 x 1 x 1 x 10.300 x
Wall 1 x 1 x 1 x 9.100 x
Wall 1 x 1 x 1 x 8.300 x
Wall 1 x 1 x 1 x 4.600 x
Staircase
Ceilling 1 x 1 x 1 x 5.700 x
Beam side 1 x 2 x 1 x 3.300 x
Wall 2 x 1 x 1 x 5.700 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Deduction for D1 -1 x 1 x 0.25 x 1.200 x
Wall 2 x 1 x 1 x 3.300 x
Receiption
Ceilling 1 x 1 x 1 x 2.950 x
Column side 1 x 2 x 1 x 0.460 x
1 x 2 x 1 x 0.300 x
Beam side 2 x 2 x 1 x 2.950 x
1 x 2 x 1 x 2.050 x
1 x 2 x 1 x 2.050 x
1 x 2 x 1 x 2.050 x
Beam side 1 x 2 x 1 x 3.200 x
1 x 2 x 1 x 2.050 x
1 x 2 x 1 x 2.050 x
Column side 1 x 2 x 1 x 0.460 x
1 x 2 x 1 x 0.300 x
Wall 1 x 1 x 1 x 4.350 x
Wall 1 x 1 x 1 x 3.500 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Wall 1 x 1 x 1 x 3.450 x
Deduction for opening -1 x 1 x 1 x 2.050 x
Side wall 1 x 2 x 1 x 2.050 x
Side wall 1 x 2 x 1 x 1.900 x
Staircase
Ceilling 1 x 1 x 1 x 4.850 x
1 x 1 x 1 x 2.750 x
Column side 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.150 x
1 x 1 x 1 x 0.350 x
Beam side 2 x 2 x 1 x 2.000 x
Wall 2 x 1 x 1 x 4.850 x
Wall 1 x 1 x 1 x 2.950 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 4.700 x
Deduction for ED -1 x 1 x 1 x 1.800 x
Side 1 x 1 x 1 x 1.800 x
Side 1 x 1 x 2 x 2.400 x
Waiting launge
Ceilling 1 x 1 x 1 x 4.200 x
Beam side 1 x 2 x 1 x 3.450 x
Ceilling 1 x 1 x 1 x 6.250 x
Wall 1 x 1 x 1 x 8.600 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Wall 1 x 1 x 1 x 4.150 x
Wall 1 x 1 x 1 x 6.650 x
Wall 1 x 1 x 1 x 4.500 x
Deduction for opening -1 x 1 x 1 x 3.450 x
Side wall 1 x 2 x 1 x 3.450 x
Side wall 1 x 2 x 1 x 1.900 x
Wall 1 x 1 x 1 x 3.200 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
(B) Admin building First floor primer
2 x 2 x 1 x 0.100 x
Wall 2 x 1 x 1 x 5.750 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 7.750 x
Deduction for W1 -3 x 1 x 0.25 x 1.500 x
Model room
Ceilling 1 x 1 x 1 x 5.930 x
Beam side 1 x 2 x 1 x 4.100 x
Column side 1 x 2 x 1 x 0.350 x
Wall 2 x 1 x 1 x 5.750 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 4.375 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Wall 1 x 1 x 1 x 4.375 x
Model room
Ceilling 1 x 1 x 1 x 4.375 x
Beam side 1 x 2 x 1 x 4.100 x
Column side 1 x 2 x 1 x 0.350 x
Wall 2 x 1 x 1 x 5.925 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 1 x 1 x 1 x 4.375 x
Guard room
Ceilling 1 x 1 1 x 5.925 x
Column side 2 x 2 x 1 x 0.350 x
Wall 2 x 1 x 1 x 5.925 x
Deduction for W1 -2 x 1 x 0.25 x 1.450 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 3.875 x
Corridor
Ceilling 1 x 1 x 1 x 12.050 x
Beam side 4 x 2 x 1 x 1.950 x
Column side 1 x 1 x 1 x 0.350 x
Wall 1 x 1 x 1 x 1.950 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 3.200 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Staircase
Ceilling 1 x 1 x 1 x 5.700 x
Beam side 1 x 2 x 1 x 3.300 x
Wall 2 x 1 x 1 x 5.700 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Deduction for D1 -1 x 1 x 0.25 x 1.200 x
Wall 2 x 1 x 1 x 3.300 x
Looby
Ceilling 1 x 1 x 1 x 5.700 x
Column side 1 x 1 x 1 x 1.650 x
1 x 2 x 1 x 0.350 x
Beam side 1 x 2 x 1 x 5.700 x
1 x 2 x 1 x 2.700 x
1 x 2 x 1 x 4.500 x
1 x 2 x 1 x 3.050 x
Wall 1 x 1 x 1 x 5.700 x
Branch office
Ceilling 1 x 1 x 1 x 4.300 x
Beam side 2 x 2 x 1 x 3.700 x
Column side 2 x 2 x 1 x 0.350 x
Wall 2 x 1 x 1 x 3.875 x
Deduction for D6 -1 x 1 x 0.25 x 0.800 x
Wall 2 x 1 x 1 x 4.300 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Branch office
Ceilling 1 x 1 x 1 x 4.300 x
Beam side 1 x 2 x 1 x 3.350 x
Column side 2 x 2 x 1 x 0.350 x
Wall 2 x 1 x 1 x 4.300 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 3.875 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Wall 2 x 1 x 1 x 3.900 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 5.750 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D -1 x 1 x 0.25 x 0.800 x
Corridor
Ceilling 1 x 1 x 1 x 9.200 x
1 x 1 x 1 x 2.450 x
Beam side 4 x 2 x 1 x 2.000 x
Wall 2 x 1 x 1 x 12.050 x
Deduction for D2 -5 x 1 x 0.25 x 1.000 x
Branch office
Ceilling 2 x 1 x 1 x 3.880 x
Wall 2 x 2 x 1 x 4.430 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Wall 2 x 2 x 1 x 3.875 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Wall 2 x 1 x 1 x 4.300 x
Deduction for W8 -2 x 1 x 0.25 x 0.900 x
Branch office
Ceilling 1 x 1 x 1 x 3.880 x
Beam side 1 x 2 x 1 x 3.300 x
Column side 2 x 2 x 1 x 3.050 x
Wall 2 x 1 x 1 x 4.350 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Corridor
Ceilling 1 x 1 x 1 x 13.800 x
1 x 0.5 x 1 x 2.700 x
1 x 1 x 1 x 6.600 x
1 x 1 x 1 x 3.000 x
1 x 1 x 1 x 3.600 x
Beam side 3 x 2 x 1 x 2.000 x
1 x 2 x 1 x 3.150 x
2 x 2 x 1 x 2.000 x
2 x 2 x 1 x 2.250 x
2 x 2 x 1 x 2.950 x
1 x 2 x 1 x 4.700 x
Column side 1 x 1 x 1 x 2.700 x
1 x 2 x 1 x 0.800 x
1 x 2 x 1 x 3.500 x
Wall 1 x 1 x 1 x 2.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
Wall 1 x 1 x 1 x 3.200 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Wall 1 x 1 x 1 x 4.000 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
Looby
Ceilling 1 x 1 x 1 x 5.700 x
Column side 1 x 1 x 1 x 1.650 x
1 x 2 x 1 x 0.350 x
Beam side 1 x 2 x 1 x 5.700 x
1 x 2 x 1 x 2.700 x
1 x 2 x 1 x 4.500 x
1 x 2 x 1 x 3.050 x
Beam side 1 x 2 x 1 x 3.200 x
1 x 2 x 1 x 2.050 x
1 x 2 x 1 x 2.050 x
Column side 1 x 2 x 1 x 0.460 x
1 x 2 x 1 x 0.300 x
Branch office
Ceilling 1 x 1 x 1 x 3.880 x
Beam side 1 x 2 x 1 x 3.330 x
Column side 2 x 2 x 1 x 0.350 x
Wall 2 x 2 x 1 x 3.875 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Guard room
Ceilling 1 x 1 x 1 x 4.325 x
Wall 2 x 1 x 1 x 8.600 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Side wall 1 x 2 x 1 x 1.500 x
Side wall 1 x 2 x 1 x 1.950 x
Wall 2 x 1 x 1 x 7.100 x
Staircase
Ceilling 1 x 1 x 1 x 4.850 x
1 x 1 x 1 x 2.750 x
Column side 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.150 x
1 x 1 x 1 x 0.350 x
Beam side 2 x 2 x 1 x 2.000 x
Wall 2 x 1 x 1 x 4.850 x
Wall 1 x 1 x 1 x 2.950 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 4.700 x
Kitchen & pantry
Wall 2 x 1 x 1 x 1.770 x
Deduction for W7 -1 x 1 x 0.25 x 0.900 x
Deduction for D -1 x 1 x 0.25 x 0.800 x
Wall 2 x 1 x 1 x 1.810 x
Corridor
Wall 1 x 1 x 1 x 11.770 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Deduction for D -1 x 1 x 0.25 x 0.800 x
Wall 1 x 1 x 1 x 10.050 x
Branch office
Wall 2 x 1 x 1 x 3.875 x
Branch office
Wall 2 x 1 x 1 x 3.875 x
Corridor
Wall 1 x 1 x 1 x 2.000 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 13.350 x
Deduction for D2 -3 x 1 x 0.25 x 1.000 x
Wall 1 x 1 x 1 x 10.550 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 6.600 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Deduction for D3 -1 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 4.700 x
Wall 1 x 1 x 1 x 11.770 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Deduction for D -1 x 1 x 0.25 x 0.800 x
Wall 1 x 1 x 1 x 10.050 x
Female 1 x 1 x 1 x 1.370 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.900 x
Toilet
Ceilling 1 x 1 x 1 x 2.700 x
Ceilling 1 x 1 x 0.5 x 3.150 x
Ceilling 1 x 1 x( 2.800 x 2.100 )x
2
Branch office attach toilet-Ceiling 1 x 0.5 x 1 x 1.260 x
1 x 1 x( 1.200 x 1.320 )x
2
Conference room
Ceilling 1 x 1 x 1 x 10.050 x
Beam side 2 x 2 x 1 x 4.150 x
Column side 2 x 2 x 1 x 0.100 x
2 x 2 x 1 x 0.200 x
Wall 2 x 1 x 1 x 10.050 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
Wall 2 x 1 x 1 x 4.400 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Copy office
Ceilling 1 x 2 x 1 x 4.300 x
Beam side 1 x 2 x 1 x 3.300 x
Column side 2 x 2 x 1 x 0.300 x
Wall 2 x 1 x 1 x 4.300 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Dy. Com
Ceilling 1 x 1 x 1 x 4.300 x
Beam side 1 x 2 x 1 x 3.300 x
Column side 2 x 2 x 1 x 0.300 x
Wall 2 x 1 x 1 x 3.870 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Side wall 1 x 2 x 1 x 1.500 x
Side wall 1 x 2 x 1 x 1.950 x
Wall 2 x 1 x 1 x 4.300 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Side wall 1 x 2 x 1 x 1.500 x
Side wall 1 x 2 x 1 x 1.950 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Corridoor
Ceilling 1 x 1 x 1 x 9.050 x
Beam side 2 x 2 x 1 x 2.000 x
Ceilling 1 x 0.5 x 1 x 2.000 x
Beam side 1 x 2 x 1 x 3.450 x
Ceilling 1 x 1 x 1 x 6.550 x
Beam side 2 x 2 x 1 x 0.100 x
2 x 2 x 1 x 2.000 x
Wall 1 x 1 x 1 x 2.250 x
Wall 2 x 1 x 1 x 6.500 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Deduction for D3 -3 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 3.200 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Wall 1 x 1 x 1 x 4.000 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
Guard room
Ceilling 1 x 1 x 1 x 4.325 x
Wall 2 x 1 x 1 x 8.600 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Side wall 1 x 2 x 1 x 1.500 x
Side wall 1 x 2 x 1 x 1.950 x
Wall 2 x 1 x 1 x 7.100 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Staircase
Ceilling 1 x 1 x 1 x 4.850 x
1 x 1 x 1 x 2.750 x
Column side 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.150 x
1 x 1 x 1 x 0.350 x
Beam side 2 x 2 x 1 x 2.000 x
Wall 2 x 1 x 1 x 5.700 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Deduction for D1 -1 x 1 x 0.25 x 1.200 x
Wall 2 x 1 x 1 x 3.300 x
DIG room
Ceilling room 1 x 1 x 1 x 5.700 x
Beam side 1 x 2 x 1 x 3.300 x
Column side 2 x 2 x 1 x 0.300 x
Wall 2 x 1 x 1 x 5.700 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Wall 2 x 1 x 1 x 3.900 x
Deduction for D6 -1 x 1 x 0.25 x 0.800 x
PA room
Ceilling 1 x 1 x 1 x 3.900 x
Wall 2 x 1 x 1 x 2.950 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D3 -1 x 1 x 0.25 x 0.900 x
Staircase
Ceilling 1 x 1 x 1 x 5.700 x
Beam side 1 x 2 x 1 x 3.300 x
Wall 2 x 1 x 1 x 4.850 x
Wall 1 x 1 x 1 x 2.950 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 4.700 x
Looby
Ceilling 1 x 1 x 1 x 5.700 x
Column side 1 x 1 x 1 x 1.650 x
1 x 2 x 1 x 0.350 x
Beam side 1 x 2 x 1 x 5.700 x
1 x 2 x 1 x 2.700 x
1 x 2 x 1 x 4.500 x
1 x 2 x 1 x 3.050 x
Beam side 1 x 2 x 1 x 3.200 x
1 x 2 x 1 x 2.050 x
1 x 2 x 1 x 2.050 x
Column side 1 x 2 x 1 x 0.460 x
1 x 2 x 1 x 0.300 x
Waiting launge
Ceilling 1 x 1 x 1 x 2.750 x
Wall 2 x 1 x 1 x 4.000 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Wall 2 x 1 x 1 x 2.750 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Asst. comdt.
