Professional Documents
Culture Documents
The Applications of Nanomaterials
The Applications of Nanomaterials
Materials with grain sizes in the order of a billionth of a meter are called nanomaterials, or nanocrystalline
materials. They exhibit very attractive and useful properties, which can be used for a range of structural and
non-structural applications.
Applications
As nanomaterials have exclusive, advantageous physical, chemical, and mechanical properties, they can be applied in
a host of applications including, but not limited to, those listed below.
However, there are a number of technical obstacles to achieving these advancements, such as the lack of ultrafine
precursors to make these parts, inadequate dissipation of huge amounts of heat generated by these microprocessors
because of faster speeds, poor mean time to failures (poor reliability), etc.
Nanomaterials help the industry to overcome these obstacles by offering manufacturers materials with better thermal
conductivity, nanocrystalline starting materials, ultra-high-purity materials, and longer-lasting, durable interconnections
(connections between different parts in the microprocessors).
Nanocrystalline tungsten heavy alloys can be used for such self-sharpening mechanisms due to their exclusive
deformation characteristics, for example, grain-boundary sliding. Therefore, nanocrystalline tungsten heavy alloys and
composites are being assessed for use as alternative DU penetrators.
Since aerogels are porous and include air trapped at the interstices, they are used for insulation in homes, offices, etc.
This considerably reduces the cooling and heating bills, thus saving power and decreasing the associated
environmental pollution.
https://www.azom.com/article.aspx?ArticleID=1066 1/7
12/17/2019 The Applications of Nanomaterials
They are also being employed as materials for “smart” windows, which darken when the sun is very bright (same as in
changeable lenses in sunglasses and prescription spectacles), and lighten when the sun is not shining very brightly.
Nanocrystalline zinc selenide, cadmium sulfide, zinc sulfide, and lead telluride prepared through the sol-gel methods are
potential materials for enhancing the resolution of monitors. The use of nanophosphors is intended to lower the cost of
these displays to make personal computers and high-definition televisions (HDTVs) affordable for an average household
in the United States.
The resolution of these display devices can be significantly improved by synthesizing nanocrystalline phosphors, while
considerably bringing down the manufacturing costs. Furthermore, the flat-panel displays manufactured using
nanomaterials have far higher contrast and brightness compared to the traditional ones due to their improved magnetic
and electrical properties.
Moreover, miniaturizing microelectronic circuits necessitates microdrills (drill bits having diameters lesser than the
thickness of an average human hair [100 µm]) with improved edge retention and much better wear resistance.
Nanocrystalline carbides are being used in these micro drills since they are much harder, stronger, and wear-resistant.
Elimination of Pollutants
Nanocrystalline materials have very large grain boundaries corresponding to their grain size. Therefore, they are very
active with regards to their physical, chemical, and mechanical properties. Owing to their improved chemical activity,
nanomaterials can be employed as catalysts to react with toxic and noxious gases such as nitrogen oxide and carbon
monoxide, in power generation equipment and automobile catalytic converters, to avoid environmental pollution caused
when gasoline and coal are burnt.
https://www.azom.com/article.aspx?ArticleID=1066 2/7
12/17/2019 The Applications of Nanomaterials
Traditional and rechargeable batteries are used in nearly all applications that necessitate electric power. These
applications include laptop computers, automobiles, toys, electric vehicles, personal stereos, cordless phones, cellular
phones, watches, and next-generation electric vehicles (NGEV) that reduce environmental pollution. The energy density
(storage capacity) of these batteries is very low, necessitating frequent recharging. The life of traditional and
rechargeable batteries is also low.
Nanocrystalline materials produced using sol-gel methods have a foam-like (aerogel) structure that can store
significantly more energy than their traditional equivalents. Hence, they are highly suitable for separator plates in
batteries. Moreover, nickel-metal hydride (Ni-MH) batteries made of nanocrystalline nickel and metal hydrides have
been predicted to necessitate much lesser recharging and to last considerably longer because of their large grain
boundary (surface) area and improved chemical, physical, and mechanical properties.
High-Power Magnets
A magnet’s strength is measured in terms of saturation magnetization and coercivity values. These values will increase
when there is a decrease in the grain size and an increase in the specific surface area (surface area per unit volume of
the grains) of the grains. It has been demonstrated that magnets made of nanocrystalline yttrium-samarium-cobalt
grains have highly uncommon magnetic properties because of their extremely large surface area.
