Professional Documents
Culture Documents
SEMESTER : 06
GROUP : N4CS2496B1
TENGKU SULAIMAN
Then, the product can save time, mini-sized and pocketable. The smaller load sizes equals less
water and detergent used which its meaning can save money. If we live in the apartment or
small house that not have enough space for home appliances such as washing machine, we
need to go to laundromat (self-service laundry shop) to wash our clothes that maybe can
waste our time and energy for others important thing to do. So, this portable washing
machine can solve our problem in addition to save our time and energy. It also can be
washing simultaneously and operates in low noise (less than 60dB) and smooth.
(2.3)Then, pen shape boiler used lithium battery where this battery will not rust and needs to
be charged around 2 to 3 hours to make the pen shape boiler fully-charged. This product is
made of lithium battery because the lithium batteries can provide up to ten times longer life
than lead-acid batteries and does not need to be maintained in term of their longevity. It is
also available in three colors which are blue, red and purple. It may not come in flashy
colors, but the product featured design properties is unique such as wireless, have chipset
where the functions of chipset is to trigger off the button when the temperature of water has
reached 100° Celcius and have top dusk cap where it prevent the individual from touching
the heating metal accidentally.
(2.4)The present state of development of pen shape boiler is …..In order to complete create the
pen shape boiler, it requires at least 8 hours to restructured the product design so that it can
captures people attention. The money that used to build pen shape boiler is approximately
RM600( 8+17+17+350+200) and to test the product to function we required RM200.
Top Dusk Cap function is to cover the heating metal from the dusk when it is carried
anywhere. Top dusk cap used low density polyethylene material because it has excellent
chemical resistance and does not dissolve at room temperature due to their crystallinity.
Heating coils are used to convert from electrical energy to heat energy and transfer the
energy through this device to water. Copper heating coils are useful to this device because
copper oxidizes over a time to form a green patina which actually protects the metal from
further corrosion. Furthermore, the switch button has two system where to switch on the
device, it need to double tap on the button and to switch off the button, it need to pressed
the button a long time until the lights turn off. The function chipset is triggered off button
when the temperature of water reached 100° Celcius. The battery is form of lithium and
needed around two to three hours to make the pen shape boiler fully-charged. Otherwise,
the proprietary charger slot has water resistance properties where the device is protected
from ingress of water.
(2.5) Besides that, the pen shape boiler also used the proprietary charger slot where it is water
resistance. Pen shape boiler has water resistance requirement where the interior design is sealed
with sticky, rubbery glue substances to create airtight seal where the functions of this airtight
seal would not allow water penetrating the pen shape boiler.
(2.6) Opportunities for the expansion of this product line is we added another system such as
system in pen shape boiler to make the drink become cold. In order to turn the make the drink
becomes cold, it need an carbon dioxide gas where the carbon dioxide gas is first needs to be
cooled and pressurized to turn it into a liquid. The liquid is then depressurized and allowed to
expand back into gas. This expansion causes a rapid temperature drop and thus turn it into cold
gas.
5.0 TECHNOLOGY DESCRIPTION (ME)
Nowadays, when we go out to market to buy any appliance, we have no idea on what type of
appliance that we should buy in order to fits our need and efficient to us. Finding the right one
may be challenging since we want the best appliance to make us feel easy and save our time.
Washing machines are no different. For more than six decades, there has been little
innovation in domestic laundry. From year to year, there have been at best, marginal increases
in the effiency of laundry systems. Therefore, with the goal of placing a ’washing machine in
every household’ we have develop a new technology called Mini Portable Washing Machine
and Dryer in which it is easy, fast and safe to be used.
The Mini Portable Washing Machine and Dryer is Automatic washing machine in which the
machine not only washes the clothes but also extracts most water out of it after washing. This
machine equipped with dryer with sensor dry-automatically turns off when your clothes are
dry. The operation is simple and the machine lid with handle for easy open. The power
consumption is only 135-200W and the energy used is less. This is top – loading design or
vertica-axis clothes washer. The clothes are place in a vertically mounted perforated basket
that is contained within a water-retaining tub, with a finned water-pumping agitator in the
center of the bottom of the basket. Clothes are loaded through the top of machine which is
covered with a hinged door.
We used alternating current motor because AC motor work with a slightly different way: they
pass alternating current through opposing pairs of magnet to create a rotating magnetic field,
which “induces” (creates) a magnetic field in the motor’s rotor, causing it to spin around.
