Faculty of Engineering Sciences & Technology, Hamdard University
Course Title: Machine Design and Cad -I Course Code: ME-311
Department Name: Mechanical Engineering Semester: 5th/ Fall 18
Course Teacher Name: Dr. Abdul Hameed Memon
Lab Teacher Name: Engr. Rabiya Jamil
Name of Lab: CAD-I Experiment Lecture S. # Experiments Perform Lecture No. and Topic Delivery Week Week To perceive the scope of CAD in Machine design. To recognize the features and application of facilities available Introduction, Design Process, 1 in the CAD laboratory. 1st week Introduction to CAD 02 To make students aware of the rules and regulation for working in the laboratory. Fundamental concepts of To learn the AutoCAD tools for development of drawing Computer Aided Design & 2 2nd week 02 machine components. Design Software To Identify the need of solid modelling and describe tools Fundamental Concepts ,Load & 3 3rd week 02 of Solid works 2014 software. Stress To practice a two dimensional sketch and three 4 dimensional model of mechanical part showing stress 4th week Stress Concentration, Problems 02 raisers (geometrical discontinuities). To practice a 2D rivet section and 3D rivet model using 5 5th week Riveted Joints, problems 02 AutoCAD 2013. To practice a 2D sketch and 3D model of the showing Welded Joints, problems 6 welded joints using Solid Works 2014. . Generate 6th week 02 Orthographic views from 3D model. To practice a 3D solid model of screw using Solid works 7 2014. Generate Orthographic views from 3D model.(Open 7th week Screwed Joints, problems 02 ended lab) Fundamental concepts of FEM To learn the Mechanical APDL tools for analysis of machine 8 8th week & application of Computer 02 components. Aided Design Software To learn the Ansys workbench tools for analysis of machine 9 10th week Keys, cotters , Problems 02 components. To simulate a plate with center hole and find the maximum axial stress. Also compare your result with a 10 11th week Design of couplings , Problems 02 computation using published stress concentration factor data. To practice a 3D solid model of keys and cotter using Solid Belt Drive Geometric 11 works 2014. Generate Orthographic views from 3D model. 12th week Parameters 02
To practice a 3D solid model of driver pulley for the belt
Belt Drive Design, Problems 12 drive system using Solid works 2014. Generate 13th week 02 Orthographic views from 3D model. Hamdard Institute of Engineering & Technology, Hamdard University Sharae Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi 74600, Pakistan. Hamdard Institute of Engineering & Technology Faculty of Engineering Sciences & Technology, Hamdard University To practice a 3D solid model of belt drive system using Design of Brakes 13 Solid works 2014. Generate Orthographic views from 3D 14th week 02 assembly To provide a chance for the student to create their project Design of Clutches 14 and to strengthen their hands on experience and 15th week 02 knowledge on the solid Works and Ansys.(Open ended lab)
Lab Engineer Name & Sign.: _______________________________
Theory Teacher Name & Sign.: _______________________________
Chairman / Program Coordinator: _______________________________
Name & Signatures
Hamdard Institute of Engineering & Technology, Hamdard University
Sharae Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi 74600, Pakistan. Hamdard Institute of Engineering & Technology Faculty of Engineering Sciences & Technology, Hamdard University Hamdard Institute of Engineering & Technology, Hamdard University Sharae Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi 74600, Pakistan.
Hamdard Institute of Engineering & Technology, Hamdard University
Sharae Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi 74600, Pakistan.