Ceilling 1 x 2 x 1 x 2.920 x
Wall 2 x 1 x 1 x 1.810 x
Wall 3 x 1 x 1 x 2.920 x
Deduction for W1 -1 x 1 x 0.25 x 1.500 x
Corridor
Ceilling 1 x 1 x 1 x 11.700 x
Beam side 3 x 2 x 1 x 2.000 x
Lacture room
Ceilling 1 x 1 x 1 x 5.920 x
Beam side 1 x 2 x 1 x 5.350 x
Column side 2 x 2 x 1 x 0.300 x
Wall 2 x 1 x 1 x 5.900 x
Wall 2 x 1 x 1 x 5.950 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Side wall 2 x 2 x 1 x 1.500 x
Side wall 2 x 2 x 1 x 1.950 x
Lacture room
Ceilling 1 x 1 x 1 x 5.720 x
Beam side 2 x 2 x 1 x 5.320 x
Column side 2 x 2 x 1 x 0.300 x
Wall 2 x 1 x 1 x 5.880 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Side wall 2 x 2 x 1 x 1.500 x
Side wall 2 x 2 x 1 x 1.950 x
Wall 2 x 1 x 1 x 5.750 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Side wall 2 x 2 x 1 x 1.500 x
Side wall 2 x 2 x 1 x 1.950 x
Lacture room
Ceilling 1 x 1 x 1 x 7.750 x
Beam side 1 x 2 x 1 x 7.150 x
1 x 2 x 1 x 5.680 x
Column side 2 x 2 x 1 x 0.300 x
2 x 2 x 1 x 0.100 x
Wall 2 x 1 x 1 x 5.880 x
Deduction for W1 -2 x 1 x 0.25 x 1.500 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Wall 1 x 1 x 1 x 7.750 x
Deduction for W1 -3 x 1 x 0.25 x 1.500 x
Corridor
Ceilling 1 x 1 x 1 x 12.050 x
1 x 1 x 1 x 1.520 x
Beam side 4 x 2 x 1 x 0.300 x
Ceilling 1 x 1 x 1 x 11.000 x
Beam side 1 x 2 x 1 x 11.000 x
1 x 2 x 1 x 5.500 x
Column side 2 x 2 x 1 x 0.750 x
2 x 2 x 1 x 0.350 x
Wall 1 x 1 x 1 x 2.000 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 3.200 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Side wall 1 x 2 x 1 x 1.200 x
Side wall 1 x 2 x 1 x 1.350 x
Wall 1 x 1 x 1 x 4.700 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 4.100 x
Deduction for W2 -1 x 1 x 0.25 x 1.200 x
Copy office
Wall 2 x 1 x 1 x 4.300 x
Corridor
Wall 1 x 1 x 1 x 9.050 x
Deduction for D2 -2 x 1 x 0.25 x 1.000 x
Wall 1 x 1 x 1 x 8.550 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Wall 1 x 1 x 1 x 2.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
PA room
Wall 2 x 1 x 1 x 3.900 x
Asst. comdt.
Wall 1 x 1 x 1 x 2.920 x
Wall 1 x 1 x 1 x 4.000 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Corridor
Wall 1 x 1 x 1 x 11.700 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D3 -1 x 1 x 0.25 x 0.900 x
Deduction for D -1 x 1 x 0.25 x 0.750 x
Wall 1 x 1 x 1 x 4.000 x
Wall 1 x 1 x 1 x 3.350 x
Wall 2 x 1 x 1 x 2.000 x
Deduction for D4 -2 x 1 x 0.25 x 1.500 x
Wall 1 x 1 x 1 x 5.700 x
Deduction for D1 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 2.050 x
Wall 1 x 1 x 1 x 4.000 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
Lacture room
Wall 1 x 1 x 1 x 5.880 x
Corridor
Wall 2 x 1 x 1 x 12.050 x
Deduction for D2 -6 x 1 x 0.25 x 1.000 x
Deduction for D3 -2 x 1 x 0.25 x 0.900 x
Wall 2 x 1 x 1 x 2.950 x
Wall 2 x 1 x 1 x 5.700 x
Looby
Wall 1 x 1 x 1 x 5.700 x
Deduction for D1 -1 x 1 x 0.25 x 1.200 x
Wall 1 x 1 x 1 x 2.050 x
Wall 1 x 1 x 1 x 4.000 x
Deduction for D2 -1 x 1 x 0.25 x 1.000 x
Deduction for D4 -1 x 1 x 0.25 x 1.500 x
left side building Toilet
Female 1 x 1 x 1 x 1.370 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.900 x
male part 1 x 1 x 1 x 3.900 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 1.600 x
1 x 1 x 1 x 1.600 x
1 x 1 x 1 x 0.960 x
1 x 1 x 1 x 1.010 x
1 x 1 x 1 x 1.010 x
1 x 1 x 1 x 1.690 x
1 x 1 x 1 x 1.800 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 2.400 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 2.875 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 1.765 x
1 x 1 x 1 x 1.485 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 3.870 x
Decduction D6-3 Nos 1 x 3 x 0.5 x 0.800 x
D3-2 Nos 1 x 2 x 0.5 x 0.900 x
Toilet
Ceilling 1 x 1 x 1 x 5.875 x
Beam side 1 x 2 x 1 x 3.750 x
Toilet
Ceilling 1 x 1 x 1 x 2.700 x
Ceilling 1 x 1 x 0.5 x 3.150 x
Ceilling 1 x 1 x( 2.800 x 2.100 )x
2
Branch office attach toilet-ceilling 1 x 0.5 x 1 x 1.260 x
1 x 1 x( 1.200 x 1.320 )x
2
common toilet-ceilling 1 x 1 x 1 x 1.300 x
1 x 1 x 1 x 0.960 x
1 x 1 x 1 x 0.470 x
1 x 1 x 0.5 x 0.850 x
Column 1 x 1 x 1 x 0.400 x
Saft Room
Ceilling 1 x 1 x 1 x 0.800 x
Saft Room 1 x 1 x 1 x 0.950 x
1 x 1 x 1 x 1.450 x
1 x 1 x 1 x 1.000 x
1 x 1 x 1 x 2.500 x
Saft Room
Ceilling 1 x 1 x 1 x 0.900 x
Saft Room
Wall 1 x 1 x 1 x 1.350 x
Wall 1 x 1 x 1 x 1.200 x
Wall 1 x 1 x 1 x 1.200 x
Admin building Third floor Plaster
Lecture Hall
Ceilling 1 x 1 x 1 x 5.750 x
Beam side 1 x 2 x 1 x 5.600 x
Column side 1 x 2 x 1 x 0.340 x
Column side 1 x 2 x 1 x 0.450 x
Recreation Hall
Ceilling 1 x 1 x 1 x 5.925 x
Side 1 x 2 x 1 x 0.450 x
Side 1 x 2 x 1 x 5.600 x
Column side 1 x 2 x 1 x 0.325 x
Column side 1 x 2 x 1 x 0.175 x
Column side 1 x 2 x 1 x 0.050 x
Female 1 x 1 x 1 x 1.370 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.400 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.900 x
male part 1 x 1 x 1 x 3.900 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.900 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 1.600 x
1 x 1 x 1 x 1.600 x
1 x 1 x 1 x 0.960 x
1 x 1 x 1 x 1.010 x
1 x 1 x 1 x 1.010 x
1 x 1 x 1 x 1.690 x
1 x 1 x 1 x 1.800 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 2.400 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 1.500 x
1 x 1 x 1 x 2.875 x
1 x 1 x 1 x 0.600 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 1.765 x
1 x 1 x 1 x 1.485 x
1 x 1 x 1 x 3.870 x
1 x 1 x 1 x 3.870 x
Decduction D6-3 Nos 1 x 3 x 0.5 x 0.800 x
D3-2 Nos 1 x 2 x 0.5 x 0.900 x
Toilet
Ceilling 1 x 1 x 1 x 5.875 x
Beam side 1 x 2 x 1 x 3.750 x
Toilet
Ceilling 1 x 1 x 1 x 2.700 x
Ceilling 1 x 1 x 0.5 x 3.150 x
Ceilling 1 x 1 x( 2.800 x 2.100 )x
2
Staire Room
Waist slab 1 x 1 x 2 x 3.100 x
Landing 1 x 1 x 2 x 3.300 x
Beam side 1 x 2 x 1 x 3.300 x
Saft Room
Ceilling 1 x 1 x 1 x 0.800 x
Exapandable Store-1
Ceilling 1 x 1 x 1 x 3.875 x
add column. Side 1 x 2 x 1 x 0.200 x
add column. Side 1 x 2 x 1 x 0.325 x
add column. Side 1 x 4 x 1 x 0.050 x
Beam side 1 x 2 x 1 x 3.750 x
Furniture Store
Ceilling 1 x 1 x 1 x 2.925 x
Exapandable Store-2
Ceilling room 1 x 1 x 1 x 3.875 x
Beam side 1 x 1 x 2 x 3.300 x
Col. Side 1 x 1 x 2 x 0.200 x
Col. Side 1 x 1 x 2 x 0.315 x
Store Room
Ceilling -triangle part 1 x 1 x 0.5 x 2.230 x
Ceilling 1 x 1 x 1 x 2.230 x
Saft Room
Ceilling 1 x 1 x 1 x 0.950 x
Office
Ceilling 1 x 1 x 1 x 5.300 x
Beam side 1 x 2 x 1 x 2.050 x
Col. Side 1 x 1 x 2 x 0.325 x
Store Right
Ceilling 1 x 1 x 1 x 4.375 x
Beam side 1 x 2 x 1 x 4.250 x
Gym office
Ceilling 1 x 1 x 1 x 3.875 x
Gymnasium
Ceilling 1 x 2 x 1 x 2.920 x
1 x 2 x 1 x 2.920 x
1 x 2 x 1 x 2.920 x
1 x 2 x 1 x 2.920 x
1 x 2 x 1 x 2.920 x
Corridor
Ceilling 1 x 1 x 1 x 10.400 x
Col. Side 1 x 2 x 2 x 0.325 x
Col. Side 1 x 2 x 2 x 0.200 x
Col. Side 1 x 1 x 1 x 12.050 x
Beam side 1 x 2 x 2 x 3.300 x
Hall
Ceilling 1 x 1 x 1 x 6.000 x
Beam side 1 x 2 x 1 x 4.150 x
Column side 1 x 2 x 1 x 0.150 x
Column side 1 x 2 x 1 x 0.050 x
Staire Room
Waist slab 1 x 1 x 2 x 3.100 x
Landing 1 x 1 x 2 x 3.300 x
Beam side 1 x 2 x 1 x 3.300 x
Gymnasium
1 x 1 x 1 x 3.875 x
Less D2 -01 No -1 x 1 x 0.5 x 1.000 x
Hall
1 x 1 x 1 x 4.425 x
Lecture Hall
2 x 1 x 1 x 5.875 x
1 x 1 x 1 x 5.750 x
-1 x 1 x 0.5 x 4.500 x
-1 x 1 x 0.5 x 5.100 x
extra for corner design 1 x 1 x 1 x 0.900 x
1 x 1 x 2 x 0.850 x
Deduction for D2 - 02 Nos -1 x 2 x 0.5 x 1.000 x
Recreational Hall
1 x 1 x 2 x 5.900 x
1 x 1 x 1 x 5.875 x
Deduction for D2 - 02 Nos -1 x 2 x 0.5 x 1.000 x
Deduction for CG -1 x 1 x 1 x 5.100 x
Add for jamb 1 x 1 x 1 x 0.850 x
Stair Case
Wall 1 x 1 x 1 x 5.100 x
Wall 1 x 1 x 1 x 4.800 x
Wall 1 x 1 x 1 x 3.050 x
Deduction for W8 -1 x 1 x 0.25 x 0.900 x
Store-1
Wall 2 x 1 x 1 x 5.700 x
Saft Room
Wall 1 x 1 x 1 x 1.350 x
Wall 1 x 1 x 1 x 1.200 x
Wall 1 x 1 x 1 x 1.200 x
Expandable room 1
Wall 1 x 1 x 2 x 3.875 x
Wall 1 x 1 x 2 x 5.800 x
Deduction for W7-02 Nos -1 x 2 x 0.5 x 1.000 x
Deduction for D2-02 Nos -1 x 2 x 0.5 x 1.500 x
Furniture Store
Wall 1 x 1 x 2 x 3.875 x
Wall 1 x 1 x 2 x 2.925 x
Deduction for W7-02 Nos -1 x 2 x 0.5 x 1.000 x
Deduction for D2-01 Nos -1 x 1 x 0.5 x 1.500 x
Expandable Store-2
Wall 2 x 1 x 1 x 5.725 x
Wall 1 x 1 x 1 x 3.875 x
Deduction for W1 -1 x 1 x 0.5 x 1.500 x
Deduction for D2 -1 x 1 x 0.5 x 1.000 x
Store Room
1 x 1 x 1 x 1.360 x
1 x 1 x 1 x 2.830 x
1 x 1 x 1 x 2.055 x
1 x 1 x 1 x 2.750 x
Deduction for W4-02 Nos -1 x 2 x 0.5 x 0.600 x
Deduction for D3-01 No -1 x 1 x 0.5 x 0.900 x
Saft Room
Wall 1 x 1 x 1 x 1.350 x
Wall 1 x 1 x 1 x 1.450 x
Wall 1 x 1 x 1 x 1.250 x
Office Room
1 x 1 x 1 x 5.625 x
Deduction for D2-01 No -1 x 1 x 0.5 x 1.000 x
1 x 1 x 1 x 2.960 x
1 x 1 x 1 x 1.585 x
curve part 1 x 1 x 1 x 2.250 x
1 x 1 x 1 x 3.600 x
-1 x 1 x 1 x 3.600 x
Add jamb 1 x 1 x 1 x 0.725 x
Store room-Right
1 x 1 x 1 x 4.475 x
1 x 1 x 1 x 5.250 x
Store room-Left
Wall 1 x 1 x 1 x 4.370 x
Deduction for D2 1 x 1 x 1 x 1.000 x
Wall 1 x 1 x 1 x 1.965 x
Wall 1 x 1 x 1 x 3.075 x
Wall 1 x 1 x 1 x 3.120 x
Deduction for CG -1 x 1 x 1 x 1.950 x
Add jamb 1 x 1 x 1 x 0.950 x
Add jamb 1 x 1 x 1 x 0.450 x
Gym Office
Wall 2 x 1 x 1 x 2.750 x
Wall 2 x 1 x 1 x 3.875 x
Deduction for W1-02 Nos -1 x 2 x 0.5 x 1.500 x
Deduction for D2-02 Nos -1 x 2 x 0.5 x 1.000 x
Gymnasium
Wall 1 x 1 x 2 x 10.500 x
Wall 1 x 1 x 1 x 3.875 x
Deduction for W1-03 Nos -1 x 3 x 0.5 x 1.500 x
Hall 1 x 1 x 2 x 6.000 x
1 x 1 x 1 x 4.425 x
Deduction for W2-01 Nos -1 x 1 x 0.5 x 1.200 x
Deduction for W1-02 Nos -1 x 2 x 0.5 x 1.500 x
Deduction for D2--01 Nos -1 x 1 x 0.5 x 1.000 x
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concre
cement concrete work, using cement content as per approved design mix, including pumping of concrete to s
excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended
3.5 per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and d
direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less
per design mix is payable/recoverable separately).
Centering and shuttering including strutting, propping etc. and removal of form for :
3.1
Foundations, footings, bases of columns, etc. for mass concrete.
3.1.1
culvert drain- foot 1 x 2 x 4.950 x
1 x 2 x 0.830 x
Total Quantity
C/o to Page No.
