Professional Documents
Culture Documents
FOR
CONSTRUCTION OF PHASE-A WORK AT
JAWAHAR NAVODAYA
VIDYALAYA (JNV) BADAUN, UTTAR PRADESH
1
Volume II
Financial Bid
2
VOLUME - II
FORWARDING LETTER – PART (A)
CONTRACTOR’S NAME & ADDRES:
To
Dear Sir,
1. I/We have thoroughly examined and understood instructions to contractors, terms and conditions of the
contract given in the NIT and those contained in the general conditions of contract and its appendices, and
annexure and agree to abide by all the terms & conditions of the tender document and corrigendum etc.
I/We offer to carry out the work at the price quoted in the price schedule Part (B).
It is confirmed that the rates quoted above are all inclusive of all charges, taxes, duties or any other levies
as applicable including GST.
2. I/We agree to keep the offer open for acceptance up to and inclusive of the date under clause 2.7 of Section-
2. I/We shall be bound by communication of acceptance of the offer dispatched within the time.
3. I / We do hereby declare that the entries made in the tender and appendices attached therein are true and also
that I/We shall be bound by the act of my/our duly constituted attorney
Mr./Ms. whose signature is appended here to in the space specified for the
purpose and of any other person who in future may be appointed by me/ us to carry out the business of the
firm.
Yours faithfully
(Signature of contractor)
(Capacity in which signing along with seal)
NOTE:
(1) If the discrepancy exists between figures & words in quotations, in that case the amount in words
will prevail.
(2) Absurd / Abnormal rates will not be considered by the Employer.
3
Name and address of Bidder
Name
Address:
Date:
Date:
4
PART - B
Financial Bid
(ON THE BIDDER’S LETTER HEAD)
To,
Sir,
We offer to perform the Works described above in accordance with the Conditions of Contract
accompanying this Bid with Rs. (In figures) and Rupees
(In words).
Our Offered cost is inclusive of all charges, taxes, duties, levies as applicable including GST.
This Bid along with addendums/ corrigendum’s and written acceptance of it shall constitute a binding
Contract between us. We understand that you are not bound to accept the lowest or any Bid you
receive.
We hereby confirm that this Bid complies with the Bid Validity, Tender Fee and Earnest
Money Deposit required as per bidding documents.
Yours faithfully,
5
NAME OF WORK: CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA
(JNV) BADAUN, UTTAR PRADESH
NIT No. TCIL/CIVIL/PD(UP)-1/2019/101 Dated 26.12.2019
Summary of Cost
Name of Bidder :
BOQ Cost in Percentage quoted by the Quoted Amount (INR)
INR Above/ % age in % age in
S. No. Description
Below/ At figure Words in figure in Words
par
[1] [2] [3] [4] [5] [6] [7] [8]
4 Rebate if any
Total of All Schedules after Rebate
NOTE:
1. The tenderer shall furnish their rate in terms of % above/ below/ at par against DSR 2016 & NDSR items in Column 5.
2. If the tenderer chooses to opt "At par" under column 4, then the value against 'percentage' in figures in column no. 5 shall be
inserted as '0' (i.e. zero). In such case, if the tenderer fills any value of percentage (other than '0') under column 5, then it will not be
given any cognizance and "At par" option (i.e. "Zero" percent) chosen by the tenderer shall take precedence and the amount will be
taken as "At par" irrespective of the percentage mentioned under column 5.
3 .Quoted rates are inclusive of all charges, costs, taxes, levies etc. including GST as applicable.
4. Bidders to indictae the rates of GST:---------- %
Date
Place
1 School Building
a) Cost of Civil Work 54938266.25 133200.00
b) Cost of plumbing work 612198.65 501235.00
c) Cost of Electrical Work 1615391.70 1388280.00
d) School Shed For Central Courtyard 5621783.59
Sub Total -1 62787640.19 2022715.00 64810355.19
5 Principal Residence
a) Cost of Civil Work 2062926.01 97920.00
b) Cost of plumbing work 87573.45 103670.00
c) Cost of Electrical Work 164714.70 60450.00
Sub Total -5 2315214.16 262040.00 2577254.16
8 Electric Sub-Station
a) Cost of Civil Work 887546.18 5550.00
b) Cost of Electrical Work 48926.00 25770.00
Sub Total -8 936472.18 31320.00 967792.18
9 Pump House
a) Cost of Civil Work 168408.93 1850.00
b) Cost of Electrical Work 24832.00 9750.00
Sub Total -9 193240.93 11600.00 204840.93
10 Sentry Booth
a) Cost of Civil Work 74885.37
b) Cost of Electrical Work 15168.00 3682.05
Sub Total -10 90053.37 3682.05 93735.42
Note: Bidder will mention % above or below (as the case may be) on DSR & Non-DSR items cost in Price Bid
sheet only
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN, UTTAR
PRADESH
SUMMARY OF DEVELOPMENT WORKS
Amount
S.N. PARTICULARS OF ITEMS
DSR-2016 Non-DSR
1 DEVELOPMENT OF CAMPUS
1.1 BASKET BALL COURT (2 Nos) 11,01,016.20 3,00,000.00
1.2 KHO-KHO COURT (2 Nos) 3,29,976.00
1.3 400 METRE RUNNING TRACK 11,17,593.18
1.5 EARTH CUTTING/ FILLING, DEVELOPMENT OF LAND 22,53,675.90
4 EXTERNAL SEWERAGE
4.1 SEPTIC TANK & SOAK PIT 15,36,987.72
4.2 WASTE FOOD TANK (1Nos.) 1,08,631.70
4.3 EXT. SEWERAGE LINE 22,09,262.92
5.0 H.P. KIRLOSKER SEWERAGE PUMP ( AIR COOL) MOUNTED
ON TROLLY WITH 10 M.SUCTION & 10 M. DEL FLEXIBLE PIPE
4.4 1,50,000.00
(2x75000=1,50,000)
5 EXTERNAL ELECTRIFICATION
5.1 HT/ LT PANEL 13,97,000.00
5.2 STREET LIGHTING USING UNDER GROUND CABLES 25,99,143.69
EXTERNAL CABLE LAYING / CABLE CONNECTION USING U.G.
