Professional Documents
Culture Documents
in nutrunner attachments
Jemms-cascade is pleased to provide quality
attachments to the following power tool
manufacturers or their distributors:
• Aimco • CP • Makita
- Acradyne - Desoutter • Sioux
- Uryu - Georges Renault
- Techmotive • Stanley
• American Assembly
• Atlas-Copco • Cooper
- Cleco
• Bosch - Rotor
- Production
- Rexroth • Ingersoll Rand
*Our Attachments are manufactured to perform with pneumatic, electric and cordless power tools.
Based in Troy, Michigan since 1988, we provide solid solutions to the automotive,
aerospace, agricultural and general industries worldwide.
Internationally distributed by
• Major power tool manufacturers • Fastening system experts • Jemms-Cascade, Inc.
or their distributors
exclusive
We manufacture the only tooling of this type independently bench tested to 250,000+ cycles
by power tool manufacturers and L.T.U. (Ford Certification).
Jemms has solved these problems by manufacturing precision units that provide:
1. 250,000 cycle capability* 6. Responsive turn around time 9. Plant support with technical information
2. Most consistent torque repeatability 7. Mount to the power tool of your and replacement parts service
standard Attachments
W/ EXTENDED SOCKET
Multi-Spindle
Wheel lugs, u-bolts, or multiple fastener applications for run down.
socket options
- Bit Holder
- Socket Extensions
- Magnetic Sockets Surface Drive 6 Point Hex 12 Point Hex
Jemms configurations consistently provide high torque outputs with minimal footprints. With over two decades
of experience and performance our designs accommodate the most unique applications.
• Components are manufactured with high strength materials and precision machining.
• Motor adapters are included with each Attachment, allowing for mounting on a 360° axis.
Various mounting adapters are available, see page 29.
• Grease fittings are included on all our designs allowing for easy lubrication.
• Custom designs are available that multiply torque and change the direction of rotation.
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
Hold & Drives are commonly used to secure shock absorbers, alternator pulleys, truck frames,
and ball joints when a fastener needs to be retained and secured on the same side.
Jemms offers several designs to work with standard pneumatic and electric nutrunners.
Our low profile alternative provides maximum tool capability at 1/3 the height of
standard Hold & Drives with the safety of an enclosed hold shaft.
• Parts manufactured with high strength materials and precise machining.
• We use precision bearings to maximize efficiency and maintain torque repeatability.
• Enclosed moving components increase stability and eliminate pinch points.
• Angle head adapters are included with each Attachment. They allow for mounting on a 360° axis.
1.250" STD.
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
* Custom travel designs are available upon request. Please specify socket size when ordering. Flush socket designs are also available.
tube-nut attachments
Torque Capability Max Socket Size A2 B C D B2 T.O.
Base Model
FT./LB. N.M. IN MM IN MM IN MM IN MM IN MM IN MM IN MM
TN2 18 25 5/8 17 0.500 13 1.750 44 0.650 17 1.580 40 1.500 38 0.350 9
TN2X2 (See TN2) 3.797 96 1.500 38 0.350 9
TN79 18 25 1/2 13 0.563 14 1.750 44 0.543 14 2.156 55 1.375 35 0.375 10
TN71 22 30 3/4 19 0.563 14 2.000 51 0.743 19 1.561 40 1.640 42 0.500 13
TN71X2 (See TN71) 3.989 101 1.640 42 0.500 13
TN72X2 22 30 9/16 14 0.625 16 1.500 38 0.549 14 2.810 71 1.160 29 0.330 8
TN3 26 35 3/4 18 0.500 13 2.000 51 0.750 19 1.800 46 1.670 42 0.410 10
TN3X2 (See TN3) 4.300 109 1.670 42 0.410 10
TN77 29 40 7/8 23 0.563 14 2.400 61 0.868 22 1.649 42 2.300 58 0.562 14
TN77X2 (See TN77) 4.649 118 2.300 58 0.562 14
TN9 29 40 3/4 20 0.625 16 1.750 44 0.740 19 1.687 43 1.730 44 0.400 10
TN9X2 (See TN9) 4.254 108 1.730 44 0.400 10
TN4 41 55 1-3/16 30 0.563 14 2.500 64 1.025 26 2.505 64 2.500 64 0.625 16
TN4X2 (See TN4) 6.219 158 2.500 64 0.625 16
TN19 92 125 1-1/2 38 0.750 19 4.000 102 1.325 34 2.615 66 3.375 86 1.100 28
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
When accessing fasteners in deep and confined areas, we recommend using an Inline Attachment.
