Professional Documents
Culture Documents
Hempel 35560 PDF
Hempel 35560 PDF
10
HEMPADUR 35560 is approved by the Water Research Centre (WRAS), Great Britain,
according to BS 6920 for potable water up to 23°C/73°F.
It is also covered by the Norwegian Health Authorities
(Folkehelseinstituttet), Norway, for use in tanks for potable water
offshore according to system 3A in NORSOK M-501, revision 5.
Application properties
HEMPADUR 35560 can easily be applied with single feed airless spray coating will need 12 days curing at 20°C/68°F to obtain complete curing,
45:1 or 60:1, without the need for any thinning or heating. HEMPADUR before cleaning and being put into service.
35560 can be applied and cure down to 10°C/50°F. When mixed
(mixing ratio A:B = 7:2 by volume) the product has a 1.5 hour potlife
at 20°C/68°F. PRODUCT FEATURES AND BENEFITS
• Certified and approved for potable water use
The normal application range for HEMPADUR 35560 is 200-400 µm/ • 100% Solvent-free and Benzyl alcohol free
8-16 mils dry film thickness (dft) and a typical paint specification is 2 • Resistance against bacterial growth
coats of 200 µm dft. First coat is light red / shade 50900 and second • Easy cleaning
coat is cream / shade 20320. Application is typically done by stripe • Excellent corrosion resistance
coating “blind” areas, then apply first coat, stripe coating of hand welds, • Application friendly
edges, back sides, corners etc., before application of the second coat. At • Long overcoating window
20°C/68°F recoating time between first and second coat is 24 hours. • Light colour for easy inspection
After full application of HEMPADUR 35560 in a potable water tank, the
09/2007
Hempel A/S
Lundtoftevej 150
DK-2800 Kgs. Lyngby
Denmark
Phone: +45 45 93 38 00
Fax: +45 45 88 55 18
E-mail: protective@dk.hempel.com
E-mail: marine@dk.hempel.com
www.hempel.com