You are on page 1of 4

Electrical Project

On

Fire Alarm & Rain Alarm

Submitted By:-

 Shubham Trivedi 101903131

 Ishaan Bajaj 101903138

 Utkarsh 101903139

 Pratyakshya Bhakuni 101903140

Under The Guidance Of

..........................

2019

School Of Electrical Engineering

Thapar University, Patiala

(Declared As Deemed To Be A Univercity u/s 3 of the UGC Act


,1956)
(1)
ACKNOWLEDGEMENT

We would like to express special thanks of gratitude to our teacher


...............who gave us the opportunity to do this amazing project on the
topic Fire Alarm & Water Alarm which helped us all in doing a lot of
research and we came to know about so many new things.

We are grateful to her for her even willingness to give us valuable advice
and direction whenever we approached her with a problem.

We thank her from the bottom of our heart for her opportunity for her
exemplary guidance,monitoring and constant encouragement throughout
the course of this project without which this project would have not been
possible.
Fire Alarm

Objective Of The Project :-

The Main Aim Of The Project Is To Make Fire Alarm And Water Alarm
Systems.

Apparatus/Equipments Used:-
Theory:-

The fire alarm working principle is based on thermistor used in the Fire
Alarm Circuit. This fire alarm circuit is used to identify and indicate an
increase in temperature beyond certain value (temperature of an
enclosed area).

The increase in temperature is indicated by Ringing Te Alarm(cooling


system can be used to bring the temperature to its normal value). Thus,
if the temperature exceeds a certain value, then the cooler or load
turns ON automatically without any monitoring system. To actuate the
relay instead of Alarm, operational alarm along with negative
coefficient thermistor can be used.

In this fire alarm mini project circuit, thermistor is used as a


temperature sensor because thermistor is very economical compared to
all other temperature sensors.But, for applications that require linear
response correction is needed as thermistors exhibit highly nonlinear
resistance vs temperature characteristics. This project can be further
enhanced to extinguish fire using fire fighting robot project.

Circuit Diagram:-

You might also like