This welding machine safety inspection checklist contains 16 items to check including the spark arrestor, insulation system, electrical connections, safety guards, lifting points, fire extinguishers, and maintenance logbooks to ensure the welding machine is in good, safe working condition. Inspectors mark each item as good, fair, poor, or not applicable and note any remarks before signing off on the inspection.
This welding machine safety inspection checklist contains 16 items to check including the spark arrestor, insulation system, electrical connections, safety guards, lifting points, fire extinguishers, and maintenance logbooks to ensure the welding machine is in good, safe working condition. Inspectors mark each item as good, fair, poor, or not applicable and note any remarks before signing off on the inspection.
This welding machine safety inspection checklist contains 16 items to check including the spark arrestor, insulation system, electrical connections, safety guards, lifting points, fire extinguishers, and maintenance logbooks to ensure the welding machine is in good, safe working condition. Inspectors mark each item as good, fair, poor, or not applicable and note any remarks before signing off on the inspection.
Rev no : 0 (Form No. 29) Project / Site Date of Inspection S/N of Equipment Contractor Location of Inspection NO DESCRIPTION GOOD FAIR POOR N/A REMARKS 1 Spark arrestor 2 Insulation system of exhaust 3 Electrical/ welding cable connection 4 ESD. system 5 Socket/ Power supply connector 6 Electric cable insulation 7 Cable grounding system 8 Ampere indicator 9 Safety guarding system 10 ELCB (30 mA) installed 11 Battery covered 12 Engine and fuel system leaks 13 Lifting point/ pad eye condition (certified) 14 Fire extinguisher ( stand by when use) 15 General condition 16 Maintenance logbook / Daily check logbook
Comments :
Inspected by CTR (HSE & Authorized Person) Acknowledged by: SPV