Compared to DC, AC has ability to efficiently distribute power at low voltages. It is important
in developing technology we use low voltage value because we can cut cost and make it more
efficient to use since it is portable. The washing machine made of high quality engineering
plastics, not easy to change type and light in weight. Plastic possess very good strength and
toughness. Also good shock absorption capacity. They also have low thermal expansion of co-
efficient and posses good thermal and electrical insulating property.
6.0 MARKET ANALYSIS AND STRATEGIES (MM)
7.0 MANUFACTURING AND OPERATIONS (OM)
8.0 MANAGEMENT TEAM (AM)
8.1 Organisation
a. Key management roles in Sonic company
Organisation chart
b. Excessive overhead
There are few overhead required for executive role for our new product which is
portable pen shape boiler and in the same time want to increase the competitiveness of
SONIC Company. An excessive overhead was required is as followed:
i. Finance Specialist: To control the marketing and financial for Sonic Company.
ii. Supervisor: Supervisor will support the team organization and observe the
creativeness and quality of the team especially when their key employees have a duty
outside the office.
iii. Professional Operation Worker: Will make sure the quality check of the product
import from the factory besides control the export of the products for maintenances
and the security of the product.
8.2 Key Management Personnel
a. Career Highlights
NUR IZZATI BINTI ABD JAMAL NASIR Academic Qualification: Bachelor Degree (Hons.)
Business Management
(General Manager) Course Attended:
i. Entrepreneurship Course
ii. Business Seminar with Dr. Azizan
Skills:
i. Fluent in Bahasa Melayu, English
and Japanese Language
ii. Good in Leadership
iii. Familiar with Microsoft Office,
Power Point and Excel
Experience:
i. Financial Manager at
Pharmaceutical Sdn. Bhd
ii. Marketing Manager at Bank
Islam
Skills:
i. Fluent in Bahasa Melayu, English
and Arabic Language
ii. Good in Leadership
iii. Strong problem solving and
critical thinking
iv. Familiar with Microsoft Office,
Power Point and Excel
v. Familiar with budget planning
and enforcement, human
resources and customer service
procedures.
Experience:
i. Administrative Manager at
Subway Sdn. Bhd
ii. Administrative Manager at Jack
& Jill Sdn. Bhd
NUR FADILAHAMIRA BINTI MAHMOD Academic Qualification: Bachelor Degree (Hons.)
Finance and Accounting
& Course Attended:
i. Entrepreneurship Course
NUR AIMI IZZATI BINTI RANI
Skills:
(Financial Manager) i. Fluent in Bahasa Melayu, English
and Mandarin Language
ii. General Knowledge on Financial
iii. Skillful in Budgeting of Product
Experience:
i. Have a business experience
WAN ABIR ASYRAF BIN WAN RAHIM Academic Qualification: Bachelor Degree (Hons.)
& Chemical Engineering and Process
Course Attended:
MUHAMMAD AKMAL BIN MOHAMED i. Entrepreneurship Course
BEDRULZAMAN ii. Operational Management with
SME Corp.
(Operational Manager) iii. Entrepreneurship with MEDEC
Skills:
i. Fluent in Bahasa Melayu, English
and Mandarin Language
ii. Excellent in manage the
operation work
Experience:
iv. Human Resource
Manager(LHDN)
Experience:
ii. Marketing Manager (Jusco)
b. Duties and Responsibilities
NUR IZZATI BINTI ABD JAMAL NASIR Overseeing daily business operations.
Developing and implementing growth
(General Manager) strategies for company.
Training low-level managers and staff.
Evaluating performance and productivity.
WAN ABIR ASYRAF BIN WAN RAHIM Monitoring the working procedure.
& Ensure the maintenance of quality product
MUHAMMAD AKMAL BIN MOHAMED and quality control.
BEDRULZAMAN Supervise the assembling process of
portable pen shape boiler.
(Operational Manager) Monitor the request stock to be purchased.
Ensure all equipment and materials in
good quality.
(General Manager)
Nik Puteri Zakirah Binti RM1,750 30% RM20,000
Nik Othman
(Administrative
Manager)
Nur Fadilahamira Binti RM1,000 10% RM15,000
Mahmod
&
Nur Aimi Izzati Binti
Rani
(Financial Manager)
(Operational Manager)
Nur Asyikin Binti RM1,000 10% RM15,000
Hashimi
(Marketing Manager)
8.4 Supporting Professional Advisor and Services
9.0 FINANCIAL ESTIMATION (FM)
10.0 PROJECT MILESTONES (AM)
11.0 CONCLUSIONS
12.0 APPENDICES
13.0 PROJECT PAPER(BLUEPRINT)RUBRIC