Common applications for these high-power rare-earth magnets include ultra-sensitive analytical instruments, quieter
submarines, land-based power generators, automobile alternators, motors for ships, and magnetic resonance imaging
(MRI) in medical diagnostics.
High-Sensitivity Sensors
Sensors use their sensitivity to detect the variations in different parameters they are programmed to measure. The
parameters include chemical activity, thermal conductivity, electrical resistivity, magnetic permeability, and capacitance.
All of these parameters depend a lot on the microstructure (grain size) of the materials used in the sensors.
A variation in the sensor’s environment is revealed by the sensor material’s physical, chemical, or mechanical
characteristics, which is leveraged for detection. For example, a carbon monoxide sensor made of zirconium oxide
(zirconia) applies its chemical stability to identify whether carbon monoxide is present.
When carbon monoxide is present, the oxygen atoms in zirconium oxide react with the carbon in carbon monoxide to
reduce zirconium oxide partially. This reaction activates a modification in the sensor’s characteristics, such as
capacitance and conductivity (or resistivity).
The rate and the degree of this reaction are significantly increased by a decrease in the grain size. Therefore, sensors
made of nanocrystalline materials are highly sensitive to variations in their environment. Common applications for
sensors made using nanocrystalline materials are ice detectors on aircraft wings, smoke detectors, automobile engine
performance sensors, etc.
https://www.azom.com/article.aspx?ArticleID=1066 3/7
12/17/2019 The Applications of Nanomaterials
Existing automobile engines waste substantial amounts of gasoline, thus adding to environmental pollution by burning
the fuel incompletely. A traditional spark plug is not made to burn the gasoline totally and efficiently. This problem is
amplified by faulty, or worn-out, spark plug electrodes.
Since nanomaterials are harder, stronger, and considerably more erosion-resistant and wear-resistant, they are
currently being proposed for use as spark plugs. These electrodes extend the service life of the spark plugs and help
burn fuel far more efficiently and fully. A totally new spark plug design known as the “railplug” is also in the prototype
stage.
This railplug applies the technology derived from the “railgun”—a spin-off of
the famous Star Wars defense program. However, these railplugs produce Related Stories
much stronger sparks (with an energy density of almost 1 kJ/mm2). Hence, Determination of the Surface Zeta
traditional materials erode and corrode very quickly, and quite often are not Potential of Float Glass Coated
of any practical use in automobiles. with Polyelectrolytes
Characterization of Carbon
By contrast, railplugs made of nanomaterials are much more long-lasting
Nanomaterials Using Raman
than even the traditional spark plugs. Furthermore, automobiles waste
Microscopy
substantial amounts of energy by losing the thermal energy produced by the
Characterizing Carbon
engine. This is particularly true with diesel engines. Hence, plans have been
Nanomaterials with a Raman
proposed to coat the engine cylinders (liners) with nanocrystalline ceramics,
Analyzer
such as alumina and zirconia, so that they preserve heat in a more efficient
manner, thus ensuring full and efficient fuel combustion.
The fatigue strength increases with the decrease in the grain size of the material. Nanomaterials offer such a
considerable reduction in the grain size over traditional materials that fatigue life is increased by an average of 200%–
300%. Moreover, components made using nanomaterials are stronger and can work at higher temperatures, enabling
aircraft to fly faster and more efficiently (using the same quantity of aviation fuel).
In spacecraft, higher-temperature strength of the material is critical as the components (for example, thrusters, rocket
engines, and vectoring nozzles) work at much higher temperatures than aircraft and at greater speeds. Nanomaterials
are ideal contenders for spacecraft applications, as well.
https://www.azom.com/article.aspx?ArticleID=1066 4/7
12/17/2019 The Applications of Nanomaterials
Conversely, electromagnetic launchers (EML guns), or railguns, utilize electrical energy, as well as the concomitant
magnetic field (energy), for propelling the penetrators/projectiles at velocities of up to 10 km/second. Such an increase
in velocity causes greater kinetic energy for the same penetrator mass. The amount of energy is directly proportional to
the damage imparted to the target. Therefore, the DoD (particularly the U.S. Army) has undertaken wide-ranging
research on the railguns.