5.3 CABLES FROM SUB STATION TO FEEDER PILLER / BUILDIING 14,39,662.71
AND PUMP HOUSE AND EARTHING
200KVA TRANSFORMER, 2-POLE STRUCTUR FOR
5.4 TRANSFORMER, 25 KVA RATING DG Set AND DG SET 60,896.69 7,00,102.00
FOUNDATION.
ABSTRACT OF COST
[SCHOOL BUILDING]
S.N. DESCRIPTION OF ITEM DSR- QUANTITY UNIT RATES AMOUNT DSR AMOUNT
2016 ITEM [M.R. ITEM]
2 Supplying and stacking of good earth at site. 16.3.9 1860.71 CUM 332.55 618779.11
40 Steel Painting:
(a) With ready mixed red oxide zink chromate primer
of approved brand and manufacture on steel
galvanised iron/steel works.
(i) 300 mm weighing not less than 330 gms 9.86.1 292.00 NOS 169.15 49391.80
(ii) 250 mm weighing not less than 280 gms 9.86.2 225.00 NOS 138.25 31106.25
VI MISCELLANEOUS 29092.70
Wiring for group controlled (looped) light point/fan point/exhaust fan point/
call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC
1.55 insulated copper conductor single core cable in surface/ recessed PVC
conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable etc. as required.
1.55.3 Group C Point 250.00 415.00 103750.00
2 Twin Control Point wiring in PVC conduit, with piano type switch :-
1.9 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed medium class pvc
conduit, 2 way piano type switch, phenolic laminated sheet, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc. as required. Point 60.00 719.00 43140.00
1 2.3 Supplying and fixing following way, single pole and neutral, sheet steel,
MCB distribution board, 240 V, on surface/ recess, complete with tinned
copper bus bar, neutral bus bar, earth bar, din bar, interconnections,
powder painted including earthing etc. as required. (But without
2.3.1 MCB/RCCB/Isolator)
6 way , Double door Each 2.00 942.00 1884.00
2 2.4 Supplying and fixing following way, horizontal type TP&N, sheet steel MCB
distribution board, 415 V on surface /recess, complete with tinned
copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required (But without MCB / RCCB /
Isolators).
2.4.3 8 way (4 + 24), Double door Each 4.00 3171.00 12684.00
3 2.14 Supplying and fixing following rating, double pole, (single phase and
neutral), 240 volts, residual current circuit breaker (RCCB), having a
sensitivity current upto 30 mA in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
2.14.3 63 amps. Each 12.00 2242.00 26904.00
4 2.10 Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series,
miniature circuit breaker (MCB)suitable for inductive load of following
poles in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
2.10.1 single pole Each 80.00 173.00 13840.00
5 Supplying & fixing single pole, blanking plate in the existing MCB DB
2.11 complete etc. as required. Each 10.00 7.00 70.00
(NON-DSR)
6 Supplying and fixing following rating, Single/ double/ three pole, 230/ 415
volts, MCB "C" curve in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
NDSR 63 amps FP MCB Each 4.00 1710.00 6840.00
NDSR 40 amps DP MCB Each 2.00 860.00 1720.00
3 1.21 Supply and fixing of following sizes of medium class PVC conduit along
with accessories in surface/recess including cutting the wall and making
good the same in case of recessed conduit as required :
1.21.1 20 mm. M 500.00 57.00 28500.00
1.21.2 25 mm. M 120.00 69.00 8280.00
1.21.3 32 mm. M 120.00 89.00 10680.00
4 1.18 Supply and drawing following pair, 0.5 sq.mm. FRLS PVC insulated
annealed copper conductor, unarmoured telephone cable in the existing
surface / recessed steel/ PVC conduit as required.
1.18.2 2 Pair M 600.00 19.00 11400.00
5 1.19 Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm. Solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface / recessed steel/ PVC conduit as
required. M 120.00 29.00 3480.00
(NON-DSR)
1 Providing, laying, connecting, testing & commissioning of multi-core
telephone armoured cables of conductor size 0.5 sq.mm. annealed tinned
electrolitic grade copper, PVC insulated, twisted pairs bunched together,
NDSR
over all PVC sheathed, GI strip or wire armouring laid on existing cable tray
or along the wall or laid in pipes or in trenches including excavation of
cable trench, sand filling covering with bricks and back filling complete as
required.
20 pair M 90.00 240.00 21600.00
2 Providing, fixing, connecting & testing of Telephone Tag Block krone type
in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure
NDSR duly painted by synthetic enamel over anti corrosive primer, lockable and
hinged cover with provision for cable through glands complete in all
respects.
20 pair with 2 Krone Module of Krone Make Nos 1.00 1050.00 1050.00
1 5.4 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including
accessories and providing masonary enclosure with cover plate having
locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/
coke and salt as required. Set 2.00 4327.00 8654.00
2 5.9 Supplying and laying 25 mm x 5 mm. G.I. strip at 0.50 metre below ground
as strip earth electrode, including connection/ terminating with G.I. nut, bolt,
spring, washer etc. as required. (Jointing shall be done by overlapping and
with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
M 40.00 85.00 3400.00
3 5.11 Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from
earth electrode including connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required. M 20.00 351.00 7020.00
4 5.15 Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for
connections etc. as required. M 100.00 129.00 12900.00
5 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
earthing as required. M 200.00 37.00 7400.00
1 5.4 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including
accessories and providing masonary enclosure with cover plate having
locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/
coke and salt as required. Set 4.00 4327.00 17308.00
2 6.2 Providing and fixing of lighting conductor finial, made of 25 mm dia. 300
mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick
G.I. base plate including holes etc. complete as required. Each 4.00 304.00 1216.00
5 6.12 Providing and fixing testing joint, made of 20mm. x 3mm. thick G.I. strip,
125mm. long, with 4 nos of G.I. bolts, nuts, check nuts and spring 2.00
washers etc. complete as required. Each 73.00 146.00
6 6.14 Providing & laying G.I. tape, 32mm x 6mm thick, from earth electrode
150.00
directly in ground as required. M 112.00 16800.00
1 2.21 Providing and fixing M.V. danger notice plate of 200mmx150mm made of
mild steel, atleast 2mm thick and vitreous enamelled white on both sides
and with inscription single red colour on FRLSont side as required. Each 2.00 149.00 298.00
2 1.38 Supplying and fixing call bell/buzzer suitable for single phase, 230 volts,
complete as required. NOS 2.00 61.00 122.00
3 14.14 Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in
ground complete with RCC collars, jointing with cement mortar 1:2 (1cement
: 2 fine sand ) including trenching (75 cm deep) and refilling etc as required.
