Professional Documents
Culture Documents
Z H
H
15°
Z
C
15° C
bar
90 Duro
rating due to the harder compound. 1000 70
800 55
Temperature Range -30°C ~ 205°C 600 42
400
70 Duro 28
Transeals also stocks EPDM, Silicone and many other
300 21
O-ring compounds. These materials are not generally
200 14
used in hydraulic applications.
100 7
Ordering 0 0.25mm 0.50mm 0.75mm
0.010" 0.020" 0.030"
• To order O-rings specify the size (metric) or Dash No.
Extrusion Gap, G
(imperial) and the required material.
• By convention O-rings are specified by the Inside Back Up Washers
Diameter (ID) then the Cross Section (CS). • Back Up Washers (BUWs) can be incorporated to
• For more information on O-rings refer to increase extrusion resistance of O-rings. Refer to the
Transeals O-ring Handbook or our website at Back Up Washers section after the O-ring size listings
www.transeals.com.au for more information.
CS
OD ID
21 August 2003
H A
FaceSeal Triangular
0.070 1/16 0.060 0.058 0.054 0.052 0.092 0.161 0.240 0.095 0.039
0.103 3/32 0.092 0.088 0.082 0.080 0.133 0.181 0.256 0.138 0.059
0.139 1/8 0.126 0.121 0.114 0.106 0.179 0.216 0.291 0.189 0.079
0.210 3/16 0191 0.185 0.174 0.162 0.273 0.300 0.401 0.281 0.118
0.275 1/4 0.248 0.240 0.227 0.214 0.358 0.395 0.531 0.370 0.157
E = English J = Japanese This size list has been base on 4 international metric O-ring standards. Due to the overwhelming number
21 August 2003
of sizes in these standards we have editied out approximately 2,000 sizes. For an expanded size listing,
G = German S = Swedish please refer to our website at www.transeals.com.au
E = English J = Japanese This size list has been base on 4 international metric O-ring standards. Due to the overwhelming number
21 August 2003
of sizes in these standards we have editied out approximately 2,000 sizes. For an expanded size listing,
G = German S = Swedish please refer to our website at www.transeals.com.au
E = English J = Japanese This size list has been base on 4 international metric O-ring standards. Due to the overwhelming number
21 August 2003
of sizes in these standards we have editied out approximately 2,000 sizes. For an expanded size listing,
G = German S = Swedish please refer to our website at www.transeals.com.au
E = English J = Japanese This size list has been base on 4 international metric O-ring standards. Due to the overwhelming number
21 August 2003
of sizes in these standards we have editied out approximately 2,000 sizes. For an expanded size listing,
G = German S = Swedish please refer to our website at www.transeals.com.au
105 0.143 0.103 5/32 11/32 3/32 159 4.987 0.103 5 5.3/16 3/32
235 3.109 0.139 3.1/8 3.3/8 1/8 313 0.662 0.210 11/16 1.1/16 3/16
367 7.475 0.210 7.1/2 7.7/8 3/16 435 5.725 0.275 5.3/4 6.1/4 1/4