Since a railgun works on electrical energy, the rails have to be excellent conductors of electricity. Furthermore, they
need to be so strong and inflexible that the railgun does not sag while firing and collapse due to its own weight. Copper
is the apparent choice when it comes to high electrical conductivity.
However, railguns made of copper wear out considerably faster because of the erosion of the rails by the hypervelocity
projectiles. Moreover, they lack high-temperature strength. The erosion and wear of copper rails call for very frequent
barrel replacements.
To fulfill these necessities, a nanocrystalline composite material made of copper, tungsten, and titanium diboride is
being assessed as a potential candidate. This nanocomposite exhibits the necessary electrical conductivity, satisfactory
thermal conductivity, outstanding high strength, hardness, high rigidity, and wear/erosion resistance.
This results in erosion-resistant and wear-resistant railguns that last longer and can be fired more often than their
traditional equivalents.
Longer-Lasting Satellites
Satellites are being employed for both civilian and defense applications. These satellites make use of thruster rockets to
stay in or alter their orbits because of various factors, such as the impact of gravitational forces applied by the earth.
Hence, thrusters are needed to reposition the satellites.
To a great extent, the life of these satellites is governed by the amount of fuel they can take on board. In reality,
repositioning thrusters waste over one-third of the fuel carried aboard by the satellites, caused by partial and inefficient
burning of the fuel, such as hydrazine. The partial and inefficient combustion occurs due to rapid wearing out of onboard
ignitors that stop performing effectively as a result.
Nanomaterials like nanocrystalline tungsten-titanium diboride-copper composite are promising options for improving the
performance features and life of these ignitors.
If an implant must mimic a natural human bone in an effective way, the adjacent tissue must penetrate the implants,
thus offering the implant the necessary strength. Since these materials are comparatively impermeable, human tissue
does not penetrate the implants, thus minimizing their effectiveness.
https://www.azom.com/article.aspx?ArticleID=1066 5/7
12/17/2019 The Applications of Nanomaterials
Moreover, these metal alloys wear out fast, requiring frequent and very expensive surgeries. But nanocrystalline
zirconia (zirconium oxide) ceramic is hard, corrosion-resistant (biological fluids are corrosive), wear-resistant, and
biocompatible.
It is also possible to make nanoceramics porous as aerogels (aerogels can endure up to 100 times their weight) if they
are produced using sol-gel methods. This would lead to much lesser implant replacements, and thus a substantial
reduction in surgical expenses. Nanocrystalline silicon carbide (SiC) is a potential material for artificial heart valves
mainly because of its low weight, wear resistance, extreme hardness, high strength, corrosion resistance, and inertness
(SiC does not react with biological fluids).
Actually, nanocrystalline ceramics like silicon carbide (SiC) and silicon nitride (Si3N4) have been used in automotive
applications such as ball bearings, high-strength springs, and valve lifters. This is because they have good machinability
and formability, together with superior physical, mechanical, and chemical properties. They are also used as
components in high-temperature furnaces.
It is possible to press and sinter nanocrystalline ceramics into different shapes at considerably lower temperatures. By
contrast, it would be very hard, if not impracticable, to press and sinter traditional ceramics even at high temperatures.
Nanocrystalline materials like tungstic oxide (WO3⋅xH2O) gel are used in huge electrochromic display devices. The
reaction controlling electrochromism (a reversible coloration process that is influenced by an electric field) is the double-
injection of ions (or protons, H+) and electrons, which form tungsten bronze by combining with the nanocrystalline
tungstic acid. These devices are mainly used in ticker boards and public billboards to send information.
Electrochromic devices are analogous to liquid-crystal displays (LCD) generally used in watches and calculators. But
electrochromic devices display information by changing in color in response to an applied voltage. The color gets
bleached upon reversing the polarity. The resolution, contrast, and brightness of these devices largely rely on the
tungstic acid gel’s grain size. Therefore, nanomaterials are being investigated for this purpose.
Summary
https://www.azom.com/article.aspx?ArticleID=1066 6/7
12/17/2019 The Applications of Nanomaterials
From the examples provided in the article, it is quite clear that nanocrystalline materials produced by the sol-gel method
can be used in an extensive range of unique, new, and existing applications. It is also obvious that nanomaterials
outclass their traditional counterparts by virtue of their excellent physical, chemical, and mechanical properties, and by
their outstanding formability.
https://www.azom.com/article.aspx?ArticleID=1066 7/7