14.14.2 150 mm. dia. MTRS 30.00 405.00 12150.00
4 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for
ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5
10.18 DSR- mm thick M.S. sheet with its top surface hacked for proper bonding,
2018 top lid shall be screwed into the cast iron/ M.S. sheet box by means of
(Civil) 3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 127.00 130.10 16522.70
Supply of 40W LED Tube (Ceiling Surface) with all accessories as per
4 NDSR standard item..(Such as Bajaj BCLAB 40W or Equivalent). Each 42.00 1150.00 48300.00
Supply of 35W LED Tube (Ceiling Suspended) with all accessories as per
4 NDSR standard item..(Such as Panasonic PLHM01356 or Equivalent). Each 149.00 5640.00 840360.00
2 1.45 Installation, testing and commissioning of ceiling fan including wiring the
down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC
insulated, copper conductor, single core cable, including providing and fixing
phenolic laminated sheet cover on the fan box etc. as required.
Each 127.00 132.00 16764.00
3 1.50 Installation of exhaust fan in the existing opening, including making good
the damage, connection, testing, commissioning etc. as required
1.50.1 Upto 450 mm sweep Each 8.00 224.00 1792.00
3 MR Providing and Fixing stainless steel Horizontal / Vertical grab bar 600mm length fixed
to PVC cleats with C.P. brass screws wherever required with approved make & quality
and as per the directions and to the satisfaction of Engineer-in-charge. each 4.00 3200.00 12800.00
1 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide
with minimum distances of 37 mm from wall face with concealed fittings arrangement
of approved quality and colour, weighing not less than 88 gms. each 9.00 197.55 1777.95
2 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements, weighing not less than
106 gms. each 9.00 112.30 1010.70
3 17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP
thread and shapes, weighing not less than 60 gms. each 14.00 106.50 1491.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring
joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends,
tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion
joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor
level supported by clamp & hangers etc. in concealed / inside duct / under floor &
basement ceiling / external work etc. including chase cutting as required, excavation
and back filling in all kind of soils, suspended from floor under false ceiling or
embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement
concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The
work includes commissioning of all pipes lines as per drawings and specifications and
as directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 250.00 585.00 146250.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 80.00 445.00 35600.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling
level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making
good the same with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 5.00 365.00 1825.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 20.00 410.00 8200.00
MR P-Trap type Floor Trap 110 x 75 mm each 30.00 445.00 13350.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 40.00 145.00 5800.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat
round cover with screws and other required fitting complete as required. each 20.00 710.00 14200.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring
joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends,
tees, junctions (with or without doors), reducers, couplers, expansion joints / bellows,
cowels, clamps, rubber rings, MS gratings over pipes of bell mouth construction with
epoxy painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc.
in concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under
false ceiling or embedding the pipes laid under floors / building in 75 mm. alround
1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including cost of shuttering for proper completion of the work, breaking
and making good the walls and floors etc. after pipes have been duly laid and tested.
The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes
commissioning of all pipes lines as per drawings and specifications and as directed by
engg-in-charge at site.
MR 110 mm dia metre 200.00 505.00 101000.00
TOTAL SUB HEAD (III) (NON-DSR) 330975.00
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)
over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1
cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete. Each 14.00 187.60 2626.40
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 60.00 219.20 13152.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water
supply including all CPVC plain and brass threaded fittings including fixing the pipes
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of Engineer in
charge.
Internal work exposed on wall
18.7.2 20mm nominal outer dia pipes metre 75.00 179.95 13496.25
18.7.3 25mm nominal outer dia pipes metre 100.00 216.20 21620.00
18.7.4 32mm nominal outer dia pipes metre 76.00 289.05 21967.80
18.7.5 40mm nominal outer dia pipes metre 45.00 385.50 17347.50
18.7.6 50mm nominal outer dia pipes metre 65.00 548.55 35655.75
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water
supply including all CPVC plain and brass threaded fittings including fixing the pipes
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 150.00 246.20 36930.00
18.8.2 20mm nominal outer dia pipes metre 75.00 284.85 21363.75
18.8.3 25mm nominal outer dia pipes metre 75.00 333.60 25020.00
18.8.4 32mm nominal outer dia pipes metre 65.00 412.90 26838.50
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
18.48B Circular tank Per Ltr 20000.00 7.25 145000.00
RATE AMOUNT
S.No DSR-2016 DESCRIPTION UNIT QTY
(in Rs) (in Rs)
11 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1A 20 mm nominal bore each 12.00 396.55 4758.60
18.17.1 25 mm nominal dia each 7.00 428.20 2997.40
18.17.2 32 mm nominal bore each 3.00 500.75 1502.25
18.17.3 40 mm nominal bore each 3.00 584.70 1754.10
18.17.4 50 mm nominal dia each 5.00 749.90 3749.50
12 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
18.18.3 25 mm nominal dia each 4.00 331.95 1327.80
MR 73.30 mm OD / 65 mm ID (min wall thickness - 5.16 mm) each 45.00 1200.00 54000.00
MR 73.30 mm OD / 80 mm ID (min wall thickness - 5.16 mm) each 35.00 1560.00 54600.00
4 Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting
and making good the walls and floors etc. as required.