3.1 Centering and shuttering including strutting, propping etc. and removal of form for :
culvert drain-
2 x 2 x 4.950 x 0.540
1 x 1 x 4.950 x 0.530
Total Quantity
C/o to Page No.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1
conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown la
8.9 thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and m
pigments etc., complete.
1st floor
Branch office toilet 1 x 1 x 1 x 1.200 x
common toilet 1 x 1 x 1 x 1.450 x
Female toilet 1 x 1 x 1 x 3.990 x
Less wall -1 x 1 x 1 x 1.800 x
-1 x 1 x 1 x 0.800 x
male toilet 1 x 1 x 1 x 4.000 x
Less wall -1 x 1 x 1 x 0.770 x
-1 x 1 x 1 x 1.170 x
-1 x 1 x 1 x 1.600 x
-1 x 1 x 1 x 0.580 x
2nd floor
Branch office toilet 1 x 1 x 1 x 1.200 x
common toilet 1 x 1 x 1 x 1.450 x
Female toilet 1 x 1 x 1 x 3.990 x
Less wall -1 x 1 x 1 x 1.800 x
-1 x 1 x 1 x 0.800 x
male toilet 1 x 1 x 1 x 4.000 x
Less wall -1 x 1 x 1 x 0.770 x
-1 x 1 x 1 x 1.170 x
-1 x 1 x 1 x 1.600 x
-1 x 1 x 1 x 0.580 x
L.H.S Female toilet 1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.080 x
1 x 1 x 1 x 0.770 x
Male toilet 1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.760 x
1 x 1 x 1 x 3.850 x
1 x 1 x 1 x 1.540 x
door sill 1 x 1 x 1 x 0.840 x
DIG toilet 1 x 1 x 1 x 2.150 x
Kitchen 1 x 1 x 1 x 1.540 x
door sill 1 x 1 x 1 x 0.900 x
3rd floor
Female toilet 1 x 1 x 1 x 3.990 x
Less wall -1 x 1 x 1 x 1.800 x
-1 x 1 x 1 x 0.800 x
male toilet 1 x 1 x 1 x 4.000 x
Less wall -1 x 1 x 1 x 0.770 x
-1 x 1 x 1 x 1.170 x
-1 x 1 x 1 x 1.600 x
-1 x 1 x 1 x 0.580 x
L.H.S Female toilet 1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.080 x
1 x 1 x 1 x 0.770 x
Male toilet 1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.030 x
door sill 1 x 1 x 1 x 0.800 x
1 x 1 x 1 x 1.760 x
1 x 1 x 1 x 3.850 x
1 x 1 x 1 x 1.540 x
door sill 1 x 1 x 1 x 0.840 x
Total Quantity
C/o to Page No.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by t
) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Eng
8.8 in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) a
grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade
Wall tiles
DIG toilet 1 x 1 x 2 x 2.150 x
Less door -1 x 1 x 1 x 2.030 x
Jamb 1 x 1 x 1 x 2.080 x
1 x 1 x 1 x 0.800 x
1 x 1 x 2 x 2.710 x
Less window -1 x 1 x 1 x 0.970 x
Jamb 1 x 1 x 2 x 1.120 x
beam bottom 1 x 1 x 1 x 2.710 x
Skirting at corner toilet
Common toilet
1st & 2nd floor 1 x 1 x 2 x 1.920 x
1 x 1 x 2 x 0.450 x
Total Quantity
C/o to Page No.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with wa
8.1 less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick ce
1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., com
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water abso
0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12
8.11 cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigmen
complete.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including w
buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless stee
complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts
7.5 size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer
payment purpose only weight of stainless steel members shall be considered excluding fixing accessories suc
fasteners etc.)
Weight @
Weight @
Weight @
Total length
Weight @
Weight @
Weight @
Weight @
circular plate 2 x 1 x 2 =
Weight @
Weight @
circular plate 1 x 1 x 2 =
Weight @
Weight @
Weight @
Weight @
Total Quantity
C/o to Page No.
Extra Item Providing and fixing 100 mm brass locks (best make of approved quality) including handle for aluminium doors
No.III/30 necessary cutting and making good etc. complete.
Total Quantity
C/o to Page No.
Extra Item Providing and fixing ACP sheet of approved quality for aluminium doors including necessary cutting
No.III/31 complete.
For Adm. Building fire shafts doors
3 x 0.830 x 0.917
3 x 0.830 x 0.627
Total Quantity
C/o to Page No.
Extra item Add for using extra cement in the items of design mix over and above the specified cement content t
No. II/13
Qnty of item no 3.5.1 in this
Vide Page No- =
bill
Qnty of item no 3.5.1 in this
Vide Page No- =
bill
Total =
4.57 x( 3.810 -
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings an
drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating
conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cos
17.1
as cleats, sleeves, screws etc. necessary for fabrication ofextruded aluminium frame work. Nothing extra shall be paid o
Total length
Weight @
ver. 4x 2 x 7 x 1.307 =
Total length
Weight @
Total length
Weight @
ver. 2x 2 x 9 x 0.827 =
ver. 2x 2 x 9 x 0.854 =
Total length
Weight @
Total length
Weight @
ver. 2x 2 x 7 x 1.250 =
Total length
Weight @
Total length
Weight @
ver. 3x 2 x 7 x 1.215 =
Total length
Weight @
Total length
Weight @
ver. 3x 2 x 6 x 0.885 =
Total length
Weight @
Total length
Weight @
ver. 3x 2 x 6 x 0.865 =
Total length
Weight @
Total length
Weight @
ver. 3x 2 x 4 x 0.855 =
Total length
Weight @
Total Quantity
C/o to Page No.
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing
17.2 for linear as well as curvilinear portions of the building for all heights and all levels, including:
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 p
must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the alum
fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, n
etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM
tightness, pressure equalisation & drainage and protection against fire hazard including:
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 p
must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the alum
fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, n
etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM
tightness, pressure equalisation & drainage and protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required siz
profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing sys
RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon sep
bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numb
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant co
structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including do
tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant des
around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as re
site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertig
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorp
of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of requ
required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation
installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling tempora
services, cranes or cradles etc. as described above and as specified.
Item No. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float
III/37 approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to
colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specifi
Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in
For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves
silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Gl
the curtain glazing is included in cost of relevent Item*).
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties a
transmittance (VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, sha
(0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be deci
technical sanctioning authority as per the site requirement.
Glazing No-01 (front gate circular partoin) 1 x 1.432 x 1.345
2 x 1.382 x 1.345
1 x 1.393 x 1.345
6 x 1.432 x 1.332
6 x 1.382 x 1.328
6 x 1.382 x 1.332
6 x 1.393 x 1.316
Glazing No-02 (front face right) 9 x 1.162 x 0.832
9 x 1.162 x 0.854
9 x 1.162 x 0.832
Glazing No-03 (DIG stair right side) 14 x 1.035 x 1.254
Glazing No-04 (DIG stair left side) 14 x 1.160 x 1.254
7 x 1.122 x 1.254
Glazing No-05 (3rd floor right) 18 x 1.264 x 0.862
Glazing No-06 (3rd floor left) 12 x 1.200 x 0.870
6 x 1.200 x 0.895
Glazing No-07 (3rd floor building right back) 8 x 0.950 x 0.832
4 x 0.950 x 0.860
Total Quantity
C/o to Page No.
Item No.
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position.
III/38
a) Local hard wood
28 x 2 x 0.50 x 0.035 x
28 x 2 x 0.78 x 0.035 x
Total Quantity
C/o to Page No.
disposal of unserviceable
xternal work
ality :
ality :
l work :
to Page No.
al work :
35.67 Sqm
to Page No.
26.65 Sqm
to Page No.
= 1.32 Sqm
= 0.69 Sqm
= 0.48 Sqm
2.49 Sqm
to Page No.
12.75 Mtr.
to Page No.
3.600 5.09
= 536.30 Sqm
to Page No.
4.39 Sqm
to Page No.
77.77 Sqm
to Page No.
= 4.50 Mtr.
= 4.82 Mtr.
= 3.70 Mtr.
= 7.50 Mtr.
Mtr.
6.900 ) = 21.08 Mtr.
= 10.30 Mtr.
= 4.50 Mtr.
= 2.40 Mtr.
= 1.00 Mtr.
735.62 Mtr.
to Page No.
29.46 cum
to Page No.
4,000.00 Ltr
to Page No.
53.06 Cum
to Page No.
6.00 mtr
5.40 mtr
11.40 mtr
1.780 kg/mtr = 20.29 kg
5.69 mtr
5.12 mtr
10.81 mtr
0.553 kg/mtr = 5.98 kg
4.92 mtr
4.92 mtr
0.900 kg/mtr = 4.43 kg
0.44 mtr
0.467 kg/mtr = 0.21 kg
0.72 mtr
1.107 kg/mtr = 0.80 kg
171.00 mtr
222.07 mtr
393.07 mtr
1.780 kg/mtr = 699.66 kg
161.65 mtr
212.84 mtr
374.49 mtr
0.553 kg/mtr = 207.09 kg
78.20 mtr
145.35 mtr
59.28 mtr
282.83 mtr
0.900 kg/mtr = 70.38 kg
12.54 mtr
0.467 kg/mtr = 5.86 kg
20.52 mtr
1.107 kg/mtr = 22.72 kg
11.72 mtr
19.50 mtr
31.22 mtr
1.780 kg/mtr = 55.57 kg
10.95 mtr
18.75 mtr
29.70 mtr
0.553 kg/mtr = 16.42 kg
6.38 mtr
5.24 mtr
2.63 mtr
14.25 mtr
0.900 kg/mtr = 5.74 kg
1.10 mtr
0.467 kg/mtr = 0.51 kg
1.80 mtr
1.107 kg/mtr = 1.99 kg
1.80 mtr
3.90 mtr
5.70 mtr
1.780 kg/mtr = 10.15 kg
1.64 mtr
3.75 mtr
5.39 mtr
0.553 kg/mtr = 2.98 kg
1.28 mtr
1.05 mtr
0.77 mtr
0.34 mtr
3.44 mtr
0.900 kg/mtr = 1.15 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.36 mtr
1.107 kg/mtr = 0.40 kg
10.68 mtr
23.45 mtr
34.13 mtr
1.780 kg/mtr = 60.75 kg
10.44 mtr
22.50 mtr
32.94 mtr
0.553 kg/mtr = 18.22 kg
7.65 mtr
3.16 mtr
4.59 mtr
15.40 mtr
0.900 kg/mtr = 6.89 kg
1.32 mtr
0.467 kg/mtr = 0.62 kg
2.16 mtr
1.107 kg/mtr = 2.39 kg
7.12 mtr
8.13 mtr
15.25 mtr
1.780 kg/mtr = 27.15 kg
6.67 mtr
7.69 mtr
14.36 mtr
0.553 kg/mtr = 7.94 kg
3.71 mtr
3.71 mtr
0.900 kg/mtr = 3.34 kg
0.66 mtr
0.467 kg/mtr = 0.31 kg
1.08 mtr
1.107 kg/mtr = 1.20 kg
7.11 mtr
7.17 mtr
14.28 mtr
1.780 kg/mtr = 25.42 kg
6.63 mtr
6.72 mtr
13.35 mtr
0.553 kg/mtr = 7.38 kg
2.00 mtr
2.10 mtr
3.23 mtr
7.33 mtr
0.900 kg/mtr = 1.80 kg
0.66 mtr
0.467 kg/mtr = 0.31 kg
1.08 mtr
1.107 kg/mtr = 1.20 kg
5.91 mtr
7.23 mtr
13.14 mtr
1.780 kg/mtr = 23.39 kg
5.45 mtr
6.77 mtr
12.22 mtr
0.553 kg/mtr = 6.76 kg
2.00 mtr
2.17 mtr
2.59 mtr
6.76 mtr
0.900 kg/mtr = 1.80 kg
0.66 mtr
0.467 kg/mtr = 0.31 kg
1.08 mtr
1.107 kg/mtr = 1.20 kg
3.90 mtr
4.11 mtr
8.01 mtr
1.780 kg/mtr = 14.26 kg
3.95 mtr
3.75 mtr
7.70 mtr
0.553 kg/mtr = 4.26 kg
3.75 mtr
3.65 mtr
7.40 mtr
0.900 kg/mtr = 0.00 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.12 mtr
1.107 kg/mtr = 0.13 kg
3.88 mtr
3.69 mtr
7.57 mtr
1.780 kg/mtr = 13.47 kg
3.72 mtr
3.53 mtr
7.25 mtr
0.553 kg/mtr = 4.01 kg
3.52 mtr
3.44 mtr
6.96 mtr
0.900 kg/mtr = 0.00 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.12 mtr
1.107 kg/mtr = 0.13 kg
7.16 mtr
10.82 mtr
17.98 mtr
1.780 kg/mtr = 32.00 kg
6.56 mtr
10.20 mtr
16.76 mtr
0.553 kg/mtr = 9.27 kg
4.92 mtr
4.92 mtr
0.900 kg/mtr = 4.43 kg
0.88 mtr
0.467 kg/mtr = 0.41 kg
0.96 mtr
1.107 kg/mtr = 1.06 kg
4.78 mtr
9.54 mtr
14.32 mtr
1.780 kg/mtr = 25.49 kg
4.16 mtr
8.96 mtr
13.12 mtr
0.553 kg/mtr = 7.26 kg
1.90 mtr
0.98 mtr
2.88 mtr
0.900 kg/mtr = 2.59 kg
0.88 mtr
0.467 kg/mtr = 0.41 kg
0.96 mtr
1.107 kg/mtr = 1.06 kg
5.48 mtr
4.33 mtr
9.81 mtr
1.780 kg/mtr = 17.46 kg
4.88 mtr
8.04 mtr
12.92 mtr
0.553 kg/mtr = 7.14 kg
2.25 mtr
1.33 mtr
3.58 mtr
0.900 kg/mtr = 3.22 kg
0.88 mtr
0.467 kg/mtr = 0.41 kg
0.96 mtr
1.107 kg/mtr = 1.06 kg
9.00 mtr
11.54 mtr
20.54 mtr
1.780 kg/mtr = 36.56 kg
8.25 mtr
10.76 mtr
19.01 mtr
0.553 kg/mtr = 10.51 kg
5.15 mtr
5.15 mtr
0.900 kg/mtr = 4.64 kg
1.10 mtr
0.467 kg/mtr = 0.51 kg
1.80 mtr
1.107 kg/mtr = 1.99 kg
7.12 mtr
9.58 mtr
16.70 mtr
1.780 kg/mtr = 29.73 kg
6.58 mtr
8.96 mtr
15.54 mtr
0.553 kg/mtr = 8.59 kg
4.30 mtr
4.30 mtr
0.900 kg/mtr = 3.87 kg
0.88 mtr
0.467 kg/mtr = 0.41 kg
1.68 mtr
1.107 kg/mtr = 1.86 kg
2.36 mtr
4.17 mtr
6.53 mtr
1.780 kg/mtr = 11.62 kg
2.05 mtr
3.86 mtr
5.91 mtr
0.553 kg/mtr = 3.27 kg
0.44 mtr
0.467 kg/mtr = 0.21 kg
0.48 mtr
1.107 kg/mtr = 0.53 kg
2.38 mtr
4.22 mtr
6.60 mtr
1.780 kg/mtr = 11.75 kg
2.22 mtr
4.06 mtr
6.28 mtr
0.553 kg/mtr = 3.47 kg
1.06 mtr
1.35 mtr
0.61 mtr
3.02 mtr
0.900 kg/mtr = 2.72 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.12 mtr
1.107 kg/mtr = 0.13 kg
2.32 mtr
3.90 mtr
6.22 mtr
1.780 kg/mtr = 11.07 kg
2.16 mtr
3.74 mtr
5.90 mtr
0.553 kg/mtr = 3.26 kg
1.03 mtr
1.28 mtr
0.52 mtr
2.83 mtr
0.900 kg/mtr = 2.55 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.12 mtr
1.107 kg/mtr = 0.13 kg
2.34 mtr
2.81 mtr
5.15 mtr
1.780 kg/mtr = 9.17 kg
2.19 mtr
2.66 mtr
4.85 mtr
0.553 kg/mtr = 2.68 kg
1.28 mtr
1.28 mtr
0.900 kg/mtr = 1.15 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.36 mtr
1.107 kg/mtr = 0.40 kg
2.73 mtr
3.01 mtr
5.74 mtr
1.780 kg/mtr = 10.22 kg
2.58 mtr
2.86 mtr
5.44 mtr
0.553 kg/mtr = 3.01 kg
2.48 mtr
2.48 mtr
0.900 kg/mtr = 2.23 kg
0.22 mtr
0.467 kg/mtr = 0.10 kg
0.36 mtr
1.107 kg/mtr = 0.40 kg
24.40 mtr
15.58 mtr
39.98 mtr
1.780 kg/mtr = 71.16 kg
4.18 mtr
0.467 kg/mtr = 1.95 kg
12.28 mtr
3.27 mtr
12.72 mtr
2.40 mtr
30.67 mtr
1.870 kg/mtr = 57.35 kg
0.96 mtr
0.96 mtr
0.467 kg/mtr = 0.45 kg
2.88 mtr
2.88 mtr
0.650 kg/mtr = 1.87 kg
1792.36 Kg
to Page No.