Angled Attachments are used for ergonomically accessing restricted fasteners. Common automotive applications
are accessing brakelines in the wheel wells and door installations.
Both designs fit directly to the power tool without the angle head.
• Adapters are provided to easily adjust the output gear location to the tool trigger.
• Designs are available that multiply torque and change the direction of rotation
that allows use off the top or bottom of the Attachment.
• Grease fittings are located on all our designs allowing for easy lubrication.
• Casings are contoured to minimize tool weight and prevent paint mutilation.
Jemms Attachments can be engineered in any configuration and fit on all major power tools. Numerous variations are available.
H
B B2
A
E G
D C F
inline standard
H attachments
Max Torque Hex Size A B B2 C D E F G H
Part # Output Max** A
FT./LB. N.M. IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
6B24/327/833/34312-INL 13 18 0.472 12 0.551 14.0 1.870 47.5 0.984 25.0 0.470 11.9 4.417 112.2 2.429 61.7 4.355 110.6 0.282 7.2 0.682 17.3
G
4B2/40-26-23750-INL 22 30 0.512 13 0.629 16.0 1.870 47.5 1.110 28.2 0.555 14.1 3.499 88.9 2.499 63.5 3.554 90.3 0.465 11.8 0.638 16.2
4B84/624/2524/22312-INL 22 30 0.551 14
F
0.629 16.0 1.870 47.5 1.126 28.6 0.563 14.3 3.222 81.8 2.287 58.1 3.284 83.4 0.259 6.6 0.588 14.9
4B016/1724/25375-INL 27 36 0.827 21 0.688 17.5 1.870 47.5 1.526 38.8 0.700 17.8 3.600 91.4 2.760 70.1 3.798 96.5 0.221 5.6 0.588 14.9
6B85/621/229/3312-INL 26 35 0.512 13 0.567 14.4 1.870 47.5 1.126 28.6 0.563 14.3 5.443 138.3 4.492 114.1 5.474 139.0 0.289 7.3 0.620 15.7
5B02/321/22625-INL 52 70 0.630 16 1.000 25.4 1.500 38.1 1.500 38.1 0.655 16.6 4.175 106.0 3.425 87.0 4.342 110.3 0.185 4.7 0.620 15.7
4B2/46438-INL 75 102 0.748 19 0.688 17.5 2.720 69.1 1.800 45.7 0.900 22.9 4.458 113.2 3.075 78.1 4.375 111.2 0.406 10.3 1.079 27.4
4B2/40-26-23750-INL 280 380 1.125 29 1.127 28.6 3.276 83.2 2.250 57.2 1.116 28.3 5.999 152.4 3.401 86.4 5.630 143.0 0.460 11.7 1.496 B238.0
B T.0.
