Professional Documents
Culture Documents
Boden DB Stutz s4 - en PDF
Boden DB Stutz s4 - en PDF
Product characteristics
Unique flexibility
High loadability
Easy installation
High corrosion protection
Made in Germany
Zinc-whisker free
Can be combined with stringers
type RO, RL and RM
schematic representation
Product description
The system floor pedestal type S4 from galvanised steel in combination with gaskets and optionally stringers type RO, RL and RM is used
as substructure with raised access floor systems. The system floor pedestals are entirely made by Lindner, from the design to the
production including galvanisation.
Application
commercialised, distributed nor presented to other individuals for commercial purposes without our approval.
Subject to change without notice. This document is our intellectual property. It may neither be reproduced,
The system floor pedestal type S4 creates the cavity for taking up installations. The system floor pedestal type S4 offers exceptional
flexibility by its high loadability and the high adjustment range. The pedestals are infinitely adjustable on height and can therefore take up
irregularities of the subfloor.
Thickness 2.5 mm
Tube (550 - 1000 mm) ø 25 x 2.5 mm
Tube (1050 - 1100 mm) ø 26 x 3.0 mm
Load class
EN 12825 6 (6 kN)
Ultimate load centric ≥ 24 kN
Ultimate load eccentric ≥ 12 kN
Reaction to fire performance
EN 13501-1 A1 (non-combustible)
Corrosion protection
Corrosion protection class zinc-galvanised
Salt spray fog test 72 hours
Lindner AG, Bahnhofstraße 29, 94424 Arnstorf / Germany, Tel. +49(0)8723/20-36 82, Fax +49(0)8723/20-28 30,
floorsystems@Lindner-Group.com, www.Lindner-Group.com Page 1 of 1 Rev. 01, 28.11.2016