9.94 mtr
3.64 mtr
13.58 mtr
0.613 kg/mtr = 8.32 kg
1.58 mtr
4.72 mtr
2.46 mtr
0.87 mtr
9.63 mtr
0.153 kg/mtr = 1.47 kg
292.98 mtr
103.74 mtr
396.72 mtr
0.613 kg/mtr = 243.19 kg
90.29 mtr
279.30 mtr
145.35 mtr
98.04 mtr
177.84 mtr
101.46 mtr
892.28 mtr
0.153 kg/mtr = 136.52 kg
25.70 mtr
10.40 mtr
36.10 mtr
0.613 kg/mtr = 22.13 kg
10.50 mtr
10.20 mtr
24.50 mtr
9.24 mtr
54.44 mtr
0.153 kg/mtr = 8.33 kg
5.14 mtr
1.54 mtr
6.68 mtr
0.613 kg/mtr = 4.09 kg
4.90 mtr
1.30 mtr
2.11 mtr
0.76 mtr
0.33 mtr
0.67 mtr
10.07 mtr
0.153 kg/mtr = 1.54 kg
30.84 mtr
9.12 mtr
39.96 mtr
0.613 kg/mtr = 24.50 kg
29.40 mtr
7.68 mtr
12.60 mtr
8.76 mtr
58.44 mtr
0.153 kg/mtr = 8.94 kg
14.94 mtr
6.36 mtr
21.30 mtr
0.613 kg/mtr = 13.06 kg
14.22 mtr
5.66 mtr
19.88 mtr
0.153 kg/mtr = 3.04 kg
8.52 mtr
6.38 mtr
14.90 mtr
0.613 kg/mtr = 9.13 kg
7.80 mtr
5.10 mtr
4.00 mtr
4.14 mtr
21.04 mtr
0.153 kg/mtr = 3.22 kg
8.76 mtr
5.12 mtr
13.88 mtr
0.613 kg/mtr = 8.51 kg
8.06 mtr
4.42 mtr
4.00 mtr
2.84 mtr
19.32 mtr
0.153 kg/mtr = 2.96 kg
11.25 mtr
10.62 mtr
21.87 mtr
0.153 kg/mtr = 3.35 kg
10.57 mtr
9.97 mtr
20.54 mtr
0.153 kg/mtr = 3.14 kg
19.84 mtr
6.11 mtr
25.95 mtr
0.613 kg/mtr = 15.91 kg
18.88 mtr
5.12 mtr
24.00 mtr
0.153 kg/mtr = 3.67 kg
6.46 mtr
7.78 mtr
14.24 mtr
0.613 kg/mtr = 8.73 kg
6.00 mtr
3.44 mtr
9.44 mtr
0.153 kg/mtr = 1.44 kg
4.88 mtr
4.56 mtr
9.44 mtr
0.613 kg/mtr = 5.79 kg
4.40 mtr
4.12 mtr
2.66 mtr
1.60 mtr
12.78 mtr
0.153 kg/mtr = 1.96 kg
20.80 mtr
7.70 mtr
28.50 mtr
0.613 kg/mtr = 17.47 kg
19.60 mtr
6.50 mtr
26.10 mtr
0.153 kg/mtr = 3.99 kg
17.20 mtr
6.00 mtr
23.20 mtr
0.153 kg/mtr = 3.55 kg
3.70 mtr
1.90 mtr
5.60 mtr
0.613 kg/mtr = 3.43 kg
3.48 mtr
1.68 mtr
5.16 mtr
0.153 kg/mtr = 0.79 kg
5.40 mtr
2.43 mtr
4.16 mtr
11.99 mtr
0.613 kg/mtr = 7.35 kg
5.10 mtr
2.09 mtr
4.02 mtr
11.21 mtr
0.153 kg/mtr = 1.72 kg
5.17 mtr
2.09 mtr
7.26 mtr
0.613 kg/mtr = 4.45 kg
4.94 mtr
1.86 mtr
6.80 mtr
0.153 kg/mtr = 1.04 kg
5.01 mtr
1.81 mtr
6.82 mtr
0.613 kg/mtr = 4.18 kg
4.78 mtr
1.58 mtr
2.48 mtr
0.88 mtr
9.72 mtr
0.153 kg/mtr = 1.49 kg
25.23 mtr
42.94 mtr
68.17 mtr
0.153 kg/mtr = 10.43 kg
5.960 mtr
5.960 mtr
1.125 kg/mtr = 6.71 kg
5.960 mtr
5.500 mtr
11.460 mtr
1.450 kg/mtr = 16.62 kg
2.750 mtr
2.750 mtr
1.030 kg/mtr = 2.83 kg
9.960 mtr
10.800 mtr
22.010 mtr
42.770 mtr
0.067 kg/mtr = 2.87 kg
6.180 mtr
6.180 mtr
1.125 kg/mtr = 6.95 kg
6.180 mtr
3.760 mtr
9.940 mtr
1.450 kg/mtr = 14.41 kg
1.880 mtr
1.880 mtr
1.030 kg/mtr = 1.94 kg
11.640 mtr
9.960 mtr
15.050 mtr
36.650 mtr
0.067 kg/mtr = 2.46 kg
657.62 Kg
to Page No.
173.64 Sqm
to Page No.
7.37 Sqm
to Page No.
= 4 Nos
= 114 Nos
= 10 Nos
= 2 Nos
= 12 Nos
= 6 Nos
= 6 Nos
= 6 Nos
= 8 Nos
= 4 Nos
= 4 Nos
= 10 Nos
= 2 Nos
= 2 Nos
= 2 Nos
192 Nos
to Page No.
= 8 Nos
= 228 Nos
= 20 Nos
= 4 Nos
= 24 Nos
= 12 Nos
= 12 Nos
= 12 Nos
= 16 Nos
= 8 Nos
= 8 Nos
= 20 Nos
= 4 Nos
= 4 Nos
= 4 Nos
384 Nos
to Page No.
= 80.91 Mtr
30.49 Sqm
to Page No.
= 4.20 Mtr.
= 0.80 Mtr.
5.00 Mtr.
= 3.50 kg/m
17.50 kg
to Page No.
d direction of Engineer-In-
entering arrangement and
or /floor to wall expansion
multi directional seismic
universal aluminum base
The cover plate shall be
ents and secured to base
y rotates / moves in all
ck and slide inside the
ections including vertical
rtight joint is mandatory
(Material shall confirm to
to Page No.
e.
= 7.00 Sqm
= 10.69 Sqm
= 2.62 Sqm
20.31 Sqm
to Page No.
129.23 Sqm
to Page No.
7.45 mtr
7.45 mtr
2.467 kg/mtr = 18.38 kg
28.80 mtr
0.65 mtr
29.45 mtr
0.671 kg/mtr = 19.76 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.080 kg
7.80 mtr
7.80 mtr
2.467 kg/mtr = 19.24 kg
28.88 mtr
1.40 mtr
0.30 mtr
30.58 mtr
0.671 kg/mtr = 20.52 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
7.80 mtr
7.80 mtr
2.467 kg/mtr = 19.24 kg
28.88 mtr
1.40 mtr
0.30 mtr
30.58 mtr
0.671 kg/mtr = 20.52 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
9.20 mtr
9.20 mtr
2.467 kg/mtr = 22.70 kg
34.40 mtr
34.40 mtr
7.65 mtr
7.65 mtr
1.137 kg/mtr = 8.70 kg
1.00 mtr
1.00 mtr
0.490 kg/mtr = 0.49 kg
10.00 Nos
10.00 Nos
0.010 kg/nos = 0.10 kg
1.00 Nos
1.00 Nos
0.030 kg/nos = 0.030 kg
7.80 mtr
7.80 mtr
2.467 kg/mtr = 19.24 kg
30.60 mtr
0.65 mtr
31.25 mtr
0.671 kg/mtr = 20.97 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
7.90 mtr
7.90 mtr
2.467 kg/mtr = 19.49 kg
30.80 mtr
30.80 mtr
0.671 kg/mtr = 20.67 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
7.87 mtr
7.87 mtr
2.467 kg/mtr = 19.42 kg
30.68 mtr
30.68 mtr
0.671 kg/mtr = 20.59 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.490 kg/mtr = 0.39 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
7.65 mtr
7.65 mtr
2.467 kg/mtr = 18.87 kg
30.08 mtr
30.08 mtr
0.671 kg/mtr = 20.18 kg
6.12 mtr
6.12 mtr
1.137 kg/mtr = 6.96 kg
0.80 mtr
0.80 mtr
0.010 kg/mtr = 0.01 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
9.30 mtr
9.30 mtr
2.467 kg/mtr = 22.94 kg
37.20 mtr
37.20 mtr
0.671 kg/mtr = 24.96 kg
7.65 mtr
7.65 mtr
1.137 kg/mtr = 8.70 kg
1.00 mtr
1.00 mtr
0.010 kg/mtr = 0.01 kg
10.00 Nos
10.00 Nos
0.010 kg/nos = 0.10 kg
4.00 Nos
4.00 Nos
0.030 kg/nos = 0.12 kg
6.04 mtr
6.04 mtr
2.467 kg/mtr = 14.90 kg
24.16 mtr
24.16 mtr
0.671 kg/mtr = 16.21 kg
4.59 mtr
4.59 mtr
1.137 kg/mtr = 5.22 kg
0.60 mtr
0.60 mtr
0.490 kg/mtr = 0.29 kg
6.00 Nos
6.00 Nos
0.100 kg/nos = 0.60 kg
4.00 Nos
4.00 Nos
0.030 kg/nos = 0.12 kg
7.45 mtr
7.45 mtr
2.467 kg/mtr = 18.38 kg
29.80 mtr
29.80 mtr
0.671 kg/mtr = 20.00 kg
5.36 mtr
5.36 mtr
1.137 kg/mtr = 6.09 kg
0.70 mtr
0.70 mtr
0.490 kg/mtr = 0.34 kg
8.00 Nos
8.00 Nos
0.010 kg/nos = 0.08 kg
2.00 Nos
2.00 Nos
0.030 kg/nos = 0.06 kg
2.04 mtr
2.04 mtr
1.210 kg/m = 2.47 kg
2.00 Nos
2.00 Nos
0.140 kg/nos = 0.28 kg
2.00 Nos
2.00 Nos
0.020 kg/nos = 0.04 kg
525.73 Kg
to Page No.
= 6 Each
6 Each
to Page No.
= 2.28 Sqm
= 1.56 Sqm
3.84 Sqm
to Page No.
4.34
0.23
4.57
3.300 )= 2.33 Qntl
47.65 mtr
47.65 mtr
3.125 kg/mtr = 148.91 kg
10.53 mtr
32.21 mtr
42.74 mtr
1.827 kg/mtr = 78.09 kg
57.88 mtr
18.97 mtr
73.19 mtr
150.04 mtr
0.230 kg/mtr = 34.51 kg
26.25 mtr
21.23 mtr
47.48 mtr
3.125 kg/mtr = 148.38 kg
20.11 mtr
20.11 mtr
1.827 kg/mtr = 36.74 kg
62.53 mtr
29.77 mtr
30.74 mtr
123.04 mtr
0.230 kg/mtr = 28.30 kg
26.85 mtr
4.15 mtr
31.00 mtr
3.125 kg/mtr = 96.88 kg
11.46 mtr
11.46 mtr
1.827 kg/mtr = 20.94 kg
27.80 mtr
35.00 mtr
62.80 mtr
0.230 kg/mtr = 14.44 kg
35.80 mtr
6.92 mtr
42.72 mtr
3.125 kg/mtr = 133.50 kg
19.40 mtr
19.40 mtr
1.827 kg/mtr = 35.44 kg
49.56 mtr
51.03 mtr
100.59 mtr
0.230 kg/mtr = 23.14 kg
19.01 mtr
15.43 mtr
34.44 mtr
3.125 kg/mtr = 107.63 kg
14.64 mtr
14.64 mtr
1.827 kg/mtr = 26.75 kg
45.36 mtr
31.86 mtr
77.22 mtr
0.230 kg/mtr = 17.76 kg
19.11 mtr
14.66 mtr
33.77 mtr
3.125 kg/mtr = 105.53 kg
13.87 mtr
13.87 mtr
1.827 kg/mtr = 25.34 kg
43.02 mtr
31.14 mtr
74.16 mtr
0.230 kg/mtr = 17.06 kg
12.53 mtr
7.82 mtr
20.35 mtr
3.125 kg/mtr = 63.59 kg
7.28 mtr
7.28 mtr
1.827 kg/mtr = 13.30 kg
22.80 mtr
20.52 mtr
43.32 mtr
0.230 kg/mtr = 9.96 kg
1186.19 Kg
to Page No.
