Professional Documents
Culture Documents
Rev 1 Bes
Rev 1 Bes
Name: Marks
Group Code: Date: /50
Topic : Revision 1
SECTION A: 10 marks
Answer ALL questions in this section. Write your answer in the paper provided.
Each question carries ONE (1) mark.
No. Questions Mark
A. Alloying
2 1
B. Painting
C. Rusting
D. Platting
A. No pressure
B. Heat
4 C. Less pressure 1
D. More pressure
1
Revision 1, Basic Engineering Science
EES04/N/WLD/04, EES04/N/MCH/03 & EES04/N/IEM/03
Session 2018/2020, Semester 1
A. Kelvin
5 B. Ohm 1
C. Volt
D. Ampere
What is the acceleration of the particle, with reference to the graph given below?
A. zero
6 1
B. uniform
C. non-uniform
D. negative
𝐸𝑛𝑒𝑟𝑔𝑦 𝐼𝑛𝑝𝑢𝑡
A. 𝜀 = × 100%
𝑇𝑜𝑡𝑎𝑙 𝐸𝑛𝑒𝑔𝑦 𝑂𝑢𝑡𝑝𝑢𝑡
𝐸𝑛𝑒𝑟𝑔𝑦 𝑂𝑢𝑡𝑝𝑢𝑡
7 B. 𝜀 = × 100% 1
𝑇𝑜𝑡𝑎𝑙 𝐸𝑛𝑒𝑔𝑦 𝐼𝑛𝑝𝑢𝑡
𝐸𝑛𝑒𝑟𝑔𝑦 𝑊𝑎𝑠𝑡𝑒𝑑
C. 𝜀 = × 100%
𝑇𝑜𝑡𝑎𝑙 𝐸𝑛𝑒𝑔𝑦 𝑂𝑢𝑡𝑝𝑢𝑡
𝐸𝑛𝑒𝑟𝑔𝑦 𝑊𝑎𝑠𝑡𝑒𝑑
D. 𝜀 = 𝑇𝑜𝑡𝑎𝑙 𝐸𝑛𝑒𝑔𝑦 𝐼𝑛𝑝𝑢𝑡
× 100%
A. water
8 1
A. heat
B. electric charge
C. air
𝐸
A. 𝑃 = 𝑡
9 B. 𝑉 = 𝐼𝑅 1
C. 𝐹 = 𝑚𝑎
𝑉
D. 𝑅 = 𝐼
2
Revision 1, Basic Engineering Science
EES04/N/WLD/04, EES04/N/MCH/03 & EES04/N/IEM/03
Session 2018/2020, Semester 1
10 A. geographical south 1
B. geographical north
C. geographical east
D. geographical west
End of Section A
SECTION B: 10 marks
Answer ALL questions in this section. Fill in the blanks with the correct answer.
Write your answer in the paper provided. Each answer can only be used once. Each
question carries ONE (1) mark.
The process of copper reacts with water and oxygen in the air producing copper
11 1
oxide is called __________________.
3
Revision 1, Basic Engineering Science
EES04/N/WLD/04, EES04/N/MCH/03 & EES04/N/IEM/03
Session 2018/2020, Semester 1
18 1
___________ is one example of a magnetic materials.
End of Section B
4
Revision 1, Basic Engineering Science
EES04/N/WLD/04, EES04/N/MCH/03 & EES04/N/IEM/03
Session 2018/2020, Semester 1
SECTION C: 30 marks
Answer ALL questions in this section. Write your answer in the paper provided.
Each mark is allocated in the questions respectively.
No. Questions Mark
Draw and label the centre of gravity as g for the following object.
23 3
Point A, B and C have the same size of hole. Which one will exert the least
pressure and give your reason.
24 A
5
Revision 1, Basic Engineering Science
EES04/N/WLD/04, EES04/N/MCH/03 & EES04/N/IEM/03
Session 2018/2020, Semester 1
The diagram below shows the velocity of a particle over a period of 4 seconds.
Calculate the acceleration of the particle.
25 3
a) i) What is current? 1
ii) Calculate the current passing through a 4 Ω resistor given that the
potential difference applied across the resistor is 6 V. 3
b) What is the voltage across the 5 Ω resistor given that the current flowing
27 in the circuit is 2 A? 3
5Ω
28 A kettle is rated 240 V and 1500 W. Calculate the current flowing across the lamp. 3
End of Section C
End of Question Paper