Professional Documents
Culture Documents
STR150
• Xenta 102-ES
PART NUMBER • Xenta 102-B
• Xenta 102-EF
Part Number Model Number • Xenta 102-VF
004602800 STR150 • Xenta 103-A
• Xenta 104-A
• Xenta 121-FC
SPECIFICATIONS
• Xenta 121-HP
Ambient Conditions
all software version 1.2 or later.
Storage temperature. . . . . . . . . . . –20 °C to +70 °C
(–4 °F to +158 °F)
Operation temperature. . . . . . . . . . . . 0°C to +50 °C Flammability
(+32 °F to +122 °F) UL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL 94 V-0
Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . max. 90% Temperature Range
non-condensing relative humidity Direction and display . . . . . . . . . 5-45 ˚C (41-113 ˚F)
Mechanical Transferred to X100 . . . . . 8-33.4 ˚C 946.4-92.1 ˚F)
Enclosure material . . . . . . . . . . . . . . . . . . . ABS/PC Accuracy . . . . at 15-30 ˚C (59-86 ˚F) ±0.5 ˚C (0.9 ˚F)
Enclosure rating . . . . . . . . . . . . . . . . IP 20/NEMA 1 Sensor time constant. . . . . . . . . . . . . . . . . . . 9 min.
Dimensions. . . . . . . . . . . . . . . . . . . . . . . see Fig. 1 Temperature Resolution, Room and Setpoint
Weight. . . . . . . . . . . . . . . . . . . . . . . . 85 g (0.19 lb.)
Display. . . . . . . . . . . . . . 0.1 or 0.5 ˚C (0.2 or 0.9 ˚F)
Agency Compliances
Temperature Updates
Emission
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 sec.
CE. . . . . . . . . . . . . . . . . . . . . . . . . . EN 61000-6-3
Setpoint Value
C-tick. . . . . . . . . . . . . . . . . . . . . . . . . C-Tick N1831
Range . . . . . . . . . . . . . . . . . . . . 15-30 ˚C (59-86 ˚F)
FCC. . . . . . . . . . . FCC Part 15, Subpart B, Class B
Span . . . . . . . . . . . . . . . . . ±0 to ±5 ˚C (±0 to ±9 ˚F)
Immunity
CE. . . . . . . . . . . . . . . . . . . . . . . . . . EN 61000-6-1 Data Communication
Safety Type. . . . . . . . . . . . . . . . . . . . . . serial to Xenta 100
CE. . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 61010-1 Part Numbers
UL . . . . . . . . . . . . . . . . . . . . . C-UL, UL 916 Listed STR150. . . . . . . . . . . . . . . . . . . . . . . . 004602800
02
03
Sensors & Input Devices STR150
FUNCTIONS
DIMENSIONS mm (in)
Increase Button
84 (3.3)
The increase button is used to increase the
82 (3.2)
temperature setpoint.
Decrease Button
24 (0.9)
The decrease button is used to decrease the
temperature setpoint.
Bypass Button
58 (2.28)
The bypass button is used to change from
116 (4.6)
standby (economy) or unoccupied mode to
comfort mode. When entering comfort mode,
the symbol on the display shows a steady light.
When the bypass time expires, the symbol
returns to its previous status again, provided that
the feedback mode is connected. Otherwise the
symbol returns to the Off status after two hours.
Mounting
temperature display.
• Change the timeout value. The units can be mounted directly onto the wall
• Configure the fan setting or fitted onto a wide variety of back-boxes. The
• Choose the displayed room and setpoint plug-in concept makes wiring quick and easy.
temperature resolution. Maintenance
• Choose the maximum setpoint offset span.
• Select or deselect the bypass function. No maintenance is required for the wall module.
If necessary, the wall module may be cleaned
with a soft cloth.
Schneider Electric Telephone Europe: Malmö, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com/buildings
03-00103-03-en December 2011
03
Sensors & Input Devices STR150
STR150
1. Increase button.
2. Decrease button.
3. Fan speed button.
4. Bypass button.
Figure 2
Schneider Electric Telephone Europe: Malmö, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com/buildings
03-00103-03-en December 2011
04
Sensors & Input Devices STR150
Schneider Electric Telephone Europe: Malmö, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com/buildings
03-00103-03-en December 2011