Project ID AASML 0250 AA JAMIA MASJID AT AASML PLANT Monday, 22 April, 2019
Ref.Letter AASML-0250-CIVIL
Remarks BOQ FOR AA JAMIA MASJID AT AASML PLANT
WorkID Name WorkDescription Unit BaseQuantity Rate Amount
164 Plinth protection M2 76.58
Providing and construction of 910 mm wide plinth protection i/c excavation PCC 1:4:8 thick brick masonry, kassu filling, 100mm thick brick ballast, 50mm thick PCC 1:2:4 floor in alternate panels complete in all respects.
b) Lean concrete 1:4:8 under toe wall 4" thick
c) brick blast under floor 3" th d) Pcc 1:2:4 2" th laid in panel top surface finished with steel trowel (neero finished)
281 Shuttering Work M2 233.71
Providing and fixing of Fair Face shuttering for roof , beams, columns ,arch etc complete in all respects as per instruction by the Cleint Engineer.
66 Situ Terrazzo Flooring M2 134.20
Providing and laying in-situ terrazzo flooring total comprising 1.25"to 1.50"PCC (1:2:4) screed 3/4" thick terrazzo topping 1:2 with matrix as indicated below i/c marble powder preparation of base surface curing rubbing cutting and chemical polishing 5 mm th black jet marble devider etc complete in all respects a) With 100 % white cement
77 Pvc pipe for rain water RM 19.20
Providing and fixing best quality local made heavy duty pvc pipe 3" dia as soil stacks vent pipes rain water etc with bends tees elbows others special etc i/c pvc solution joints testing complete in all respects
81 PVC pipe 150 mm dia (Concrete covered) RM 39.63
Providing and fixing best quality local made heavy duty pvc master or equivalent as soil stacks vent pipes waste pipes rain water etc with bend tees elbow others specials etc i/c pvc solution joint testing etc complete in all respects
193 Brick ballast M2 70.00
Laying of brick ballast under floor 3 " thick as per following specifications 1) Shifting of old brick debris from new labour rooms site 2) Preparation of brick ballast for floor 3) Leveling, dressing,compation of base i/c excavation and dispose excavated and dismentled materials 4) 4)
17-12 Flooring 1:2:4 (2" thick) M2 288.37
Providing and laying 50mm thick PCC 1:2:4 floor topping in alternate panels (Without permanent division strips) as per specification or as directed by the Engineer.
206-1-1 Excavation CFT 6,805.60
(1.1) Excavation for foundaiton.trenches any type of soil up to any depth including de-watering (if required), separation suitable meterial for backfilling in foundation and any section of work in layers not exceeding 9" in depth, breaking clods, watering and compactiong 95% AASHTO, leveling, dressing & disposal of surpluses and unsuitable materials outside Mills area complete in all respects as per specification & instruction of Engineer.
206-1-2 Anti termite treatment M2 697.00
(1.2) - Providiong and applying Anti-termite Treatment in foundation bed of excavated trenches, vertical walls of excavated trenches and under floors from approved source/Manufacturer specification and providing 10 years warranty acceptable to the Employer/enginner complete in all respects & as directed by Engineer
206-1-3 Back filling CFT 18,018.00
(1.3) - Supplying stacking & filling silty sand (Kassu) of approved quality from outside sources under floors, including dressing ,watering , consolidation by ramming in layers not exceeding 6" in depth to 95% AASHTO any lead and any lift.
Printed By : civilstaff Page 1 of 4
Project ID AASML 0250 AA JAMIA MASJID AT AASML PLANT Monday, 22 April, 2019
Ref.Letter AASML-0250-CIVIL
Remarks BOQ FOR AA JAMIA MASJID AT AASML PLANT
WorkID Name WorkDescription Unit BaseQuantity Rate Amount
206-1-4 Fine Clay CFT 6,695.00
(1.4) - Supplying stacking & filling silty sand (Kassu) of approved quality from outside sources in foundation , including dressing , watering, consolidation by ramming in layers not exceeding 6" in depth to 95 % AASHTO any lead and any lift
206-1-5 Lean concrete CFT 1,402.86
( 1.5 ) - Providing and in position true to line, level, grade, lean concrete (1:4:8) using 1" dia maximum nominal size crushed stone aggregate including screening and washing of coarse and fine aggregate, compaction with mechanical means, finishing smooth, form work, scaffoling & subsequently its removal, curing, wastage, rehandling, lifting, vibrating / compaction, complete in all respects as per specification, drawing, and as directed by the Engineer.