= 53.94 Sqm
= 27.86 Sqm
= 18.57 Sqm
= 30.97 Sqm
= 21.83 Sqm
= 20.74 Sqm
= 10.19 Sqm
184.10 sqm
to Page No.
= 1.93 Sqm
= 3.72 Sqm
= 1.87 Sqm
= 11.44 Sqm
= 11.01 Sqm
= 11.04 Sqm
= 11.00 Sqm
= 8.70 Sqm
= 8.93 Sqm
= 8.70 Sqm
= 18.17 Sqm
= 20.36 Sqm
= 9.85 Sqm
= 19.61 Sqm
= 12.53 Sqm
= 6.44 Sqm
= 6.32 Sqm
= 3.27 Sqm
174.89 sqm
to Page No.
Name of work :- Construction of Administrative Block for CWS-III at GC, CRPF, Siliguri (West Bengal)
Agreement No. :- 03/EE/SE/GCD/2017-18.
Agency :- M/s. Tana Hali Construction & Co.
Serial No. of this Bill :- 9th R/A Bill
Date of Start (As per Agreement) :- 02 / 06 / 2017
Date of Completion:- In progress
Date of Abstract :- 20/10/2019
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 65
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 66
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 67
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 68
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 69
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Total 57714.30 Kg
Agreement Qnty 49087.55 Kg 68.10
Balance Qnty within 30% permissible limit 8626.75 Kg 68.10
Total 196592.46 Kg
Agreement Qnty 107117.38 Kg 68.10
Balance Qnty within limit 30% 32135.21 Kg 68.10
Balance Qnty beyond limit 30% 57339.87 Kg 68.10 51.08
Page 70
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
4.4 Brick work with clay fly ash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
4.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
Agrt. Qnty - 270.95 cum
Page 71
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 72
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 73
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Total 2816.10 kg
Agreement Qnty 500.00 kg 67.70
Balance Qnty within limit 30% 150.00 kg 67.70
Balance Qnty beyond limit 30% 2166.10 kg 67.70 50.78
7.4.1 Profile C
7.4.1.1 Fixing with adjustable lugs with split end tail to each
jamb
Agrt. Qnty - 86.25 Mtr.
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 76.90 Mtr
Total 76.90 Mtr 400.95
Page 74
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Total 525.73 Kg
Agreement Qnty 456.00 kg 619.40 600.00
Balance qnty within 30% limit 69.73 kg 619.40 600.00
8.3.1 18 mm thick.
Agrt. Qnty - 7.01 sqm
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 5.79 Sqm
Total 5.79 Sqm 337.25
Page 75
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
8.5.1 25 mm thick.
Agrt. Qnty - 168.41 Sqm
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 184.32 sqm
Page 76
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 77
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 78
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 79
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 80
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 81
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 82
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 83
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 84
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
76.60 mtr
Agreement Qnty 72.00 mtr 333.85
Qnty within 10% permissible limit 4.60 mtr 333.85
Page 85
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
95.30 mtr
Agreement Qnty 50.00 mtr 637.05
Qnty within 30% permissible limit 15.00 mtr 637.05
Qnty beyond 30% permissible limit 30.30 mtr 637.05 477.79
95.30 mtr
Page 86
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 87
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 88
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 89
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 90
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 91
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 92
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 93
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 94
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 95
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
5040.00 cm 6.22
(Full rate sanctioned by EE/GCD/CPWD/Gangtok)
Item No. Brick work with common burnt clay F.P.S. (non
II/8 modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level
in all shapes and sizes in : Cement mortar 1:6 (1
cement : 6 coarse sand)
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 75.22 Cum
Page 96
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 97
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Painting with synthetic enamel paint of approved
II/11 brand and manufacture of required colour to give an
even shade :
(a) One or more coats on old work.
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 365.33 sqm
Total 365.33 sqm 66.01
(Proposed 75% of Analysed MR is 67.95)
(Full rate sanctioned by EE/GCD/CPWD/Gangtok)
Extra item Add for using extra cement in the items of design
No. II/13 mix over and above the specified cement content
therein.
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 824.48 Qntl
Quantity B/F Page No...... of TMB 2.33 Qntl
Total 826.81 Qntl 667.92
(Full rate sanctioned by EE/GCD/CPWD/Gangtok)
Page 98
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Half brick work with clay fly ash F.P.S. (non modular)
III/3 bricks of class designation 7.5 in superstructure
above plinth level up to floor five level in
Page 99
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
per 50 kg
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 203.00 cement
per 50 kg
Total 203.00 cement 47.46
(Proposed 75% of Analysed MR Rs.62.88 )
Page 100
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Providing and fixing single equal plain junction of required degree :
III/10
(a) 100x100x100 mm
(i) Sand cast iron S&S as per IS - 3989
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 27.00 Nos
Total 27.00 Nos 637.46
(Proposed 75% of Analysed MR Rs.849.94 )
(a) 10 x 140 mm
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 99.00 Nos
Total 99.00 Nos 109.98
(Proposed 75% of Analysed MR Rs.142.64 )
Item No. Extra for cutting rebate in flush door shutters (Total
III/15 area of the shutter tobe measured).
Page 101
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 102
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Providing and laying ceramic glazed tiles anti skid
III/16 and anti stain & scratch tiles in different sizes
(thickness to be specified by the manufacturer) with
water absorption's less than 0.08% and conforming
to IS : 15622 of approved make in all colours and
shades, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints
with white cement and matching pigments etc.,
complete.
Item No. Providing and laying ceramic glazed tiles anti skid
III/17 and anti stain & scratch tiles in different sizes
(thickness to be specified by manufacturer) with
water absorption less than 0.08 % and conforming
to I.S. 15622, of approved make in all colours &
shade in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse
sand), including grouting the joint with white cement
& matching pigments etc. complete.
Item No. Providing and fixing flamed finish Granite stone for
III/18 wall lining (veneer work) including dado, skirting,
risers of steps etc., in required design and pattern
wherever required, stones of different finished
surface texture, on 12 mm (average) thick cement
mortar 1:3 (1 cement : 3 oarse sand) laid and jointed
with white cement slurry @ 3.3 kg/sqm including
pointing with white cement slurry admixed with
pigment of matching shade, including rubbing,
curing, polishing etc. all complete as per
Architectural drawings, and as directed by the
Engineer-in-Charge.
Flamed finish granite stone slab Jet Black, Cherry
(a) Red, Elite Brown, Cat Eye or equivalent.
Quantity B/F Page No....of TEMB 77.77 Sqm
Total 77.77 Sqm 4590.88
(Proposed 75% of Analysed MR Rs.6121.17)
Item No. Providing and fixing G.I. pipes complete with G.I.
III/19 fittings including trenching and refilling etc. External
work
(a) 50 mm nominal bore
Quantity B/F Page No....of TEMB 46.25 mtr
Total 46.25 mtr 530.12
(Proposed 75% of Analysed MR Rs.706.83)
Page 103
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Painting G.I. pipes and fittings with two coats of anti-
III/20 corrosive bitumastic paint of approved quality :
(a) 50 mm diameter pipe
Quantity B/F Page No....of TEMB 46.25 mtr
Total 46.25 mtr 17.51
(Proposed 75% of Analysed MR Rs.23.35)
Page 104
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Providing and fixing G.I. pipes complete with G.I.
III/22 fittings and clamps, i/c cutting and making good the
walls etc.
Internal work – Exposed on wall.
(a) 50 mm dia. nominal bore
Quantity B/F Page No....of TEMB 19.00 mtr
Total 19.00 mtr 613.73
(Proposed 75% of Analysed MR Rs.818.30)
Item No. Providing and fixing gun metal gate valve with C.I.
III/23 wheel of approved quality (screwed end) :
(d) 50 mm nominal bore
Quantity B/F Page No....of TEMB 2.00 nos
Total 2.00 nos 2399.45
(Proposed 75% of Analysed MR Rs.3199.27)
Page 105
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Providing and fixing G.I. Union in G.I. pipe including
III/24 cutting and threading the pipe and making long
screws etc. complete (New work)
(a) 80 mm nominal bore
Quantity B/F Page No....of TEMB 3.00 nos
Total 3.00 nos 759.74
(Proposed 75% of Analysed MR Rs.1012.98)
Page 106
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Extra for providing and laying cement mortar 1:4 (1
III/25 cement : 4 course sand) as levelling course under
floor tiles works.
Quantity B/F Page No..5. of TEMB 29.46 Cum
Total 29.46 Cum 3240.24
(Proposed 75% of Analysed MR Rs.4320.32)
Page 107
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 108
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Item No. Providing and fixing 100 mm brass locks (best make
III/30 of approved quality) including handle for aluminium
doors including necessary cutting and making good
etc. complete.
Quantity B/F Page No....of TEMB 6.00 Each
Total 6.00 Each 240.84
(Proposed 75% of Analysed MR Rs.321.12)
Page 109
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 110
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 111
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 112
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Page 113
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
RECOVERY
1 Security Deposit @ 2.5% on Agt. Amount
1,093,795.00
Rs.4,37,51,790.00
Page 114
Agt. Item
No. Quantity
Full rate Part Rate
Sub-Head and Item of works executed in this Unit
(Rs) (Rs)
bill
Certified that :-
1) The work has been carried out as per nomenclature of the items
and also as per the direction of the Engineer -in- charge.
2) No labour complaint has been recevied so far.
3) Water has been arranged by the Contractor.
4) Necessary T&P has been arranged by the Contractor.
5) The contractor has complied clause-36
Page 115
Amount
(Rs)
248960.00
248960.00
157087.54
1575.00
1575.00
31563.15
Page 116
Amount
(Rs)
33015.55
Page 117
Amount
(Rs)
179840.00
179840.00
10281.23
18500.00
18500.00
92623.34
181066.93
244398.27
Page 118
Amount
(Rs)
640559.92
45028.63
116318.05
669743.34
75739.14
1289.30
894064.76
132149.20
Page 119
Amount
(Rs)
924834.00
210825.88
35018.98
7236.44
Page 120
Amount
(Rs)
73502.93
17488.27
3342862.16
587481.44
7294693.58
2188407.80
2928920.56
10787.10
97.17
Page 121
Amount
(Rs)
2377426.24
287922.94
5201358.97
106688.07
33588.04
7098.87
Page 122
Amount
(Rs)
1478371.67
443506.05
887203.59
89691.20
26907.36
167533.11
52710.83
50945.00
15283.50
77223.08
Page 123
Amount
(Rs)
1539184.53
200760.38
129960.79
262730.16
12119.99
Page 124
Amount
(Rs)
28738.73
33850.00
10155.00
109994.56
19585.80
159.03
30833.06
Page 125
Amount
(Rs)
273600.00
41838.00
227684.65
16250.19
1952.68
3728.73
Page 126
Amount
(Rs)
192223.17
18159.67
18011.70
245121.72
73533.17
55658.36
Page 127
Amount
(Rs)
116882.07
681048.00
59899.50
26639.75
Page 128
Amount
(Rs)
1290.00
1770.60
297840.40
89351.67
432416.32
407481.41
23668.46
240331.74
72099.52
122349.35
Page 129
Amount
(Rs)
7904.09
90523.43
639556.82
191867.14
111575.37
40568.70
12170.61
46257.60
79124.97
23745.35
Page 130
Amount
(Rs)
92367.30
61221.76
18362.48
68020.06
61485.14
18455.02
67083.93
25662.73
7697.26
40936.41
13209.58
3956.99
10194.03
53024.99
15909.62
58233.37
Page 131
Amount
(Rs)
678141.00
203442.30
695638.13
89939.50
26981.85
85212.78
Page 132
Amount
(Rs)
7339.20
2140.60
18119.44
4242.70
3357.50
1007.25
9065.16
1525.80
Page 133
Amount
(Rs)
6238.00
1871.40
7017.75
2607.00
869.00
1303.52
Page 134
Amount
(Rs)
24375.00
7312.50
38207.29
30459.05
8272.88
19459.44
10390.40
Page 135
Amount
(Rs)
24037.20
1535.71
Page 136
Amount
(Rs)
31852.50
9555.75
14477.04
2283.30
1920.60
1012.50
303.75
460.26
11540.83
Page 137
Amount
(Rs)
29000.00
Page 138
Amount
(Rs)
31435.00
9430.50
10231.98
72470.00
21741.00
17094.02
176400.00
Page 139
Amount
(Rs)
627326.00
263048.00
138912.00
Page 140
Amount
(Rs)
36825.65
Page 141
Amount
(Rs)
620540.31
36267.99
355857.00
Page 142
Amount
(Rs)
289800.00
86940.00
38917.33
46,072,063.45
6,503,266.96 (A)
39,568,796.49
4,146,809.87
43,715,606.36
-8,699,405.67
41,519,467.65
Page 143
Amount
(Rs)
179648.05
7296.92
20719.19
7450.64
Page 144
Amount
(Rs)
163665.31
Page 145
Amount
(Rs)
218707.80
282877.66
31348.80
503919.84
91268.39
Page 146
Amount
(Rs)
28071.17
Page 147
Amount
(Rs)
24115.43
69094.68
552243.40
1330364.39
385298.99
70448.79
Page 148
Amount
(Rs)
885394.23
47564.64
17602.30
35217.44
52920.95
Page 149
Amount
(Rs)
213345.77
9634.38
Page 150
Amount
(Rs)
17211.42
10888.02
24715.33
51118.06
504450.96
Page 151
Amount
(Rs)
1295.05
Page 152
Amount
(Rs)
161790.82
13320.31
357032.74
24518.05
Page 153
Amount
(Rs)
809.84
Page 154
Amount
(Rs)
2860.56
11660.87
33301.24
3147.98
1387.25
4798.90
9476.22
5449.48
2580.09
Page 155
Amount
(Rs)
2279.22
Page 156
Amount
(Rs)
1562.32
1048.56
3841.12
1554.00
95457.47
16935.78
1193.65
Page 157
Amount
(Rs)
8403.84
Page 158
Amount
(Rs)
28427.52
1445.04
2215.41
29758.48
Page 159
Amount
(Rs)
47577.60
Page 160
Amount
(Rs)
38935.26
284672.08
55045.58
Page 161
Amount
(Rs)
356039.76
349370.76
187764.32
Page 162
Amount
(Rs)
4093.82
1228.15
27325.73
12546.46
Page 163
Amount
(Rs)
3761.73
57904.96
49,609,888.62
42,848,394.64
6,761,493.98
6,761,494.00
-360,660.00
6,400,834.00
Page 164
Amount
(Rs)
Engineer
al Sub-Division-V
D., Siliguri
Page 165
Amount
beyond
deviation limit
(Rs)
157087.54
31563.15
Page 166
Amount
beyond
deviation limit
(Rs)
10281.23
92623.34
+
-
Page 167
Amount
beyond
deviation limit
(Rs)
2928920.56
Page 168
Amount
beyond
deviation limit
(Rs)
887203.59
167533.11
77223.08
Page 169
Amount
beyond
deviation limit
(Rs)
109994.56
Page 170
Amount
beyond
deviation limit
(Rs)
Page 171
Amount
beyond
deviation limit
(Rs)
55658.36
Page 172
Amount
beyond
deviation limit
(Rs)
432416.32
122349.35
Page 173
Amount
beyond
deviation limit
(Rs)
111575.37
46257.60
Page 174
Amount
beyond
deviation limit
(Rs)
92367.30
68020.06
67083.93
40936.41
10194.03
58233.37
Page 175
Amount
beyond
deviation limit
(Rs)
695638.13
85212.78
Page 176
Amount
beyond
deviation limit
(Rs)
18119.44
9065.16
Page 177
Amount
beyond
deviation limit
(Rs)
7017.75
1303.52
Page 178
Amount
beyond
deviation limit
(Rs)
38207.29
Page 179
Amount
beyond
deviation limit
(Rs)
14477.04
460.26
Page 180
Amount
beyond
deviation limit
(Rs)
10231.98
17094.02
Page 181
Amount
beyond
deviation limit
(Rs)
38917.33
6,503,266.96
(A)
Page 182
Amount
beyond
deviation limit
(Rs)
849.94 637.455
459.8175
Page 183
Amount
beyond
deviation limit
(Rs)
Page 184
Amount
beyond
deviation limit
(Rs)
Page 185
Amount
beyond
deviation limit
(Rs)
Page 186
Amount
beyond
deviation limit
(Rs)
Page 187
Amount
beyond
deviation limit
(Rs)
Page 188
Amount
beyond
deviation limit
(Rs)
Page 189
Amount
beyond
deviation limit
(Rs)
Page 190
Amount
beyond
deviation limit
(Rs)
Page 191
Amount
beyond
deviation limit
(Rs)
Page 192
Amount
beyond
deviation limit
(Rs)
Page 193
Amount
beyond
deviation limit
(Rs)
Page 194
Amount
beyond
deviation limit
(Rs)
2504.54
Page 195
PART RATE STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over
1.1 ….50m and lift upto 1.5m, disposed earth to be
levelled and neatly dressed.