7B8/107-4625-INL 332 450 1.125 29 1.437 36.5 3.126 79.4 2.500 63.5 1.250 31.8 12.688 322.3 9.501 241.3 9.314 236.6 0.518 13.2 1.783 45.3
C
D
E
B T.0. B2 A2
G
C F
D
E
TNR2-INL 26 35 0.669 17 0.570 14.5 1.750 44.5 1.380 35.1 0.690 17.5 2.464 62.6 1.764 44.8 2.774 70.5 0.420 10.7 0.600 15.2 0.400 10
TN77-INL 26 35 0.945 24 0.431 10.9 2.400 61.0 2.000 50.8 0.897 22.8 2.805 71.2 1.565 39.8 3.078 78.2 0.581 14.8 0.745 18.9 0.442 11
TN9-INL 29 40 0.827 21 0.676 17.2 1.750 44.5 1.750 44.5 0.740 18.8 2.679 68.0 1.439 36.6 2.981 75.7 0.270 6.9 0.709 18.0 0.400 10
TN65-INL 41 55 0.866 22 0.601 15.3 2.718 69.0 1.962 49.8 0.843 21.4 3.503 89.0 1.982 50.4 3.314 84.2 0.643 16.3 0.736 18.7 0.708 18
TN14-INL 44 60 0.866 22 0.601 15.3 3.000 76.2 2.388 60.7 1.133 28.8 3.658 92.9 2.158 54.8 4.041 102.6 0.643 16.3 0.745 18.9 0.708 18
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
D C H
B B2 A2
G
F
E
20° standard attachments
Max Torque Hex Size A2 B B2 C D E F G H
Part # Output HMax** IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
FT./LB. N.M. IN MM
5B85/6312-20° 22 35 0.512 13 0.552 14.0 1.700 43.2 1.111 28.2 0.555 14.1 3.525 89.5 2.934 74.5 3.705 94.1 0.188 4.8 1.329 33.8
6B03/40/217/8375-20° 22 39 0.551 14 0.688 17.5 1.750 44.5 1.106 28.1 0.555 14.1 5.000 127.0 4.125 104.8 5.175 131.4 0.197 5.0 1.328 33.7
G
5B022/2323/2428/296/7312-20° 24 35 0.748 F
19 0.625 15.9 1.750 44.5 1.418 36.0 0.680 17.3 4.800 121.9 3.402 86.4 5.040 128.0 0.188 4.8 1.226 31.1
4B024/25-25/26-6/7375-20° 27 39 0.827 21 0.688 17.5 1.750 44.5 1.526 38.8 0.730 18.5 3.600 91.4 2.454 62.3 4.330 110.0 0.125 3.2 1.226 31.1
4B4/81/29/0375-20° 37 50 0.945 24 0.750 19.1 1.750 44.5 1.750 44.5 0.835 21.2 4.000 101.6 2.828 71.8 4.460 113.3 0.132 3.4 1.350 34.3
C
D
E
B T.0. B2 A2
G
C F
D
E
A2
Max Torque Hex Size A2 B B2 C D E F G H T.O.
Part # Output Max**
FT./LB. N.M. IN MM G IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
F
TN79-20° 22 30 0.512 13 0.626 15.9 1.750 44.50 1.186 30.10 0.593 15.10 2.200 54.80 1.351 34.30 2.054 52.20 0.741 18.80 1.342 34.10 0.375 10.00
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
Our designs can be built to suit various configurations using gear-driven technology. Jemms gear-driven concept
provides consistent rotation while maintaining a low output torque eliminating cross thread damage.
• Jemms manufactures the Multi-Spindle using lightweight, high strength materials, providing extended tool life.
• Powertool adapters are created and provided to suit pneumatic and cordless applications.
• Specialty designs include sliding spindles and can be used for fastener removal.
multi-spindle
Bolt Circle
Part # Spindles Weight lbs.
IN MM
3765 4.500 114.3 5 1.4
3506 3.938 100.0 5 1.3
4600 4.331 110.0 5 1.3
4676 4.724 120.0 5 1.8
4875 4.250 108.0 4 1.3
4178 4.528 115.0 6 1.7
4049 6.000 152.4 8 2.5
‡ Numerous variations are available. If required unit is not listed, contact our plant with your
application requirements. Lubricate once per shift. Check cover plate screws once per shift.
Torque in reverse not to exceed torque in forward.
Intelligent Designs
Standard configurations can be retrofitted
for various applications.
Jemms Attachments can be engineered in any configuration and fit on all major power tools. Numerous variations are available.
fixtured offsets
Max Torque A A2 B B2 D
Sq. Dr.
Model # Output Ratio Stroke
up to
FT./LB. N.M. IN MM IN MM IN MM IN MM IN MM
2B67/81250_ _ 80 108 2.000 50.8 2.783 70.7 2.000 50.8 1.482 37.6 1.125 28.6 0.741 1" 1/2
3B2/46-8625_ _ 184 250 0.937 23.8 6.802 172.8 2.000 50.8 2.188 55.6 3.001 76.2 1.000 1" 3/4
3B2/49-221250_ _ 258 350 1.125 28.6 8.166 207.4 2.312 58.7 2.312 58.7 3.375 85.7 1.156 2" 3/4
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Where the size, power or availability of the motor is a factor, our custom angle heads
should be considered. They are built using our established spiral bevel gear designs.