206-1-6 DPC horizontal SFT 300.00
( 1.6 ) - Providing and laying horizontal damp proof course consisting of 2" thick cmemntconcrete (1:2:4) in situ including , cleaning of wall compacting, finishing, curing, from work and its removal etc. one coat of specified bitumen applied hot,using 30 lbs, per 100 sft, over masonary after compelte drying and cleaning the surface and one layer of 500 gauge polythene sheet (2.5 lbs/100 sft) with 3" over-laps, including heating of bitumen complete in all respects
( 1.8 ) - P/L reinforcement cement concrete using coars sand & screened graded and washed aggregate, in required shape and design, i/c forms, moulds, shuttering, lifting, compacting, curing, rendering & finishing exposed surface complete (But excluding the cost of steel reinfocement, its fabrication and placing in position etc) Reinforcement cement concrete in roof slab, beams, clolumns, lintels, girders and other structural members laid in situ or precast laid in position or prestressed members cast in situ, complete in all respects Type C (nominal mix 1:2:4)
( 1.8 ) - Reinforced cement concrete in slab of raft/strip foundation, base slab of column and retaining walls etc and other structural members other then those mentioned above not requiring form work (i.e horizontal shuttering)
206-1-10 M.s Reinforcement KG 5,433.45
( 1.9 ) - Providing and fabrication of mild steel reinfocement for cement concrete, including cutting, bending, layuing in position, making joints and fastenings, including cost of binding wire and labour charges for binding wire and labour charges for binding of steel reinfocement (also include removal of rust from bars) Deform bars (Grade 60)
206-1-11 Brick Masonary (Foundation) CFT 4,141.63
Provid and lay first class brickwork masonry in foundation in 1:4 cement sand mortar including flush pointing in same mortar curing etc as shown on the drawing and as per Specifications 230mm thick and above.
Provid and lay first class brickwork masonry in supersturcture in 1:4 cement sand mortar including scaffolding and its removal,raking out jointsand making flush or groove joints curing etc as shown on the drawing and as per Specifications 230mm thick and above..
Provid and lay first class brickwork masonry in supersturcture in 1:4 cement sand mortar including scaffolding and its removal,raking out jointsand making flush or groove joints curing etc as shown on the drawing and as per Specifications 115mm thick and above.
Printed By : civilstaff Page 2 of 4
Project ID AASML 0250 AA JAMIA MASJID AT AASML PLANT Monday, 22 April, 2019
Ref.Letter AASML-0250-CIVIL
Remarks BOQ FOR AA JAMIA MASJID AT AASML PLANT
WorkID Name WorkDescription Unit BaseQuantity Rate Amount
206-1-14 Plaster (1/2" th) SFT 4,577.50
( 1.13 ) - Providing and applying cement sand plaster of specified thickness and cement sand ratio at any height/depth including making edges, groove drip course, corners, providing & fixing of expended metal using staggered steel nails of at about of the concrete and brick faces, cutting of concrete and brick faces, cutting of concrete & brick (if required) cleaning, preparation of surface, curing, scaffolding and its subsequent removal complete in all respect conforming to the specification and instruction of the Engineer. 1/2" Thick (1:4) plaster (internal) on smooth surface of wall.
206-1-19 Tiles work (dedo/skirting) SFT 170.00
( 1.16 ) - Providing and laying Master or equal quality tiles dedo including border patti and top gola in wet areas of approved quality size, color, shade pattern / geometry as shon on drawing with floating coat of cement slurry buttered back of tiles, including jointing with cement mixed matching color pigment, washing tiles, curing, water proofing on walls as per recommentdation of SIKA / FOSOROC compete in all respect as per specifitacion, drawing or and as directed by the Engineer.