Page 196 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Providing and fixing stainless steel ( Grade
304) railing made of Hollow tubes, channels,
7.5 plates etc. including welding, grinding, buffing, 619.40 600.00
polishing and making curvature (wherever
required) and fitting the same with necessary
stainless steel nuts and bolts complete i/c fixing
the railing with necessary accessories &
stainless steel dash fasteners , stainless steel
Providing
bolts etc., and fixing Istsize,
of required quality ceramic
on the top ofglazed
the
wall tiles conforming to IS : 15622 (thickness to
floor or the side of waist slab with suitable
be specified by
arrangement asthe
permanufacturer ) of approved
approval of Engineer-in-
8.8 make
charge. ( for payment purpose only sqm
in all colours, ....@ 3.3kg per weight of 836.65 627.49
including pointing
stainless steel in whiteshall
members cement mixed with
be considered
pigment
excludingoffixing
matching shade complete.
accessories such as nuts,
bolts, fasteners etc.)
Page 197 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Stone screening 11.2 mm nominal size (Type
11.2.5 1471.00 1103.25 1103.25
B).
Page 198 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
13.3 Providing and fixing G.I. pipes complete with
637.05 477.79
G.I. fittings including trenching and refilling etc.
13.3.1 80 mm dia. nominal bore
Page 199 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Providing, laying and jointing glazed stoneware
14.1 pipes class SP-1 with stiff mixture of cemen...
testing of joints etc. complete :
Extra Item
Item No. Brick work with common burnt clay F.P.S. (non
III/1 modular) bricks of class designation 7.5 in
foundation and plinth in:
(a) Cement mortar 1:4 (1 cement : 4 coarse sand)
4745.77 5932.24
Item No. Half brick masonry with non modular fly ash
III/3 bricks of class designation 10, conforming to IS
: 12894, in super structure above plinth and
upto floorV level.
(a) Cement mortar 1 : 4 (1 cement : 4 coarse sand)
713.08 751.27
Page 201 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Item No. Extra for plastering exterior walls of height
III/7 more than 10 m from ground level for every 47.25 47.25
additional height of 3 m or part thereof.
(a) 100x100x100 mm
(i) Sand cast iron S&S as per IS - 3989
431.55 637.46
Item No. Providing and filling sand of grading zone V or 82.46 61.85
III/21 coarser
grade, allround the G.I. pipes in external work :
Item No. Providing and fixing gun metal gate valve with
III/23 C.I. wheel of approved quality (screwed end) :
(d) 50 mm nominal bore 3199.27 2399.45
Page 203 of 9
Item No. Brief Description of Item Full Rate Provisional Rate in Provisional Rate
previous bill in this bill
Item No. Providing and fixing G.I. Union in G.I. pipe
III/24 including cutting and threading the pipe and
making long screws etc. complete (New work)
(a) 80 mm nominal bore 1012.98 759.74
Page 205 of 9
engal).
eement) :- 02 / 06 / 2017
Remarks
Deviation
statement not yet
sanctioned
do
do
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
do
Page 206 of 9
Remarks
Minor rectification
pending at places.
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
do
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
do
do
do
do
Page 207 of 9
Remarks
do
do
do
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Page 208 of 9
Remarks
Deviation
statement not yet
sanctioned
Deviation
statement not yet
sanctioned
Page 209 of 9
Remarks
do
do
Minor rectification
are pending at
places.
Minor rectification
are pending at
places.
Minor rectification
are pending at
places.
Minor rectification
are pending at
places.
Page 210 of 9
Remarks
Minor rectification
are pending at
places & deviation
not yet sanctioned
Page 211 of 9
Remarks
do
do
do
do
Page 212 of 9
Remarks
do
do
do
do
do
do
do
do
do
do
do
do
do
do
Page 213 of 9
Remarks
do
do
do
do
do
do
do
do
do
do
do
do
do
Page 214 of 9
Remarks
do
do
do
do
do
do
do
do
do
Engineer
Sub-Division-V
., Siliguri.
Page 215 of 9
Since- Prev. of 9th R/A Bill
Name of work :- Construction of Administrative Block for CWS-III at GC, CRPF, Siliguri (West Bengal)
Agreement No. :- 03/EE/SE/GCD/2017-18.
Agency :- M/s. Tana Hali Construction & Co.
Serial No. of this Bill :- 9th R/A Bill
Date of Start (As per Agreement) :- 02 / 06 / 2017
Date of Completion:- In progress
Date of Abstract :- 20/10/2019
Page 2
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Sub Head - 2 : CONCRETE WORK
2.1 Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
shuttering - All work up to plinth level :
2.1.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
Agrt. Qnty - 45.80 cum
44.71 Cum
Total 44.71 Cum 5466.30
Page 3
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
3.1 Centering and shuttering including strutting,
propping etc. and removal of form for :
3.1.4 Lintels, beams, plinth beams, girders, bressumers
and cantilevers.
Agrt. Qnty - 2691.75 Sqm
3089.61 sqm
Total 3089.61 sqm
Agreement Qnty 2691.75 sqm 332.15
Balance Qnty within 30% permissible limit 397.86 sqm 332.15
Total 196592.46 Kg
Agreement Qnty 107117.38 Kg 68.10
Page 4
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Balance Qnty within limit 30% 32135.21 Kg 68.10
Balance Qnty beyond limit 30% 57339.87 Kg 68.10 51.08
4.4 Brick work with clay fly ash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
4.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
Agrt. Qnty - 270.95 cum
569.08 Cum
Total 569.08 Cum
Agreement Qnty 270.97 cum 5455.85
Balance Qnty within limit 30% 81.29 cum 5455.85
Balance Qnty beyond limit 30% 216.82 cum 5455.85 4091.89
Page 6
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
5.5 Providing and laying flamed finish Granite stone
flooring in required design complete as per the
architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as
specified and as directed by the Engineer- in-
Charge :
Page 7
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st
6.3 class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and
face veneers on both faces of shutters :
Total 2816.10 kg
Agreement Qnty 500.00 kg 67.70
Balance Qnty within limit 30% 150.00 kg 67.70
Balance Qnty beyond limit 30% 2166.10 kg 67.70 50.78
7.3 Providing and fixing T-iron frames for doors,
windows and ventilators of mild steel Tee-sections,
joints mitred and welded, including fixing of
necessary butt hinges and screws and applying a
priming coat of approved steel primer.
7.3.1 Fixing with 15x3 mm lugs 10 cm. long embedded in
cement concrete block 15x10x10 cm of C.C. 1:3:6
(1 Cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size).
Agrt. Qnty - 234.00 Kg
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 235.90 kg
Total 235.90 kg
Agreement Qnty 234.00 kg 83.70
Balance Qnty within limit 10% 1.90 kg 83.70
7.4.1 Profile C
7.4.1.1 Fixing with adjustable lugs with split end tail to each
jamb
Agrt. Qnty - 86.25 Mtr.
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 76.90 Mtr
Page 8
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Total 76.90 Mtr 400.95
Total 525.73 Kg
Agreement Qnty 456.00 kg 619.40 600.00
Balance qnty within 30% limit 69.73 kg 619.40 600.00
8.2 52 mm thick cement concrete flooring with concrete
hardener topping, under layer 40 mm thick cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) and top layer
12 mm thick cement hardener consisting of mix 1:2
(1 cement hardener mix : 2 graded stone aggregate
6 mm nominal size) by volume, .hardening
compound mixed @ 2 litre per 50kg of cement or as
per manufacturers specifications. This includes cost
of cement slurry, but excluding the cost of nosing of
steps etc. complete.
Agrt. Qnty - 425.38 Sqm
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 455.74 sqm
Total 455.74 sqm
Agreement Qnty 425.38 sqm 535.25
Balance Qnty within limit 30% 30.36 sqm 535.25
8.3.1 18 mm thick.
Agrt. Qnty - 7.01 sqm
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 5.79 Sqm
Total 5.79 Sqm 337.25
Page 9
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
8.5 Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the slab
including rubbing and polishing complete with base
of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
8.5.1 25 mm thick.
Agrt. Qnty - 168.41 Sqm
Quantity B/F Page No.69 of (Abstract-8th R/A Bill) 184.32 sqm
Page 10
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Page 12
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
10.6 Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
shade
10.6.1 New work (Two or more coats applied @ 1.43 ltr/ 10
sqm. over and including priming coat of exterior
primer applied @ 2.20 kg/ 10 sqm).
Agrt. Qnty - 3485.61 Sqm
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 953.38 sqm
Page 14
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Laying, spreading and compacting stone aggregate
of specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled
road / vibratory roller 8-10 tonne capacity in stages
11.3 to proper grade and camber, applying and brooming
requisite type of screening / binding material to fill
up interstices of coarse aggregate, watering and
compacting to the required density .
Page 16
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
12.12 Providing and fixing plain bend of required degree.
12.12.1 100 mm dia
12.12.1.1 Sand cast iron S&S as per IS - 3989
Agrt. Qnty - 10 nos
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 49.00 Each
Page 17
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
12.17 Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or without
vent arm complete, including cost of cutting and
making good the walls and floors :
12.17.1 100 mm inlet and 100 outlet
12.17.1.1 Sand cast iron S&S as per IS - 3989
Agrt. Qnty - 31 nos
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 31.00 Each
Page 18
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
13.2.2 20 mm dia nominal bore
Agrt. Qnty - 72 mtr
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 76.60 mtr
76.60 mtr
Agreement Qnty 72.00 mtr 333.85
Qnty within 10% permissible limit 4.60 mtr 333.85
95.30 mtr
Agreement Qnty 50.00 mtr 637.05
Qnty within 30% permissible limit 15.00 mtr 637.05
Qnty beyond 30% permissible limit 30.30 mtr 637.05 477.79
95.30 mtr
Page 21
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
16.1 Providing and laying water proofing treatment in
sunken portion of WCs, bathroom etc., by applying
cement slurry mixed with water proofing cement
compound consisting of applying : a) First layer of
slurry of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/sqm. This
layer will be allowed to air cure for 4 hours. b)
Second layer of slurry of cement @ 0.242 kg/sqm
mixed with water proofing cement compound @
0.126 kg/sqm. This layer will be allowed to air cure
for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment
and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
Page 22
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
a) Structural analysis & design and preparation of
shop drawings for the specified design loads
conforming to IS 875 part III (the system must
passed the proof test at 1.5 times design wind
pressure without any failure),
including functional design of the aluminum sections
for fixing glazing panels of various thicknesses,
a) Structuralcleats,
aluminium analysis & design
sleeves and and splice preparation
plates etc. of
shop
gaskets, drawings
screws, for toggles,the nuts, specified bolts,design clampsloads etc.,
conforming
structural and to weather
IS 875 silicone part III sealants, (the system must
flashings,
passed the proof test at
fire stop (barrier)-cumsmoke seals, microwave cured 1.5 times design wind
pressure
EPDM gaskets without any for failure),
water tightness, including functional pressure
b) Fabricating
design
equalisation and
of the& aluminum
drainagesupplying sections
and serrated
protectionfor fixingM.S.againsthot
glazingdip
fire
galvanised
panels of
hazard including: / Aluminium
various thicknesses, alloy of 6005
aluminium T5 brackets of
required
cleats, sleeves sizes, and sections spliceand plates profilesetc. gaskets,etc. to
accommodate
screws, toggles, 3nuts, Dimensional
bolts, clampsmovement etc., structural for
achieving
and weather perfect
silicone verticality
sealants,and fixing structural
flashings, fire stop
c) Providing and filling, two to part the pump RCC/ filled,
glazing
(barrier)-cumsmoke system rigidly
seals, microwave cured EPDM
structural silicone sealant and one part weather
masonry/structural
gaskets for water steel framework of building
silicone sealant stainlesscompatible steelwith the fasteners/
structural
structure
tightness, using pressure equalisation anchor
& drainage and
silicone sealant of required bite size in a clean and
bolts,
protectionnylon separator
against
d) Providingfactory fire
and fixing to
hazard prevent
in position bimetallic
including: flashings contacts
of solid,
controlled / work shop environment
with nuts and
aluminium sheet washers
1 mm etc. thickof and stainless
of setting
sizes,steelshapes
grade
including double sided spacer tape, blocks
316,
and of the
profiles, as required
required capacity
as per the and site inconditions,
required
and backer rod, all of approved grade, brand and
numbers.
to seal the gap
manufacture,
e) Making provision asbetween
perfor the
thedrainage
approvedbuilding
of sealant
structure and
moisture/design, water
all its
withinentersinterfaces
and allthe around with curtain
the glazing
perimeter glazingfor holding to make glass.itit
that curtain system to make
watertight.
watertight, by incorporating principles of pressure
equalization, providing suitable gutter profiles at
bottom (if required),
The
making item includesholes
necessary the of cost of getting
required sizes all andthe of
structural
required
Note:- 1. numbers
The cost of etc. complete.
providing This item
extruded includes
aluminium
and
cost functional
frames,
Note:-2. shadow
The following design
boxes, including
extruded
performance shop
aluminium
test are to bedrawings
section
checked
of Performance
all inputs
capping
conducted
1. for of designing,
fixing
on structural
Laboratory inglazing
the
Test labour
for Airfor
grooves
system fabricating
of the
if area
Leakage ofTest (-and
curtain
by ato –300pa)
structural
installation
glazing
50pa structural
glazing
of exceeds
aluminium
& designer,
(+50pa 2500
grid,
to Sqm
+300pa) dullyfrom
installation
as perapproved
theASTMcertified
of glazedE- by
2. Static Water Penetration Test. (50pa to 1500pa) as
laboratories
Engineer-incharge.
units,
and
283-04 T&P,
vermin
testing accreditated
scaffolding
proof
method stainless
for by
and
a NABL(National
other
steel
range ofwire incidental
testing mesh limit charges
shall
1 to be
per
3. ASTME-331-09
Dynamic Water testing
Penetration method (50pa for a1500pa)
toall range upastoper
Accreditation
The
200
paid item
mVhr”
including
for also Board
wastages
separately for
includes Testing
under theetc., andenabling
cost
relevant Calibration
of items mock underupsthis
temporary
2000
AAMA ml.”