Benefits include:
• Specialty gear ratios compliment your standard product by achieving
specific torques and RPM ranges.
• The use of our spiral bevel gears provide excellent smoothness
and load carrying capability.
A
• Adapters are provided to fit directly to your tool body.
C
• Precision bearings maximize efficiency and maintain gear alignment.
• Components are manufactured with high strength materials and
precision machining.
• Multiple designs are available, including Flush Socket Heads.
SQ. DRIVE
Angle Heads
Max Torque Output A = Height C
Model # Angle Ratio Standard Sq.
FT./LB. N.M. IN MM IN MM
RA-1003 11 15 1.680 43 0.670 17 90 1.58:1 3/8
RA-1011 15 20 1.500 38 0.650 17 110 (20) 1.21:1 1/4, 3/8
RA-1004 37 50 1.894 48 0.750 19 110 (20) 1.56:1 3/8, 1/2
RA-1005 66 90 1.894 48 0.750 19 90 1.75:1 1/2
RA-1007 66 90 1.932 49 1.031 26 90 2.375:1 1/2
RA-1006 81 110 2.841 72 1.625 41 90 2.09:1 1/2
RA-1009 406 550 3.396 86 1.663 42 90 2.2:1 3/4, 1"
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
Easy Installation
Allows socket replacement without
removing the sleeve.
Many people have suffered serious injuries to their gloved hands due to the pinch point problem that exists on most
nutrunner tools at the sockets. Jemms-Cascade Inc. has a pinch-point protector which provides safety, efficiency and
smooth running to your nutrunner applications. Our Safety Sleeve is modeled after our patented Whipless Extensions.
Jemms Attachments can be engineered in any configuration and fit on all major power tools. Numerous variations are available.
Design Integrity
Approved safety products for
automotive manufacturers and
their tier suppliers.
Jemms Whipless Extensions will reduce vibrations in excess of 90% on power tool applications.
Our drive shafts are straightened and ground to fit precision bearings. The bearing support
sleeve includes the power tool adapter to suit any power tool.
• The reduction of vibration maximizes efficiency and extends the power tool life.
• Product quality is improved with consistent torque output and helps to prevent cross threading fasteners.
• Jemms ergonomic design is manufactured of premium materials providing a lightweight, long lasting tool addition.
• Extensions are available for 1/4” through 1-1/2” squares and 2”- 32” overall length to fit the power tool of your choice.
Jemms Attachments can be engineered in any configuration and fit on all major power tools. Numerous variations are available.
Versatile Designs
Our modular assemblies allow us
to offer a standard attachment
with unlimited options to suit your
unique application.
Installation and Drilling Attachments are commonly used in the aerospace industry
for accessing restricted fasteners and providing access to hard to reach areas.
• Jemms Hold & Drive (Hi-Loc) Attachments have no outside moving parts, use calibrated pre-load springs and are assembled
with minimal components.
• Our Attachments are manufactured of high strength materials with precision machining. This provides maximum
performance with minimal thickness and radius dimensions.
• Options for output gears are available for (Hi-Shear, threaded, spline and standard hex applications.)
• To simplify your operation, our indexing collar provides a quick change mechanism uniquely
designed to lock-in position while ergonomically contoured for easy operation.
• “Change and Go” Jemms unique single point adapter allows your operator to quickly switch
Attachments using one motor, reducing the time and tools required to secure various
fasteners in each station.
Jemms Attachments can be engineered in any configuration and fit on all major power tools. Numerous variations are available.
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
21 www.jemms-cascade.com Phone: 248.526.8100 Fax: 248.526.0019 20
Profile Options Extension
D C
0FLU = Flush
0125 = 1/8
20° (Indexing)
B B2 0250 = 1/4
0375 = 3/8
0500 = 1/2
RAI (Indexing), 0750 = 3/4
CGA (Change & Go)
E OPTIONAL PROFILE 0875 = 7/8
0100 = 1.000
output
PAI (Indexing)
HD = Hold & Drive
A A2 SA = Standard
34822-32165-20I-SA-0500-_ _
Installation Series
To 140 In. lb.