MR a) 25 mm dia each 10.00 80.00 800.00
5 Supply & fixing in position ISI marked cast iron double flanged butterfly valves (PN
1 MPa) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile
rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets
etc. including testing, Complete as per drawings & directions of the Engineer-in-
charge.
MR 65 mm nominal dia each 4.00 3350.00 13400.00
MR 80 mm nominal dia each 2.00 3795.00 7590.00
ABSTRACT OF COST
[SHED FOR SCHOOL BUILDING]
(i) Lvl 0.00 to 1.50 mt. 2.8.1 128.130 CUM 166.40 21,320.83
2 Supplying and stacking of good earth at site. 16.3.9 382.150 CUM 332.55 1,27,083.98
TOTAL 56,21,783.59
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN, UTTAR PRADESH
S.N. DESCRIPTION OF ITEM DSR-2016 QTY UNIT RATES AMOUNT (In RS.) AMOUNT (In RS.)
ON DSR ON NON SHEDULE
2 Supplying and stacking of good earth at site. 16.3.9 277.950 CUM 332.55 92432.27
10 Brick work with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in foundation and plinth in:Cement mortar 1:6
(1 cement : 6 coarse sand) 6.1.2 30.230 CUM 4751.65 143642.38
11 Providing and laying damp-proof course 40mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone
aggregate 12.5mm nominal size) 4.10 55.340 SQM 263.10 14559.95
13 Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in
superstructure above plinth level up to floor V level in : Cement
mortar 1:6 (1 cement : 6 coarse sand) 6.34.2
122.460 CUM 6167.20 755235.31
14 Half brick masonry with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in superstructure above plinth level
up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) 6.13.2 8.21 Sqm 684.20 5617.28
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and
approved by Engineer-in-charge over the RCC slab including
adjoining walls upto 300 mm height including cleaning the surface
before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm
to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming
to IS : 2645 and approved by Engineer-in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand)
admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height including rounding
of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel with neat
cement slurry and making pattern of 300x300 mm square 3 mm
deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer-in-Charge :
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm. 22.7.1 712.700 SQM 1034.65 737395.06
17 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of
door shutter to be measured). 9.23 33.71 SQM 365.85 12332.80
22 Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and
all members such as F7D, F4B, K11 B and K12 B etc. complete of
standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and riveted, including providing and fixing
of hinges, pivots, including priming coat of approved steel primer,
but excluding the cost of other fittings, complete all as per
approved design, (sectional weight of only steel members shall be
measured for payment). Fixing with 15x3 mm lugs 10 cm long
embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1
Cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size).
10.11.1 1683.370 KG 113.60 191230.83
23 Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with : 4.0 mm
thick glass panes. 10.30.1 93.520 SQM 689.05 64439.96
33 Kota stone slab flooring over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match
the shade of the slab, including rubbing and polishing complete
with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25
mm thick 11.26.1 907.040 SQM 1158.10 1050443.02
36 Providing and fixing Ist quality ceramic glazed wall tiles conforming
to IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-in-Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing in white cement
mixed with pigment of matching shade complete.
37 Extra for providing opening of required size & shape for wash
basins/ kitchen sink in kitchen platform, vanity counters and similar
location in marble/Granite/stone work including necessary holes for
pillar taps etc. including moulding, rubbing and polishing of cut
edges etc. complete.
8.5 4.00 NO 427.95 1711.80
39 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of approved
brand and manufacture on steel galvanised iron/steel works.
13.50.3 153.92 SQM 29.10 4479.07
(b) Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade: Two or more coats on new
work. 13.61.1 153.92 SQM 78.40 12067.33
43 Providing & fixing Stainless steel sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade with nuts
and screws etc complete. (a) 250mm x 16mm .
M.R. 16.00 NOS 500.00 8000.00
44 Providing and fixing stainless steel towerbolts (barrel type) with
necessary screws etc. complete.
300 x 10mm M.R. 16.00 NOS 400.00 6400.00
200 x 10mm M.R. 16.00 NOS 350.00 5600.00
(NON-DSR')
1 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 54.00 345.00 18630.00
2 MR S/F of shock treatment chart (prescribed under I.E.rules) duly FRLSamed with
glass and supported from back with hard board with supply of all material labour
T & P etc for proper completion of work. Each 1.00 1020.00 1020.00
3 MR Supplying, Fixing, Testing, Commissioning of 1800 mm x 900 mm x 20 mm thick
chequered rubber matting of tested quality to withstand 11 KV dielectric
strength complete in all respects. Each 1.00 3170.00 3170.00
4 AC Three Phase Dual Source CT operated, AC sensing ,Multifunction Energy
meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485
Communication, Backlit LCD Display of Rating
MR ( Measures & Displays , Active & apparent energy,Loadsurvey , TOD & Power
On/Off Events) of Rating 5-60 A MTRS 1.00 8000.00 8000.00
2 1 x 15 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W
WH RD)
Each 3.00 1270.00 3810.00
3 1 x 18 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 18W
WH RD)
Each 10.00 1270.00 12700.00
4 Supply of Mounting rail with Master LED tube with all accessories as per
standard item:
MR TMC 501 P 2xT-LED 22W P3241 with Master LED Tube 2x18 W, 3200 lumen
Each 78.00 2690.00 209820.00
SUPPLY OF CEILING & EXHAUST FANS
5 Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod,
blades, 2 nos. caps & regulator etc. ISI with 5 star marked & energy efficient
complete as required.