501.01- 05 testing method for a range upto 2000
Laboratories),
4.
at Structural
site, cost Department
Performance
of all of Scienceand
Deflection
samples &
of Technologies,
deformation
the individual
structures
subhead.
ml”
India. Cost
However,
of testing is
for the
payable
purpose
separately.
of payment,
The NIT
only
by
5. static
Seismic
components air pressure
Movement test (1.5
Testor(upto times
30 mm)desing as wind
per described
AAMA
and
the services,
actual
approving
pressure area
authority
without cranes
of structural
anywill decide
failure) cradles
asthe glazing
pernecessityetc. as
(including
ASTME-330-10 of testing width
501.4-09
for
above
of testing
andtesting
in
as method
an approved
specified. for Qualitative
laboratory, test”field Tests to be on
tests
on the
testing
conducted basis
method on ofsite
cost
for a of
6. the work,
range
Onsite upto
Test cost
50
for mm” of theLeakage
Water test and for
the
grooves
Agrt. ) on
Qntyrange
importance the
of- the
126.00 external
work. sqm face
Performance shall be
Testingupto measured
of in
a pressure 50 kpa to 240 kpa (35psi)
assembled
sqm. up
Structural to working
two
glazing decimal
system structural
places.
Tests
Quantity B/F Page No...... of (Abstract-8th R/A Bill)to glazing
be conductedas specified,
in the 184.10 Sqm
2000ml”
cleaning
NBL Certifiedandlaboratories.
protection till the handing over of the
building for occupation. In the end, the Contractor
Total
shall 184.10 Sqm
Agreement Qnty
provide a water tight structural glazing having all the 126.00 Sqm 2556.15 2300.00
Balance Qntycharacteristics
performance within limit 30% etc. all complete as 37.80 Sqm 2556.15 2300.00
required, as per the Architectural drawings, as per 20.30 Sqm 2556.15 1917.11
item
description, as specified, as per the approved shop
drawings and as directed by the LessEngineer-in-
amount beyond limit deviation of 30% or 100% (-)
Charge.
Add for cost Index @ 10.48% : (+)
Page 23
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Extra Item Statement No.I
(Extra Item Sanctioned by AE-V vide even No.72, dated : 22.02.2018)
Item No. Finishing walls with Premium Acrylic Smooth
I/1 exterior paint with Silicone additives of required
shade.
(a) Old work (Two or more coats applied @ 1.43 ltr/ 10
sqm) over existing cement paint surface.
Page 24
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Reinforced cement concrete work in beams,
II/5 suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases
up to floor five level excluding the cost of centering,
shuttering, finishing and reinforcement with 1:1.5:3
(1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size)
Item No. Brick work with common burnt clay F.P.S. (non
II/8 modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level
in all shapes and sizes in : Cement mortar 1:6 (1
cement : 6 coarse sand)
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 75.22 Cum
Extra item Add for using extra cement in the items of design
No. II/13 mix over and above the specified cement content
therein.
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 826.81 Qntl
Total 826.81 Qntl 667.92
(Full rate sanctioned by EE/GCD/CPWD/Gangtok)
Page 26
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Half brick work with clay fly ash F.P.S. (non modular)
III/3 bricks of class designation 7.5 in superstructure
above plinth level up to floor five level in
Page 27
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Total 548.87 Sqm 388.70
(Proposed 75% of Analysed MR Rs.518.27 )
per 50 kg
Quantity B/F Page No...... of (Abstract-8th R/A Bill) cement
203.00
per 50 kg
Total 203.00 cement
47.46
(Proposed 75% of Analysed MR Rs.62.88 )
Item No. Providing and fixing single equal plain junction of required degree :
III/10
(a) 100x100x100 mm
(i) Sand cast iron S&S as per IS - 3989
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 27.00 Nos
Total 27.00 Nos 637.46
(Proposed 75% of Analysed MR Rs.849.94 )
(a) 10 x 140 mm
Quantity B/F Page No...... of (Abstract-8th R/A Bill) 99.00 Nos
Total 99.00 Nos 109.98
(Proposed 75% of Analysed MR Rs.142.64 )
Page 28
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Extra for cutting rebate in flush door shutters (Total
III/15 area of the shutter tobe measured).
Item No. Providing and laying ceramic glazed tiles anti skid
III/16 and anti stain & scratch tiles in different sizes
(thickness to be specified by the manufacturer) with
water absorption's less than 0.08% and conforming
to IS : 15622 of approved make in all colours and
shades, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints
with white cement and matching pigments etc.,
complete.
Item No. Providing and laying ceramic glazed tiles anti skid
III/17 and anti stain & scratch tiles in different sizes
(thickness to be specified by manufacturer) with
water absorption less than 0.08 % and conforming
to I.S. 15622, of approved make in all colours &
shade in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse
sand), including grouting the joint with white cement
& matching pigments etc. complete.
Page 29
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Providing and fixing flamed finish Granite stone for
III/18 wall lining (veneer work) including dado, skirting,
risers of steps etc., in required design and pattern
wherever required, stones of different finished
surface texture, on 12 mm (average) thick cement
mortar 1:3 (1 cement : 3 oarse sand) laid and jointed
with white cement slurry @ 3.3 kg/sqm including
pointing with white cement slurry admixed with
pigment of matching shade, including rubbing,
curing, polishing etc. all complete as per
Architectural drawings, and as directed by the
Engineer-in-Charge.
Flamed finish granite stone slab Jet Black, Cherry
(a) Red, Elite Brown, Cat Eye or equivalent.
Quantity B/F Page No....of TEMB 77.77 Sqm
Total 77.77 Sqm 4590.88
(Proposed 75% of Analysed MR Rs.6121.17)
Item No. Providing and fixing G.I. pipes complete with G.I.
III/19 fittings including trenching and refilling etc. External
work
(a) 50 mm nominal bore
Quantity B/F Page No....of TEMB 46.25 mtr
Total 46.25 mtr 530.12
(Proposed 75% of Analysed MR Rs.706.83)
Item No. Painting G.I. pipes and fittings with two coats of anti-
III/20 corrosive bitumastic paint of approved quality :
(a) 50 mm diameter pipe
Quantity B/F Page No....of TEMB 46.25 mtr
Total 46.25 mtr 17.51
(Proposed 75% of Analysed MR Rs.23.35)
Page 30
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Providing and fixing G.I. pipes complete with G.I.
III/22 fittings and clamps, i/c cutting and making good the
walls etc.
Internal work – Exposed on wall.
(a) 50 mm dia. nominal bore
Quantity B/F Page No....of TEMB 19.00 mtr
Total 19.00 mtr 613.73
(Proposed 75% of Analysed MR Rs.818.30)
Item No. Providing and fixing gun metal gate valve with C.I.
III/23 wheel of approved quality (screwed end) :
(d) 50 mm nominal bore
Quantity B/F Page No....of TEMB 2.00 nos
Total 2.00 nos 2399.45
(Proposed 75% of Analysed MR Rs.3199.27)
Item No. Providing and fixing G.I. Union in G.I. pipe including
III/24 cutting and threading the pipe and making long
screws etc. complete (New work)
(a) 80 mm nominal bore
Quantity B/F Page No....of TEMB 3.00 nos
Total 3.00 nos 759.74
(Proposed 75% of Analysed MR Rs.1012.98)
Page 31
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
(b) 50 mm nominal bore
Quantity B/F Page No....of TEMB 4.00 nos
Total 4.00 nos 390.58
(Proposed 75% of Analysed MR Rs.520.77)
Item No. Extra for providing and laying cement mortar 1:4 (1
III/25 cement : 4 course sand) as levelling course under
floor tiles works.
Quantity B/F Page No..5. of TEMB 29.46 Cum
Total 29.46 Cum 3240.24
(Proposed 75% of Analysed MR Rs.4320.32)
Page 32
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Item No. Providing and fixing square-mouth S.W. gully trap
III/26 class SP-1 complete with C.I. grating brick masonry
chamber with water tight C.I. cover with frame of
300x300 mm size (inside) the weight of cover to be
not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design.
Item No. Providing and fixing 100 mm brass locks (best make
III/30 of approved quality) including handle for aluminium
doors including necessary cutting and making good
etc. complete.
Quantity B/F Page No....of TEMB 6.00 Each
Total 6.00 Each 240.84
(Proposed 75% of Analysed MR Rs.321.12)
Page 34
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
Certified that :-
Page 35
Agt. Item Quantity
No. Full Rate Provisional
Sub-Head and Item of works executed in Unit
( Rs ) Rate (Rs.)
this bill
1) The work has been carried out as per nomenclature of the items
and also as per the direction of the Engineer -in- charge.
2) No labour complaint has been recevied so far.
3) Water has been arranged by the Contractor.
4) Necessary T&P has been arranged by the Contractor.
5) The contractor has complied clause-36
Page 36
st Bengal)
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 38
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 39
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 40
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
2188407.80 2188407.80 0.00
2928920.56 2928920.56 0.00
Page 42
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 43
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 44
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
30833.06 29222.00 1611.06
Page 45
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
116882.07 116882.07
Page 46
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 47
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 48
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 50
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 52
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 53
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 54
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 55
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 56
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 57
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 58
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 59
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 60
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 61
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
28071.17 28071.17 0.00
Page 62
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 63
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
213345.77 138002.38 75343.39
60.90
9634.38 9573.48
Page 64
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 65
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 66
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 67
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 68
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 69
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Page 70
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
4093.82 0 4093.82
1228.15 0 1228.15
27325.73 0 27325.73
12546.46 12546.46
3761.73 3761.73
57904.96 57904.96
6,761,502.00 6,761,502.00
Page 71
Upto date
8th R/A Bill Since Previous
amound
(In Rs.) (In Rs.)
(in Rs.)
Assitant Engineer
Siliguri Central Sub-Division-V
C.P.W.D., Siliguri
Page 72
Amount beyond
deviation limit (Rs)
157087.54
31563.15
Page 73
Amount beyond
deviation limit (Rs)
10281.23
92623.34
+
-
Page 74
Amount beyond
deviation limit (Rs)
2928920.56
Page 75
Amount beyond
deviation limit (Rs)
887203.59
167533.11
77223.08
Page 76
Amount beyond
deviation limit (Rs)
109994.56
Page 77
Amount beyond
deviation limit (Rs)
55658.36
Page 78
Amount beyond
deviation limit (Rs)
432416.32
122349.35
Page 79
Amount beyond
deviation limit (Rs)
111575.37
46257.60
92367.30
Page 80
Amount beyond
deviation limit (Rs)
68020.06
67083.93
40936.41
10194.03
Page 81
Amount beyond
deviation limit (Rs)
58233.37
695638.13
Page 82
Amount beyond
deviation limit (Rs)
85212.78
18073.57
Page 83
Amount beyond
deviation limit (Rs)
9065.16
7017.75
1303.52
38207.29
Page 84
Amount beyond
deviation limit (Rs)
14477.04
460.26
Page 85
Amount beyond
deviation limit (Rs)
10231.98
17094.02
Page 86
Amount beyond
deviation limit (Rs)
38917.33
6,503,221.09 15.29
8.26
Page 87
Amount beyond
deviation limit (Rs)
849.94 637.455
Page 88
Amount beyond
deviation limit (Rs)
8.00
Page 89
Blank Page for Divisional Work
Page 99
MATERIAL RECEIPT STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Page 101
Agreement) :- 02 / 06 / 2017
In progress
25 mm Total
30340.75 253858.68
0.00 43.05
0.00 54.35
0.00 312.37
30340.75 254268.44
606.815 5085.369
30947.57 259353.81
30.948 259.354
32.610 302.960
1.662 43.606
TANT ENGINEER/SCSD-V
Page 102
CEMENT CONSUMPTION STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
2.1 Providing and laying in position cement concrete
of specified grade excluding the cost of
centering and shuttering - All work up to plinth
level :
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
2.1.1 cum 44.71 3.2000
aggregate 20 mm nominal size)
4.4 Brick work with clay fly ash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
4.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 569.08 0.5500
Page 103 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
5.1.1.2 Area of slab upto 0.50 sqm 100 sqm 13.49 9.1200
Page 104 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
Page 105 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
12.17.1.1 Sand cast iron S&S as per IS - 3989 each 31.00 0.0250
13.2
Providing and fixing G.I. Pipes complete with G.I.
fittings and clamps,.. making good the wall :
13.2.1 15 mm dia nominal bore 100 mtr 33.95 0.050
13.2.2 20 mm dia nominal bore 100 mtr 76.60 0.060
Page 106 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
Providing, laying and jointing glazed stoneware
pipes class SP-1 ... of 1:1 (1 cement : 1 fine
14.1 sand) including testing of joints etc. complete :
Extra Item
Reinforced cement concrete work in walls (any
thickness), including attached pilasters, ... :
Item No. II/4 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded cum 21.58 4.0000
stone aggregate 20 mm nominal size)
Page 107 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
Item No. II/5 landings, balconies, shelves, chajjas, ... 1:1.5:3 cum 27.69 4.0000
(1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size)
Page 108 of 6
Coeff of
consumption
Item No. Sub-Head and Item of works Unit Quantity
(Quintal Per
Unit)
Providing and laying in position specified grade
Item No. II/9 of reinforced cement concrete,... finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded
(a) cum 11.86 4.0000
stone aggregate 20 mm nominal size)
Item No. Brick work with common burnt clay F.P.S. (non
III/1 modular) bricks of class designation 7.5 in
foundation and plinth in:
(a) Cement mortar 1:4 (1 cement : 4 coarse sand) cum 64.95 0.8400
Item No. Half brick masonry with non modular fly ash
III/3 bricks of class designation 10, conforming to IS :
12894, in super structure above plinth and upto
floorV level.