Max Torque Hex Size A A2 B2 C D
Sq. Dr.
Part # Output Max**
Up To
IN./LB. N.M. IN MM IN MM IN MM IN MM IN MM IN MM
34822-32165_ _ 60 7 1/4 6 3/8 9.5 0.350 8.9 1.000 25.4 0.305 7.7 1.125 28.6 1/4
54822-32165_ _ 60 7 1/4 6 3/8 9.5 0.350 8.9 1.000 25.4 0.305 7.7 2.456 62.4 1/4
34828-32165_ _ 60 7 3/8 10 3/8 9.5 0.350 8.9 1.000 25.4 0.366 9.3 1.250 31.8 3/8
54828-32165_ _ 60 7 3/8 10 3/8 9.5 0.350 8.9 1.000 25.4 0.366 9.3 2.582 65.6 3/8
324/327125 _ _ 90 10 7/16 11 5/16 7.9 0.313 7.9 1.000 25.4 0.443 11.3 1.416 36.0 3/8
524/327125_ _ 90 10 7/16 11 5/16 7.9 0.313 7.9 1.000 25.4 0.443 11.3 2.832 71.9 3/8
324/329125_ _ 90 10 1/2 13 5/16 7.9 0.313 7.9 1.090 27.7 0.485 12.3 1.584 40.2 3/8
524/329125_ _ 90 10 1/2 13 5/16 7.9 0.313 7.9 1.090 27.7 0.485 12.3 3.168 80.5 3/8
324/327175_ _ 140 16 7/16 11 13/32 10.3 0.370 9.4 1.000 25.4 0.443 11.3 1.416 36.0 3/8
524/327175_ _ 140 16 7/16 11 13/32 10.3 0.370 9.4 1.000 25.4 0.443 11.3 2.832 71.9 3/8
324/329125_ _ 140 16 1/2 13 13/32 10.3 0.370 9.4 1.090 27.7 0.485 12.3 1.584 40.2 3/8
524/329175_ _ 140 16 1/2 13 13/32 10.3 0.370 9.4 1.090 27.7 0.485 12.3 3.168 80.5 3/8
‡
‡ Numerous variations are available. If required unit is not listed, contact our plant with your application requirements.
Lubricate once per shift. Check cover plate screws once per shift. Torque in reverse not to exceed torque in forward.
** Hex socket gear can be extended or modified to accept adapters, bits, chucks or magnets.
In mm In mm In mm
A2 C Hex Size
A A2
Hex p 6pt p 12pt p Other
B D
Extension
OUTPUT EXTENSION
B2 E Output Size
If necessary, can a sample of the part be sent for our review? p Yes p No
Power Tool
Manufacturer___________________________________________________________ Model #_____________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
23
Hold and Drive Quote request Form
Quote No. Date
Name_______________________________________________________ Company______________________________________
H/H
In mm Hold Info Diver Info
A In mm In mm
B Y Hex Ext.?
H/H
B2
DIA.
C
Hold Bit p Hex p Other H/H If Necessary, can a sample of the part be
D sent for our review? p Yes p No
E Bit Travel
Power tool
Square Drive: p 1/4” p 3/8” p 5/8” p 1” p Other_________________________________________________________
Manufacturer___________________________________________________________ Model #_____________________________
Air p Electric p Transducerized? p Yes p No Source: p In-House p Direct p Distributor p Jemms-Cascade
Quantity of Jemms units to be used: p 12 p6 p3 p Other____________________________________________________
Part # from catalog (if available)______________________________________________ Page #_____________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
24
in-line/20° Standard attachment Quote request Form
Quote No. Date
Name_______________________________________________________ Company______________________________________
p 20°
E H
D C
A2
H G
p In-Line
F
A2
In G mm In mm In mm
F
A2 D H
Hex Size
B E
Hex p 6pt p 12pt p Other
B2 F Hex Magnetized? p Yes p No
Hex
C G Extension?