MR 1200 mm sweep Nos 61.00 2470.00 150670.00
6 Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts,
bolts, mounting FRLSame and other accessories etc. complete
MR 300 mm sweep 900 rpm Nos 13.00 3230.00 41990.00
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses
etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
2 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide
with minimum distances of 37 mm from wall face with concealed fittings arrangement of
approved quality and colour, weighing not less than 88 gms. each 1.00 197.55 197.55
3 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with
CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of
88 mm, weighing not less than 170 gms each 1.00 390.20 390.20
4 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
each 3.00 112.30 336.90
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /
bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level
supported by clamp & hangers etc. in concealed / inside duct / under floor & basement
ceiling / external work etc. including chase cutting as required, excavation and back filling
in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid
under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for
proper completion of the work, breaking and making good the walls and floors etc. after
pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on
50x50x5 mm slotted angle. The cost will include all support arrangements. The work
includes commissioning of all pipes lines as per drawings and specifications and as
directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 80.00 585.00 46800.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 40.00 420.00 16800.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min
6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,
enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported
by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same
with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 1.00 365.00 365.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 7.00 410.00 2870.00
MR P-Trap type Floor Trap 110 x 75 mm each 15.00 445.00 6675.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 23.00 145.00 3335.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round
cover with screws and other required fitting complete as required. each 1.00 710.00 710.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, MS gratings over pipes of bell mouth construction with epoxy
painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under false
ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4
cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring
shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
MR 110 mm dia metre 60.00 505.00 30300.00
TOTAL SUB HEAD (III) (NON DSR) 109755.00
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing
the outlet complete. Each 10.00 244.05 2440.50
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
pipe with brass unions.
1
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 9.00 67.80 610.20
2 18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms each 3.00 103.30 309.90
3 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 11.00 475.70 5232.70
4 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick
work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface
box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix
(1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary
excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone
aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement
: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete
as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 1195.35 1195.35
5 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 5.00 147.75 738.75
18.46.2 20mm dia nominal bore each 5.00 170.95 854.75
18.46.3 25mm dia nominal bore each 5.00 205.80 1029.00
18.46.4 32mm dia nominal bore each 5.00 240.65 1203.25
18.46.5 40mm dia nominal bore each 5.00 298.75 1493.75
18.46.6 50mm dia nominal bore each 5.00 384.90 1924.50
18.46.7 65mm dia nominal bore each 5.00 617.20 3086.00
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 10.00 219.20 2192.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per direction of Engineer in charge.
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same including testing of
joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 80.00 246.20 19696.00
18.8.2 20mm nominal outer dia pipes metre 30.00 284.85 8545.50
18.8.3 25mm nominal outer dia pipes metre 40.00 333.60 13344.00
18.8.4 32mm nominal outer dia pipes metre 15.00 412.90 6193.50
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :
12701 marked, with cover and suitable locking arrangement and making necessary holes
for inlet, outlet and overflow pipes but without fittings and the base support for tank.
MR 73.30 mm OD / 65 mm ID (min wall thickness - 5.16 mm) each 6.00 1200.00 7200.00
MR 73.30 mm OD / 80 mm ID (min wall thickness - 5.16 mm) each 6.00 1560.00 9360.00
2 Providing & fixing of hand lever operated forged brass body full way ball valve type
isolating valve having forged brass hard chrome plated mirror finish ball, steel handle
with PVC grip, teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete.
3 Providing & fixing brass ball float valve with bronze floats of approved quality complete.
ABSTRACT OF COST
[BOY'S DORMITORY HALL WITH WARDEN RESIDENCE]
2 Supplying and stacking of good earth at site. 16.3.9 376.53 CUM 332.55 125215.05
45 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of
approved brand and manufacture on steel galvanised
iron/steel works. 13.50.3 605.72 SQM 29.10 17626.45
(b) Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade: Two
or more coats on new work. 13.61.1 605.72 SQM 78.40 47488.45
(NON-DSR )
1 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 116.00 345.00 40020.00
2 AC Three Phase Dual Source CT operated, AC sensing ,Multifunction Energy
meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485
Communication, Backlit LCD Display of Rating
MR ( Measures & Displays , Active & apparent energy,Loadsurvey , TOD & Power
On/Off Events) of Rating 5-60 A Each 1.00 8000.00 8000.00
2 Supply of Mounting rail with Master LED tube with all accessories as per
standard item:
MR TMC 501 P 1xT-LED 22W P3241 with Master LED Tube 18 W, 1600 lumen
Each 48.00 1550.00 74400.00
3 MR TMC 501 P 2xT-LED 22W P3241 with Master LED Tube 2x18 W, 3200 lumen
Each 96.00 2690.00 258240.00
4 1 x 15 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W
WH RD) Each 4.00 1270.00 5080.00
5 1 x 18 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 18W
WH RD) Each 116.00 1270.00 147320.00
6 MR 1x12 watt Wall mounted LED Bracket Light complete with 1 no. 12 watts LED
lamp as required. Each 28.00 340.00 9520.00
The MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking
arrangement, with trip setting as per load requirement. TP MCCB shall be with
solid isolable neutral link. The breaking capacity specified is Ics value. All
MCCB's shall be thermomagnetic type. All outgoing MCB's shall be C type with
10 KA breaking capacity.
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses
etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
SUB HEAD (I) :- SANITARY FIXTURES (NON DSR ITEMS) (For WARDEN)
1 MR Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube,
hand shower, couplings, wall hook and other accessories. each 6.00 1780.00 10680.00
2 MR Providing & fixing CP brass Overhead shower with shower arm, Hand Shower
95mm dia and Easy flex Tube with accessories complete I all respect each 8.00 4925.00 39400.00
3 MR Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.
each 16.00 650.00 10400.00
2 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide
with minimum distances of 37 mm from wall face with concealed fittings arrangement
of approved quality and colour, weighing not less than 88 gms. each 10.00 197.55 1975.50
3 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats
with CP brass screws with concealed fittings arrangement of approved quality and
colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of
88 mm, weighing not less than 170 gms. each 32.00 390.20 12486.40
4 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements, weighing not less than
106 gms. each 24.00 112.30 2695.20
5 17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP
thread and shapes, weighing not less than 60 gms. each 8.00 106.50 852.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring
joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends,
tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion
joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor
level supported by clamp & hangers etc. in concealed / inside duct / under floor &
basement ceiling / external work etc. including chase cutting as required, excavation
and back filling in all kind of soils, suspended from floor under false ceiling or
embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement
concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The
work includes commissioning of all pipes lines as per drawings and specifications and
as directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 360.00 585.00 210600.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 40.00 420.00 16800.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling
level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making
good the same with cement concrete 1:2:4 complete as required.
