Professional Documents
Culture Documents
T 764 PG 209-212 PDF
T 764 PG 209-212 PDF
Maximum extrusion gap Figures show the maximum permissible gap all on one
side using minimum rod Ø and maximum clearance Ø. Refer to
764
Housing Design section
L1 C Design
The Hallite 764 is a compact seal for light to
medium duty hydraulic cylinders. It is a double
20° 30°
acting piston seal with single acting capabilities.
r1 This makes it an excellent choice for double
acting applications where minimal dynamic
S
C
leakage is required.
The Hallite 764 comprises of a tough
Ød1 ØD1 elastomeric face that is pre-loaded by an O
ring. The housing width allows a narrow width
piston to be used, but it is recommended that
an adequate bearing is mounted on one or
both sides of the seal.
Housing dimensions for use with Hallite 87 and
Features 506 bearing strip are given in the installation
• Double acting seal with single acting details. For further details on bearing strip
capabilities grooves, please refer to the appropriate data
• Excellent wear resistance sheets.
• High extrusion resistance makes it ideal for
use with remote wear rings such as the Hallite NB: Part numbers suffixed by ”‡” indicate housing
506 or 87 sizes to meet ISO 7425-1.
•Advanced face geometry provides enhanced
dynamic and static sealing For full details and availability please contact
•More tolerant to dirt and contamination than your local Hallite Sales office.
common PTFE faces
•Rapid recovery after assembly, no resizing
required
•ISO 7425 housings
209
Piston Seals metric
764
L1 C
20° 30°
r1
S
C
Ød1 ØD1
210
Piston seals inch
764
L1 C
20° 30°
r1
S
C
Ød1 ØD1
211
Notes
212