If necessary, can a sample of the part be sent for our review? p Yes p No
power tool
Manufacturer___________________________________________________________ Model #_____________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
25
in-line/20° tube-nut attachment Quote request Form
Quote No. Date
Name_______________________________________________________ Company______________________________________
B T.0. B2 D
E
p 20°
H
C
D A2
E
G p In-Line
F
H
A2
G
In F mm In mm In mm
A2 E Tube
Diameter
B F
Hex Size
B2 G
Hex
C H Extension?
D T.O. Hex p 6pt p 12pt p Other
If necessary, can a sample of the part be sent for our review? p Yes p No
Power tool
Manufacturer___________________________________________________________ Model #_____________________________
Air p Electric p Transducerized? p Yes p No Source: p In-House p Direct p Distributor p Jemms-Cascade
Quantity of Jemms units to be Quoted: p 12 p6 p3 p Other_ _________________________________________________
Part # from catalog (if available)______________________________________________ Page #_____________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
26
standard attachment Quote request Form
Quote No. Date
Name_______________________________________________________ Company______________________________________
B B2 p In-Line Style
p Pistol Style
A A2
In mm In mm In mm
A D Hex p 6pt p 12pt p Other
A2 E
Hex Magnetized? p Yes p No
B
Hex Size
B2
Hex If necessary, can a sample of the part be
C Extended? sent for our review? p Yes p No
Power tool
Square Drive: p 1/4” p 3/8” p 5/8” p 1” p Other_________________________________________________________
Manufacturer___________________________________________________________ Model #_____________________________
Air p Electric p Transducerized? p Yes p No Source: p In-House p Direct p Distributor p Jemms-Cascade
Quantity of Jemms units to be used: p 12 p6 p3 p Other____________________________________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
27
tube-nut attachment Quote request Form
Quote No. Date
Name_______________________________________________________ Company______________________________________
D C p Pistol Style
E
OPTIONAL
In mm In mm In mm
A2 D Hex Size
A A2
B Hex
E Extended?
B2
T.O. Hex p 6pt p 12pt p Other
C
If necessary, can a sample of the part be sent for our review? p Yes p No
power tool
Square Drive: p 1/4” p 3/8” p 5/8” p 1” p Other_________________________________________________________
Manufacturer___________________________________________________________ Model #_____________________________
Air p Electric p Transducerized? p Yes p No Source: p In-House p Direct p Distributor p Jemms-Cascade
Quantity of Jemms units to be used: p 12 p6 p3 p Other____________________________________________________
Part # from catalog (if available)______________________________________________ Page #_____________________________
Notes/comments/special Instructions________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
© 2009 Jemms-Cascade Inc. 1886 Larchwood Dr., Troy, MI 48083 | P: 248.526.8100 | F: 248.526.0019 | E: goodtool@jemms-cascade.com
28
Mounting Procedures, Hand tighten and orientate to
approx. 10° with shims
Standard Thread
Materials needed:
• Bench Vice
• Shims (.003, .005, .010) Shims are necessary to maintain proper bevel
gear mesh of right angle head.
1. Remove pin from square drive spindle.
2. Hand-tighten and orientate to within approximately 10° of final location with shims.
3. Secure offset (by sides only) in bench vise, DO NOT CRUSH.
4. Move tool with right angle to final lock down position.
• CAUTION: Never use hammer or any impacting device. Use proper wrenching Offset Nutrunner
methods only. (R) Angle Head Attachment
Motor
Warranty
J.C.I. Jemms-Cascade, Inc. products are WARRANTED to be free of defect in material and craftsmanship for 1 (one)
year to original buyer from J.C.I. or its authorized representatives. This warranty applies only to products manufactured
by J.C.I. or its affiliates. This warranty DOES NOT APPLY to products that have been abused, misused, modified,
neglected, improperly operated, poorly maintained or serviced with substandard parts. Product must be returned
with our authorization, freight pre-paid for our inspection. Any replaced parts will become the property of J.C.I.
THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED. J.C.I. SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES, OR ANY OTHER COSTS OR EXPENSES EXCEPTING ONLY THE COST OR EXPENSE OF REPAIR OR REPLACEMENT
OF J.C.I. PRODUCT AS STATED ABOVE.