(a) Cement mortar 1 : 4 (1 cement : 4 coarse sand)
100 sqm 1178.53 10.6400
CEMENT:
Quantity received up to date 850.00 MT 17000.00
Page 110 of 6
(West Bengal).
Quantity
consumed (in
Quintal)
143.07
207.97
11.81
1612.89
2825.15
12.55
7.40
312.99
8.02
Page 111 of 6
Quantity
consumed (in
Quintal)
1.23
72.4
0.26
105.28
0.81
27.48
2.08
58.32
16.05
Page 112 of 6
Quantity
consumed (in
Quintal)
62.66
3.9
232.15
101.40
8.93
129.57
4.20
1150.16
0.01
Page 113 of 6
Quantity
consumed (in
Quintal)
0.78
0.02
0.05
Page 114 of 6
Quantity
consumed (in
Quintal)
5.60
37.99
61.32
1.60
249.43
86.32
Page 115 of 6
Quantity
consumed (in
Quintal)
110.76
41.37
Page 116 of 6
Quantity
consumed (in
Quintal)
47.44
54.56
125.4
20.74
292.84
23.99
1.35
6.74
Page 117 of 6
Quantity
consumed (in
Quintal)
111.95
1.62
8400.61 Qtl
168.01 Qtl
8568.62 Qtl
856.86 MT
823.26 MT
Bags
Bags
Assistant Engineer-V
Page 118 of 6
THEORETICAL CONSUMPTION STATEMENT FOR WALL PUTTY
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Item No. Sub-Head and Item of works Quantity Coeff of Quantity Unit
exeacuted consumption consumed
Cement based putty in this bill
Wall putty :-
consumption as per TC i/c variation 16100.00 kg
Item No. Sub-Head and Item of works Unit Quantity exeacuted in Coeff of consumption Quantity
this bill (in kg/joint) consumed (in Kg)
100 mm
12.16.1 Each 339.00 0.98 kg/ joint 332.22
Total = 332.22 kg
Add wastage @ 5% 16.61 kg
348.83 kg
PIG LEAD :-
consumption as per TC i/c variation 350.00 kg
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Required in Ltr/Kg
Item Brief Description Qnty. Unite Co-efficient
No Ltr
(A)Aclyric distemper
Distempering with oil bound washable
distemper of approved brand and
10.7 manufacture to give an even shade :
(D)WOOD PRIMER
(a) Water thinnable cement primer. 758.25 Sqm 0.070 53.08 Ltr
Two or more coats on new work 766.91 Sqm 0.095 72.86 Ltr
Total= 72.86 Ltr
lime
Item Brief Description Qnty. Unite Co-efficient
No Kg Required in Kg
Cement plaster skirting (up to 30 cm
10.12 height) with cement mortar 1:3 (1
cement : 3 coarse sand) finished with 9.00 Sqm 0.300 2.7 Kg
a floating coat of neat cement.
(C) Balance quantity beyond 30% of permissible deviation T
l otal= 2.7 Kg
Upto date consumption at site 560.00 Kg
upto date qnty. Received at site 560.00 Kg
02 / 06 / 2017
Remarks
5 Drum
5 Drum
engal).
02 / 06 / 2017
engal).
02 / 06 / 2017
Remarks
g the Indo-Bangladesh
OPs. SH: C/o. 2 nos.
ur District of West
Service connection to
Remarks
30X20=600
32x25=800
3x20+1x4=64
13x20+2x4=268
30X20=600
1x4+1x1=5
5x20=100
32x25=800
3x20+1x4=64
14x10=140
THEORETICAL CONSUMPTION STATEMENT FOR ROAD ROLLER
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Total=
Agency JE/SCSD-V
D ROLLER
Road Roller
Remarks
Required in days
0.76 Day
11.50 Days
12.26 Days
JE/SCSD-V
THEORETICAL CONSUMPTION STATEMENT FOR ADMIXURE IN M-25 CONCRETE
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Total = 3357.05 Kg
Agency :- M/s. Tana Hali Construction & Co. Division : GCD Gangtok
Agreement No. :- 03/EE/SE/GCD/2017-18. Sub-Division : SCSD-V
Serial No of Bill:-8th & R/A Bill.
THEORETICAL CONSUMPTION STATEMENT FOR ROAD MATERIALS
Volume Co-eff
Total Area
First Layer
#REF! 1/0.10 #REF!
Qnty B/F TMB/Page No- Second Layer
#REF! 1/.075 #REF!
Third Layer
#REF! 1/0.075 #REF!
Stone
Agmt. Agrregate/Screeni
Descriptions of item Ref Qnty. Road Metal (Net) Stone dust
Sl No Item No Unit Co-eff. ng
TMB/
Page No- in Cum Co-eff unit 90-45mm 63-45mm 53-22.4mm 13.2mm 11.2mm Binding material
1 11.2 Supplying and stacking at site.
11.2.1
90 mm to 45mm size stone
agregate #REF! Sqm 1.21 10Sqm #REF!
11.2.2
63 mm to 45 mm size stone
aggregate. #REF! Sqm 0.91 10Sqm #REF!
11.2.3
53 mm to 22.4 mm size stone
aggregate. #REF! Sqm 0.91 10Sqm #REF!
2 Stone Screening
11.2.4 13.2mm(1st or bottom layer) #REF! Sqm 0.27 10Sqm #REF!
11.2.4 13.2mm(2nd or middle layer) #REF! Sqm 0.12 10Sqm #REF!
11.2.5 11.2mm(3rd or top layer) #REF! Sqm 0.14 10Sqm #REF!
Actual issued/consumed at site of work 172.48 126.30 125.10 56.44 20.91 40.85
Cum Cum Cum Cum Cum Cum
Qnty B/F Abs Of Qnty of TMB
172.48 126.30 125.10 56.44 20.91 40.85
Sqm
Sqm
Sqm
Theoretical Consumption Statement for Mandatory Test
Name of Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
work:-
Page 150 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
3.5 Providing and laying in position machine
batched and machine mixed design mix M-
25 grade cement concrete for reinforced
cement concrete work, using cement
content as per approved design mix,
including pumping of concrete to site of
3.5.1 All works
laying butupto plinth level.
excluding the cost of centering, cum 423.33 0.425 179.92 0.57 241.30
shuttering, finishing and reinforcement,
3.5.2 All works above
including plinth in
admixtures levelrecommended
upto floor V
level cum 741.51 0.425 315.14 0.57 422.66
proportions as per IS: 9103 to accelerate,
retard setting of concrete, improve
workability
Brick work without impairing
with common strength
burnt and
clay F.P.S.
durability as per direction of Engineer-in-
(non modular) bricks of class designation
4.1 charge.
7.5 in foundation and plinth in :
4.2.1 cement mortar 1:4 (1 cement : 4 coarse sand) sqm 69.58 0.03 2.09
Page 151 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
52 mm thick cement concrete flooring with
concrete hardener topping, under layer 40
mm thick cement concrete 1:2:4 (...cost of
8.2 cement slurry, but excluding the cost of sqm 455.74 0.043 19.60
nosing of steps etc. complete.
Page 152 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
8.11 Providing and laying Vitrified tiles in
different sizes (thickness to be specified by
manufacturer) ... cement mortar 1:3 (1
cement: 3 coarse sand), including grouting
the joint with white cement & matching
pigments etc. complete.
Page 153 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
Page 154 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
With average thickness of 120 mm and
16.2.1.
minimum thickness at khurra as 65 mm. sqm 644.53 0.02 12.89
Page 155 of 4
Coarse Sand Fine Sand 40 mm Aggregate 20 mm Aggregate
Quantity Coeff of Coeff of Coeff of Coeff of
Item No. Sub-Head and Item of works Unit exeacuted in consumption Quantity consumptio
Quantity
consumptio
Quantity
consumption
Quantity
this bill consumed consumed consumed consumed
(Cum Per n (Cum Per n (Cum Per (Cum Per
(Cum) (Cum) (Cum) (Cum)
Unit) Unit) Unit) Unit)
Cement mortar 1:4 (1 cement : 4 coarse
(a) sand) cum 64.95 0.22 14.29
Contractor
Page 156 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
0.28 12.52
Page 157 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
0.28 118.53
0.28 207.62
350.00 7984.00
47.00 3270.00
350.00 199178.00
Page 158 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
Page 159 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
0.11 29.29
Page 160 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
172 3612.00
Page 161 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
0.28 6.04
0.28 7.75
350.00 26327.00
0.28 3.32
Page 162 of 4
10 mm Aggregate Bricks Fly Ash Bricks
Coeff of Coeff of Quantity Coeff of Quantity
Quantity consumption consumed (Nos.) consumption consumed (Nos.)
consumption
consumed (Cum Per (Cum Per
(Cum Per
(Cum) Unit) Unit)
Unit)
350.00 22733.00
47.00 55391.00
0.28 1.81
Assistant Engineer-V
Page 163 of 4
MANDATORY TEST STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
4 Coarse Sand 1006.73 Cum Partical Size field 40 Cum 25 Nos 28 Nos
5 Fine Sand 141.92 Cum Partical Size field 40 Cum 4 Nos 6 Nos
7 Water for constructional use 25 months IS-456:2000 & IS-3025 Lab 3 each 8Nos 09 Nos
Page 164 of 2
Sl Materials Received Unit Name of Test Type of Frequency of Required Test to be
No. Quantity ref.BIS. Test Test No. of Test Conducted
Field/Lab.
12 Silt Contain Fine sand 141.92 Cum field 20 Cum 7Nos 23 Nos
13 Bricks 318495 Nos Lab 50000 03Nos 6No 06 Nos
Page 165 of 2
Sl Materials Received Unit Name of Test Type of Frequency of Required Test to be
No. Quantity ref.BIS. Test Test No. of Test Conducted
Field/Lab.
14 Road Materials
90 mm-45 mm 172.48 Cum
Los Angles Test IS:-2386(Part-IV) LAB 200 Cum 01 No. 01 No.
Abration Test or Aggragate IS:-2386(Part-V) & LAB 200 Cum 01 No. 01 No.
impact value IS:5640
Flakiness Index IS:-2386(part-I) LAB 200 Cum 01 No. 01 No.
63 mm-45 mm 126.30 Cum
Los Angles Test IS:-2386(Part-IV) LAB 200 Cum 01 No. 01 No.
Abration Test or Aggragate IS:-2386(Part-V) & LAB 200 Cum 01 No. 01 No.
impact value IS:5640
Flakiness Index IS:-2386(part-I) LAB 200 Cum 01 No. 01 No.
53 mm -22.4 mm 125.10 Cum
Los Angles Test IS:-2386(Part-IV) LAB 200 Cum 01 No. 01 No.
Abration Test or Aggragate IS:-2386(Part-V) & LAB 200 Cum 01 No. 01 No.
impact value IS:5640
Flakiness Index IS:-2386(part-I) LAB 200 Cum 01 No. 01 No.
15 Tiles
Wall Tiles
Dimention & Surface Quality 12030 Nos IS-13630 LAB 3000 Nos 04 Nos 04 Nos
Physical Component IS-13630 LAB 3000 Nos 04 Nos 04 Nos
Chemical Component IS-13630 LAB 3000 Nos 04 Nos 04 Nos
Floor Tiles(Vetrified) 600 Nos
Dimention & Surface Quality IS-13630 LAB 3000 Nos 01 No 01 No
Physical Component IS-13630 LAB 3000 Nos 01 No 01 No
Chemical Component IS-13630 LAB 3000 Nos 01 No 01 No
Floor Tiles(Ceramic) 1500 Nos
Dimention & Surface Quality IS-13630 LAB 3000 Nos 01 No 01 No
Physical Component IS-13630 LAB 3000 Nos 01 No 01 No
Chemical Component IS-13630 LAB 3000 Nos 01 No 01 No
Floor Tiles(Ceramic-anti skid) 600 Nos
Dimention & Surface Quality IS-13630 LAB 3000 Nos 01 No 01 No
Physical Component IS-13630 LAB 3000 Nos 01 No 01 No
Chemical Component IS-13630 LAB 3000 Nos 01 No 01 No
Page 166 of 2
Sl Materials Received Unit Name of Test Type of Frequency of Required Test to be
No. Quantity ref.BIS. Test Test No. of Test Conducted
Field/Lab.
Non- Decorative 7 Shutters
End immertion Test IS-2202 LAB 26 Shutter 01 No 01 No
Knife Test IS-2202 LAB 26 Shutter 01 No 01 No
Adhesion Test IS-2202 LAB 26 Shutter 01 No 01 No
Page 167 of 2
Remarks
Result Satisfactory
Result Satisfactory
Result Satisfactory
Result Satisfactory
Result Satisfactory
Result Satisfactory
Page 168 of 2
Remarks
Page 169 of 2
Remarks
Page 170 of 2
Remarks
Page 171 of 2
Page 172 of 2
Page 173 of 2
MANDATORY TEST STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
4 Bulkage of sand.
(a) Corse sand cum 1006.73 40.00 25 28
(b) Fine Sand cum 141.92 40.00 4 5
6 Bricks.
(a) Dimension test. each 63926.00 50000.00 2 2
(b) Compressive test. each 63926.00 50000.00 2 2
(c) Water absorption. each 63926.00 50000.00 2 2
(d) Efflorence test each 63926.00 50000.00 2 2
10 Steel. (mm)
8 MT 13.06 25.00 1 1
10 MT 118.41 35.00 4 4
12 MT 15.77 35.00 1 2
16 MT 39.36 35.00 2 2
20 MT 83.75 45.00 2 3
25 MT 32.61 45.00 1 3
28.62
6.40
21.01
9.67
25.17
25.17
3.55
25.17
3.55
28.62
1.28
5.09
17.00
t Engineer
10.05 25.65 0
Analysis of Rate
sqft
Excld.GST
TEST CHECK STATEMENT
Name of work: Construction of Admin Block for CWS-III at GC, CRPF, Siliguri (West Bengal).
Total:- र 44,092,835.00
Assistant Engineer
Siliguri Central Sub-Division-V
C.P.W.D., Siliguri.
Bengal).
Remarks
1261928
8636200
3702700
6842472
10356212
6385372
37184884
Assistant Engineer
uri Central Sub-Division-V
C.P.W.D., Siliguri.
E.M.B. No. –
[ General Record Entry & Abstract ]
Certified that this E.M.B. contains 81 (Eighty one) pages serially numbered from 1 to 81.