Professional Documents
Culture Documents
A
4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 4 to port 1 and from port 4 and from port 2 to port 1 IP69K Tough coil compatibility.
1 3 3 to port 2. Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports..
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4 Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
A
60 4
B
45 3
30 2
15 1
0 0
0 2 4 6
Flow -U Sgpm (105 SU S oil@ 120°F)
A - Port 4 to port 1
B - Port 3 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-690.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
SV1-10-4/4M/4R - Solenoid Valve
4-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
A
Model Code SV1 – 10 (V) – 4 (*) – ** – **** * – 00
1 2 3 4 5 6 7 8 9
Dimensions Torque cartridge in aluminum Note: When solenoid valve Note: Use J series 23W coils
mm (inch) housing 47-54 Nm (33-46 ft lbs) is ordered as cartridge only, with this solenoid valve.
nut is included.
29,6
Cartridge Only (1.1
6) Installation Drawing
57.1
25.4 (2.25) 20.8 25.4
(1.00) (0.82) (1.00)
Ø 38,9
(1.53) 36.7 4
(1.44) 76.2 3 52.6
(3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
1
9.5 57.15
(0.38) (2.250) 2-Slots
76.2
(3.00)
25,4 (1.00) hex
0.875"– 14 Th
4
62,0
(2.44)
3
WARNING
2
Maintain 5-8 Nm
•
(4-6 ft lbs) maximum
1 torque on valve tube nut.
Ø 15,80 (0.622) Over tightening may cause
Ø 17,40 (0.685) valve failure.
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-691.A