MR 32 mm dia. metre 40.00 95.00 3800.00
MR 40 mm dia. metre 95.00
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel
grating complete in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 1.00 365.00 365.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 20.00 410.00 8200.00
MR P-Trap type Floor Trap 110 x 75 mm each 48.00 445.00 21360.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 69.00 145.00 10005.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat
round cover with screws and other required fitting complete as required. each 8.00 710.00 5680.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring
joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends,
tees, junctions (with or without doors), reducers, couplers, expansion joints / bellows,
cowels, clamps, rubber rings, MS gratings over pipes of bell mouth construction with
epoxy painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc.
in concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under
false ceiling or embedding the pipes laid under floors / building in 75 mm. alround
1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including cost of shuttering for proper completion of the work, breaking
and making good the walls and floors etc. after pipes have been duly laid and tested.
The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes
commissioning of all pipes lines as per drawings and specifications and as directed by
MR engg-in-charge at site.
110 mm dia metre 200.00 505.00 101000.00
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)
over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1
cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete. Each 14.00 187.60 2626.40
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
1 pipe with brass unions.
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 66.00 67.80 4474.80
2 18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms each 34.00 103.30 3512.20
3 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 4.00 555.30 2221.20
4 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 82.00 475.70 39007.40
5 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S.
brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I.
surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete
slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size);
necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded
stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3
(1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat
cement complete as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 1195.35 1195.35
6 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 5.00 147.75 738.75
18.46.2 20mm dia nominal bore each 5.00 170.95 854.75
18.46.3 25mm dia nominal bore each 5.00 205.80 1029.00
18.46.4 32mm dia nominal bore each 5.00 240.65 1203.25
18.46.5 40mm dia nominal bore each 10.00 298.75 2987.50
18.46.6 50mm dia nominal bore each 10.00 384.90 3849.00
18.46.7 65mm dia nominal bore each 10.00 617.20 6172.00
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 40.00 219.20 8768.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water
supply including all CPVC plain and brass threaded fittings including fixing the pipes
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of Engineer in
charge.
Internal work exposed on wall
18.7.2 20mm nominal outer dia pipes metre 40.00 179.95 7198.00
18.7.3 25mm nominal outer dia pipes metre 50.00 216.20 10810.00
18.7.4 32mm nominal outer dia pipes metre 40.00 289.05 11562.00
18.7.5 40mm nominal outer dia pipes metre 130.00 385.50 50115.00
18.7.6 50mm nominal outer dia pipes metre 30.00 548.55 16456.50
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water
supply including all CPVC plain and brass threaded fittings including fixing the pipes
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 260.00 246.20 64012.00
18.8.2 20mm nominal outer dia pipes metre 40.00 284.85 11394.00
18.8.3 25mm nominal outer dia pipes metre 35.00 333.60 11676.00
18.8.4 32mm nominal outer dia pipes metre 30.00 412.90 12387.00
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
18.48B Circular tank Per Ltr 41000.00 7.25 297250.00
11 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1A 20 mm nominal bore each 12.00 396.55 4758.60
18.17.1 25 mm nominal dia each 10.00 428.20 4282.00
18.17.2 32 mm nominal bore each 18.00 500.75 9013.50
18.17.3 40 mm nominal bore each 14.00 584.70 8185.80
12 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
18.18.2 20 mm nominal dia each 2.00 327.05 654.10
18.18.3 25 mm nominal dia each 4.00 331.95 1327.80
ABSTRACT OF COST
[GIRL'S DORMITORY]
2 Supplying and stacking of good earth at site. 16.3.9 206.16 CUM 332.55 68558.51
(e) The whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final test.
All above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
18 Extra for providing lipping with 2nd class teak wood battens
25 mm minimum depth on all edges of flush door shutters
(over all area of door shutter to be measured).
9.23 101.38 SQM 365.85 37089.87
24 Providing & fixing glass panes with putty and glazing clips in
steel doors, windows, clerestory windows, all complete with :
4.0 mm thick glass panes. 10.30.1 218.50 SQM 689.05 150557.43
33 Brick edging in full brick width and half brick depth including
excavation refilling and disposal of surplus earth lead upto 50
metres. With common burnt clay F.P.S.(non modulur)
bricks of class designation 75 16.7.1 154.41 RM 127.60 19702.72
34 Providing and laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS: 15622, of
approved make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing
with grey cement slurry @ 3.3kg/sqm including grouting the
joints with white cement and matching pigments etc.,
complete.Size of Tile 600x600 mm
11.41.2 222.24 SQM 1119.40 248775.46
44 Extra for providing opening of required size & shape for wash
basins/ kitchen sink in kitchen platform, vanity counters and
similar location in marble/Granite/stone work including
necessary holes for pillar taps etc. including moulding,
rubbing and polishing of cut edges etc. complete.
8.5 2.00 NO 427.95 855.90
45 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of
approved brand and manufacture on steel galvanised
iron/steel works. 13.50.3 310.84 SQM 29.10 9045.44
(b) Painting with synthetic enamel paint of approved brand
and manufacture to give an even shade: Two or more coats
on new work. 13.61.1 310.84 SQM 78.40 24369.86
55 Providing and filling of cinder in sunken portions. M.R. 6.14 CUM 2000.00 12280.00 12280.00
56 Providing and fixing 1mm thick M.S. sheet for cupboard with
frame of 40x40x6 mm angle iron and 3 mm M.S. gusset
plates at the junctions and corners, all necessary fittings
complete, including finishing with epoxy paint (Two or more
coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming
coat, preparation of surface, etc. complete.
