Professional Documents
Culture Documents
Document ID - 1880327 PDF
Document ID - 1880327 PDF
2012 Chevrolet Cruze | Cruze US/Canada Service Manual 2817 | | Automatic Transmission - 6T30/6T40/6T45/6T50 |
Transmission Diagnostic Information and Procedures |
Document ID: 1880327
1. Verify the conditions listed below do not exist. Carefully inspect the control solenoid valve assembly connectors and pins (1, 2, 4, 6) for
the condition. Repair or replace as necessary.
Damage
Bent pins
Debris
Broken retaining tab
Contamination
2. Verify there is no metallic debris inside the connectors near the terminal pins. Clean as necessary.
3. Verify the control solenoid valve assembly solenoid leads
© 2019 (3) do
General not have
Motors. contamination
All rights reserved. or metallic debris. Clean as necessary.
https://gsi.ext.gm.com/gsi/showDoc.do?pubCellSyskey=190801&from=sm&cellId=164536&docSyskey=1880327&laborOpCode=&pubObjSyskey=4224377 1/2
24/7/2019 Document ID: 1880327
4. Verify the resistance between the leads of each solenoid is within the range in the table below, with the solenoids at room temperature.
If the resistance of any solenoid is not within range, replace the Control Valve Body Assembly.
5. Inspect the 2 control solenoid valve assembly filter plate retaining tabs (5) for cracks and ensure proper tension when filter plate is
attached.
Solenoid Resistance
https://gsi.ext.gm.com/gsi/showDoc.do?pubCellSyskey=190801&from=sm&cellId=164536&docSyskey=1880327&laborOpCode=&pubObjSyskey=4224377 2/2