206-1-22 Marble works (floor) SFT 1,617.68
( 1.18 ) - Providing and fixing in position China Verona Spoltless marble topping 3/4" th on counter/slabs of approved quality size, shade and pattern/geometry as shown on drawing over 3/4" th average 1:3 cement sand morter over 2" th PCC 1:2:4 including grouting with matching color pigment,cutting grinding,chemical polshing complete in all respects as per drawing specified and instructed by the engineer. Dark color marble to be of Black or Green or Chocolate
206-1-24 Marble slab SFT 562.00
Providing and fixing in position China Verona Spoltless marble topping 3/4" th on counter/slabs of approved quality size, shade and pattern/geometry as shown on drawing over 3/4" th average 1:3 cement sand morter over 2" th PCC 1:2:4 including grouting with matching color pigment,cutting grinding,chemical polshing complete in all respects as per drawing specified and instructed by the engineer. Dark color marble to be of Black or Green or Chocolate
206-1-25 Wooden door SFT 65.66
( 1.21) - Providing and fixing 2" (50mm) thick solid deodar wood door shutter and deodar wood solid door frame 4" x 2.5" with inside and out side angular border 3" x 2.5" fixed along door frame including inside and out side front border 3" x 1" of approved design / pattern, geometry on door (Deodar wood without knots & eyes will be used)
206-1-26 Aluminum windows & ventilators SFT 515.00
( 1.22 ) - P/F in position at any height aluminum windows and ventilators partly fixed & open able powder coated of approved color & shade using heigh strength aluminum alloy (6063-75) Deluxe extruded section of aluminum 4" wide having minimum section th of 2mm, i/c aluminum fitting & fixture accessories, 5mm th imported plain glass of approved make, color & shade, neoprene gasket weathered mechanical joints, handle, locking arrangments, latches, hinges and other best quality hardware.
206-1-30 Water proofing M2 130.00
( 1.26 ) - Providing and laying roof insulation consisting on single layer of tiles 9" x 4.5" x 1.5" laid in (1:6) C/S mortar (1:3) laid over 4" thick earth with proper slope (including 3/4" thick mud plaster mixed with bhoosa or rice husk) over 2" thick foam spray layer of approved quality and make, on screeding with one part cement, two parts of sand and four parts of grit 2/8" over polythene sheet (single layer 500 gauge & 3" overlap) over 2 coats of approved bitumen @ 20 lbs. Per 100 sft for each coat. complete in all respect.
206-1-32 Paint (Emulsion) SFT 4,930.88
( 1.28 ) - Providing and applying at any lheight 3 coats of vinyl emulsion paint of an approved color & shade of ICI / Berger using approved rollers application on plastered surfaces of walls and ceiling beams,columns etc including rubbing & filling and preparation of surface with one coat of primer (ICI Alkali resisting coat or primer sealer in case of Berger Roblic paints) etc complete in all respects as per manufacturer specification & as directed by Engineer.
Printed By : civilstaff Page 3 of 4
Project ID AASML 0250 AA JAMIA MASJID AT AASML PLANT Monday, 22 April, 2019
Ref.Letter AASML-0250-CIVIL
Remarks BOQ FOR AA JAMIA MASJID AT AASML PLANT
WorkID Name WorkDescription Unit BaseQuantity Rate Amount
206-1-33 Pointing SFT 4,096.00
( 1.29 ) - Providing and applying deep struck jointing teep on outer surfaces matching with plant building outer look, compete in all respects & directed by the Engineer.
206-1-35 Concrete pavers SFT 824.00
( 1.31 ) - Providing, laying and finishing iterlocking concrete pavers 50mm thick over 2" sand cushion over 4" thick P.C.C (1:4:8) on compacted earth complete in all respects.
206-1-39 Almirah SFT 123.60
( 1.35 ) - Providing and finishing laminated board Almirah as shown in drawings and according to the instruction of Engineer. (For HOLLY Books)