Quotation 51.94 SQM 7000.00 363580.00
(NON-DSR'2016)
1 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 58.00 345.00 20010.00
2 AC Three Phase Dual Source CT operated, AC sensing ,Multifunction Energy
meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485
Communication, Backlit LCD Display of Rating
MR ( Measures & Displays , Active & apparent energy,Loadsurvey , TOD & Power
On/Off Events) of Rating 5-60 A Each 1.00 8000.00 8000.00
2 Supply of Mounting rail with Master LED tube with all accessories as per
standard item:
MR TMC 501 P 1xT-LED 22W P3241 with Master LED Tube 18 W, 1600 lumen
Each 26.00 1550.00 40300.00
3 MR TMC 501 P 2xT-LED 22W P3241 with Master LED Tube 2x18 W, 3200 lumen
Each 48.00 2690.00 129120.00
4 1 x 15 watt surface mounting type LED light fixture complete with all accessories
MR as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W WH RD)
Each 2.00 1270.00 2540.00
5 1 x 18 watt surface mounting type LED light fixture complete with all accessories
MR as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 18W WH RD)
Each 57.00 1270.00 72390.00
6 MR 1x12 watt Wall mounted LED Bracket Light complete with 1 no. 12 watts LED
lamp as required. Each 14.00 340.00 4760.00
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses
etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
AMOUNT
S.NO NAME OF SUB-HEAD
DSR-2016 NON-DSR
SUB HEAD (I) :- SANITARY FIXTURES (NON DSR ITEMS) (FOR WARDEN)
1 MR Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube,
hand shower, couplings, wall hook and other accessories. each 3.00 1780.00 5340.00
2 MR Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm
dia and Easy flex Tube with accessories complete I all respect each 4.00 4925.00 19700.00
3 MR Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.
each 8.00 650.00 5200.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /
bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level
supported by clamp & hangers etc. in concealed / inside duct / under floor & basement
ceiling / external work etc. including chase cutting as required, excavation and back
filling in all kind of soils, suspended from floor under false ceiling or embedding the
pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of
shuttering for proper completion of the work, breaking and making good the walls and
floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to
IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work
includes commissioning of all pipes lines as per drawings and specifications and as
directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 185.00 585.00 108225.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 40.00 420.00 16800.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level
supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good
the same with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 1.00 365.00 365.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 12.00 410.00 4920.00
MR P-Trap type Floor Trap 110 x 75 mm each 22.00 445.00 9790.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 35.00 145.00 5075.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat
round cover with screws and other required fitting complete as required. each 4.00 710.00 2840.00
S. RATE AMOUNT
DSR-2016 DESCRIPTION UNIT QTY
No (in Rs) (in Rs)
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, MS gratings over pipes of bell mouth construction with epoxy
painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under false
ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4
cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring
shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge
at site.
110 mm dia metre 100.00 505.00 50500.00
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)
over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1
cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete. Each 8.00 187.60 1500.80
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
pipe with brass unions.
1
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 39.00 67.80 2644.20
2 18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms each 21.00 103.30 2169.30
3 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 4.00 555.30 2221.20
4 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 47.00 475.70 22357.90
5 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick
work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I.
surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size);
necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded
stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1
cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement
complete as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 1195.35 1195.35
6 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 5.00 147.75 738.75
18.46.2 20mm dia nominal bore each 5.00 170.95 854.75
18.46.3 25mm dia nominal bore each 5.00 205.80 1029.00
18.46.4 32mm dia nominal bore each 10.00 240.65 2406.50
18.46.5 40mm dia nominal bore each 10.00 298.75 2987.50
18.46.6 50mm dia nominal bore each 10.00 384.90 3849.00
18.46.7 65mm dia nominal bore each 10.00 617.20 6172.00
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 40.00 219.20 8768.00
S. RATE AMOUNT
DSR-2016 DESCRIPTION UNIT QTY
No (in Rs) (in Rs)
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer in charge.
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to
IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 130.00 246.20 32006.00
18.8.2 20mm nominal outer dia pipes metre 40.00 284.85 11394.00
18.8.3 25mm nominal outer dia pipes metre 30.00 333.60 10008.00
18.8.4 32mm nominal outer dia pipes metre 30.00 412.90 12387.00
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS
: 12701 marked, with cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank.
18.48B Circular tank Per Ltr 30500.00 7.25 221125.00
11 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed
end) :
18.17.1A 20 mm nominal bore each 6.00 396.55 2379.30
18.17.1 25 mm nominal dia each 3.00 428.20 1284.60
18.17.2 32 mm nominal bore each 9.00 500.75 4506.75
18.17.3 40 mm nominal bore each 7.00 584.70 4092.90
18.17.4 50 mm nominal dia each 2.00 749.90 1499.80
12 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
18.18.2 20 mm nominal dia each 1.00 327.05 327.05
MR 73.30 mm OD / 65 mm ID (min wall thickness - 5.16 mm) each 30.00 1200.00 36000.00
MR 73.30 mm OD / 80 mm ID (min wall thickness - 5.16 mm) each 25.00 1560.00 39000.00
2 Providing & fixing of hand lever operated forged brass body full way ball valve type
isolating valve having forged brass hard chrome plated mirror finish ball, steel handle
with PVC grip, teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete.
ABSTRACT OF COST
[ PRINCIPAL RESIDENCE ]
2 Supplying and stacking of good earth at site. 16.3.9 152.13 CUM 332.55 50590.83
46 Steel Painting:
(a) With ready mixed red oxide zink chromate primer
of approved brand and manufacture on steel
galvanised iron/steel works. 13.50.3 41.00 SQM 29.10 1193.10
(b) Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade: Two
or more coats on new work. 13.61.1 41.00 SQM 78.40 3214.40
(i) 300 mm weighing not less than 330 gms 9.86.1 33.00 NOS 169.15 5581.95
(ii) 250 mm weighing not less than 280 gms 9.86.2 3.00 NOS 138.25 414.75
IV MISCELLANEOUS 1242.70
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call
bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC
1.55 insulated copper conductor single core cable in surface/ recessed PVC conduit,
and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor
single core cable etc. as required.
