Professional Documents
Culture Documents
TK13A60D
Switching Regulator Applications
Unit: mm
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e.
reliability test report and estimated failure rate, etc).
Thermal Characteristics
2
Characteristics Symbol Max Unit
1
Note 1: Ensure that the channel temperature does not exceed 150℃.
1 2008-09-16
Marking
A line indicates
Lead(Pb)-Free Finish
2 2008-09-16
ID – VDS ID – VDS
20 30
COMMON SOURCE 10 10 9.0 8.0 COMMON SOURCE
Tc = 25°C 8 Tc = 25°C
PULSE TEST 25 PULSE TEST
(A)
(A)
16
7.0 7.5
DRAIN CURRENT ID
DRAIN CURRENT ID
20
12
7.0
6.5
15
8 6.5
6.0 10
6.0
4 5.5
5 VGS = 5.5V
VGS = 5V
0 0
0 2 4 6 8 10 0 10 20 30 40 50
COMMON SOURCE
VDS = 20 V Tc = 25℃
25 PULSE TEST PULSE TEST
(A)
8
DRAIN CURRENT ID
20
DRAIN-SOURCE VOLTAGE
15
ID = 13 A
4
10
Tc = 100°C
6.5
Tc = 25°C 2
5
Tc = −55°C 3
0 0
0 2 4 6 8 10 0 4 8 12 16 20
DRAIN-SOURCE ON RESISTANCE
VDS = 20 V
PULSE TEST
10 VGS = 10 V、15 V
RDS (ON) (Ω)
⎪Yfs⎪ (S)
100
0.1
25
Tc = −55°C
1
COMMON SOURCE
Tc = 25°C
PULSE TEST
0.1 0.01
0.1 1 10 100 0.1 1 10 100
3 2008-09-16
(A)
COMMON SOURCE COMMON SOURCE
DRAIN-SOURCE ON RESISTANCE
Tc = 25°C
VGS = 10 V
10
RDS (ON) ( Ω)
0.8
ID = 13A
0.6
6.5
3
0.4 1 10
5
0.2 3
1
VGS = 0, −1 V
0 0.1
−80 −40 0 40 80 120 160 0 −0.2 −0.4 −0.6 −0.8 −1 −1.2
Ciss
GATE THRESHOLD VOLTAGE
4
(pF)
1000
C
Coss
3
Vth (V)
CAPACITANCE
100
Crss
10 COMMON SOURCE
COMMON SOURCE 1 VDS = 10 V
VGS = 0 V ID = 1 mA
f = 1 MHz PULSE TEST
1 Tc = 25°C 0
0.1 1 10 100 −80 −40 0 40 80 120 160
(V)
DRAIN POWER DISSIPATION
VDS
VGS
400 16
60
DRAIN-SOURCE VOLTAGE
GATE-SOURCE VOLTAGE
VDD = 100 V
300 400 12
PD (W)
40
200 8
VGS 200 COMMON SOURCE
ID = 13 A
20
Tc = 25°C
100 4
PULSE TEST
0 0 0
0 40 80 120 160 0 20 40 60 80
4 2008-09-16
rth – tw
10
NORMALIZED TRANSIENT THERMAL
IMPEDANCE rth (t)/Rth (ch-c)
1
Duty = 0.5
0.2
0.1
0.1
0.05
PDM
0.02
t
0.01 0.01
T
SINGLE PULSE
Duty = t/T
Rth (ch-c) = 2.5°C/W
0.001
10 μ 100 μ 1m 10 m 100 m 1 10
100 μs * 500
ID max (continuous) *
AVALANCHE ENERGY
10 1 ms *
400
(A)
EAS (mJ)
DRAIN CURRENT ID
300
1 DC operation
Tc = 25°C
200
0.1 100
0
25 50 75 100 125 150
*: SINGLE NONREPETITIVE PULSE
0.01 Tc = 25°C CHANNEL TEMPERATURE (INITIAL)
CURVES MUST BE DERATED Tch (°C)
LINEARLY WITH INCREASE IN
TEMPERATURE.
VDSS max
0.001 BVDSS
1 10 100 1000 15 V
DRAIN-SOURCE VOLTAGE VDS (V) −15 V IAR
VDD VDS
RG = 25 Ω 1 ⎛ B VDSS ⎞
Ε AS = ⋅ L ⋅ I2 ⋅ ⎜ ⎟
VDD = 90 V, L = 5.3 mH 2 ⎜B − V ⎟
⎝ VDSS DD ⎠
5 2008-09-16
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6 2008-09-16