Professional Documents
Culture Documents
M101 PDF
M101 PDF
92503016096 revB
M101 PHASE 90
DESCRIPTION POWER DIRECTIONS SPECIFICATIONS
• Add’s shimmery velocity to The MXR Phase 90 is powered • Run a cable from your guitar Input Impedance 1 MΩ
lead licks and a thick by one 9-volt battery (remove to the Phase 90’s INPUT jack Output Impedance 10 kΩ
swoosh to chords bottom plate to install), a 9-volt and run another cable from the Nominal Intput Level -20 dBV
AC Adapter such as the Dunlop Phase 90’s OUTPUT jack to Nominal Output Level -20 dBV
• Works well with bass, keyboards
ECB003/ECB003EU or a DC Brick™ your amplifier.
and even vocals Noise Floor* -96 dBV
power supply. • Start with the SPEED control
• True bypass at 12 o’clock. Bypass True Hardwire
• Turn the effect on by depressing Current Draw 5 mA
the footswitch. Power Supply 9 volts DC
• Rotate the SPEED knob *A-weighted
clockwise for a faster phase
effect or counterclockwise
CONTROLS for a slower phase effect.
SPEED knob controls
overall effect rate
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)
SAMPLE SETTINGS