Professional Documents
Culture Documents
ASME SA-105
SA-350 Grade LF2
EXOTIC ALLOY
Chemical Composition
Chemical Composition (wt%) limits of ASME
SA-105/SA-350 Grade LF2 steel*
Element SA-105/SA-350LF2
Carbon 0.30
Manganese 0.60-1.05
Silicon 0.15-0.30
Copper 0.40
Chromium 0.30
Nickel 0.40
Molybdenum 0.12
Description Phosphorus 0.035
This grade is used primarily for steel piping components for low temperature, Sulfur 0.040
ambient and higher temperature service as required by ASME specification Vanadium 0.08
SA-105 (Specification for Carbon Steel Forgings for Piping Applications) and Columbium 0.02
ASME Specification SA-350 (Specification for Carbon and Low-Alloy Steel * Maximum, unless range is indicated
Mechanical Properties
Data are typical, are provided for informational purposes, and should not be construed as maximum Mechanical property requirements for annealed
or minimum values for specification or for final design, or for a particular use or application. The
data may be revised anytime without notice. We make no representation or warranty as to its
bar product as specified in ASTM
accuracy and assume no duty to update. Actual data on any particular product or material may vary Property SA-105/SA-350 Grade LF2
from those shown herein. © 2015 Double Eagle Alloys Inc. All rights reserved.
Yield Strength, min. (ksi) 36
Tensile Strength, min. (ksi) 70-95
Elongation, min. (%) 22
Physical Properties
Physical properties for SA-105/SA-350 Grade
LF2 steel components
Standards
Typical standards for SA-105/SA-350 LF2 steel
SA-105/SA-350 LF2
Double Eagle Alloys ASME SA-105
1660 N 168th E Avenue ASME SA-350 Grade LF2
Tulsa, OK 74116
Phone: (918) 254-1100
Fax: (918) 254-1101
w w w. d o u b l e e a g l e a l l o y s . c o m