1.55.2 Group B Point 6.00 365.00 2190.00
2 Twin Control Point wiring in PVC conduit, with modular type switch :-
1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class pvc conduit, 2
way modular switch, modular switch, suitable M.S. box and earthing the point
with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
required. Point 1.00 809.00 809.00
8 2.18 Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with
2 poles and earth metal enclosed plug top along with 20 amps. "C" curve, SP
MCB in sheet steel enclosure, on surface or in recess, with chained metal
cover for the socket outlet, and complete with connections, testing and
commissioning etc. as required. Each 2.00 980.00 1960
1 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/Isolator)
2.3.2 8 way , Double door Each 1.00 1061.00 1061.00
2 2.4 Supplying and fixing following way, horizontal type TP&N, sheet steel MCB
distribution board, 415 V on surface /recess, complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required (But without MCB / RCCB / Isolators).
5 2.10 Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series,
miniature circuit breaker (MCB)suitable for inductive load of following poles
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
2.10.1 single pole Each 30.00 173.00 5190.00
6 Supplying & fixing single pole, blanking plate in the existing MCB DB
2.11 complete etc. as required. Each 6.00 7.00 42.00
3 Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts,
MCB "C" curve in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
NDSR 63 amps FP MCB Each 1.00 1710.00 1710.00
NDSR 40 amps DP MCB Each 2.00 860.00 1720.00
3 1.21 Supply and fixing of following sizes of medium class PVC conduit along with
accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required :
1.21.1 20 mm. M 110.00 57.00 6270.00
1.21.2 25 mm. M 25.00 69.00 1725.00
4 1.18 Supply and drawing following pair, 0.5 sq.mm. FRLS PVC insulated annealed
copper conductor, unarmoured telephone cable in the existing surface /
recessed steel/ PVC conduit as required.
1.18.2 2 Pair M 50.00 19.00 950.00
5 1.19 Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm. Solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface / recessed steel/ PVC conduit as
required. M 50.00 29.00 1450.00
1 2.21 Providing and fixing M.V. danger notice plate of 200mmx150mm made of mild
steel, atleast 2mm thick and vitreous enamelled white on both sides and with
inscription single red colour on FRLSont side as required. Each 1.00 149.00 149.00
2 1.38 Supplying and fixing call bell/buzzer suitable for single phase, 230 volts,
complete as required. NOS 3.00 61.00 183.00
3 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for
ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5
10.18 DSR- mm thick M.S. sheet with its top surface hacked for proper bonding,
2016 top lid shall be screwed into the cast iron/ M.S. sheet box by means of
(Civil) 3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 7.00 130.10 910.70
1 Supply of 15W SURFACE MOUNTED LED with all accessories as per standard
NDSR
item..(Such as Panasonic ADL04R156 or Equivalent). Each 2.00 1840.00 3680.00
Supply of 15W WALL BRACKET LED BULB with all accessories as per
2 NDSR
standard item..(Such as Panasonic PBUM01157 or Equivalent). Each 4.00 270.00 1080.00
Supply of 20W SURFACE MOUNTED LED with all accessories as per standard
3 NDSR item..(Such as Panasonic ADL04R206 or Equivalent). Each 15.00 550.00 8250.00
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per
4 NDSR
standard item..(Such as Panasonic PBTM01207 or Equivalent). Each 6.00 2300.00 13800.00
3 1.50 Installation of exhaust fan in the existing opening, including making good the
damage, connection, testing, commissioning etc. as required
1.50.1 Upto 450 mm sweep Each 4.00 224.00 896.00
AMOUNT
S.NO NAME OF SUB-HEAD
DSR-2016 NON-DSR
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /
bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level
supported by clamp & hangers etc. in concealed / inside duct / under floor & basement
ceiling / external work etc. including chase cutting as required, excavation and back
filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes
laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for
proper completion of the work, breaking and making good the walls and floors etc. after
pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work
includes commissioning of all pipes lines as per drawings and specifications and as
directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 40.00 585.00 23400.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 10.00 420.00 4200.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level
supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good
the same with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 3.00 365.00 1095.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 410.00
MR P-Trap type Floor Trap 110 x 75 mm each 5.00 445.00 2225.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 5.00 145.00 725.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat
round cover with screws and other required fitting complete as required. each 710.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, MS gratings over pipes of bell mouth construction with epoxy
painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under false
ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4
cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring
shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
MR 110 mm dia metre 40.00 505.00 20200.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing
the outlet complete. Each 4.00 187.60 750.40
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
TOTAL SUB HEAD (III) (DSR-16) 750.40
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
pipe with brass unions.
1
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 12.00 67.80 813.60
2 18.49 Providing and fixing C.P brass bib cock of approved quality conforming to IS standards
IS: 8931.
18.49.1 15 mm nominal bore each 4.00 371.70 1486.80
3 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 1.00 555.30 555.30
4 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 12.00 475.70 5708.40
5 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick
work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I.
surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size);
necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded
stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1
cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement
complete as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 1195.35 1195.35
6 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 2.00 147.75 295.50
18.46.2 20mm dia nominal bore each 5.00 170.95 854.75
18.46.3 25mm dia nominal bore each 3.00 205.80 617.40
18.46.4 32mm dia nominal bore each 5.00 240.65 1203.25
18.46.5 40mm dia nominal bore each 4.00 298.75 1195.00
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 10.00 219.20 2192.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer in charge.
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 50.00 246.20 12310.00
18.8.2 20mm nominal outer dia pipes metre 10.00 284.85 2848.50
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS
: 12701 marked, with cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank.
18.48B Circular tank Per Ltr 1000.00 7.25 7250.00
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
2 Providing & fixing brass ball float valve with bronze floats of approved quality
complete.
MR 20 mm nominal dia each 1.00 1060.00 1060.00
MR 25 mm nominal dia each 1315.00
3 Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting and
making good the walls and floors etc. as required.
MR a) 25 mm dia each 10.00 80.00 800.00
S.N. DESCRIPTION OF ITEM QTY UNIT RATE AMOUNT (In RS.) AMOUNT (In RS.)
ON DSR NON SHEDULE
ABSTRACT OF COST
[ TYPE-III RESIDENCES G+I, 4 NOS. ]
45 Steel Painting:
(a) With ready mixed red oxide zink
chromate primer of approved brand and
manufacture on steel galvanised iron/steel
works. 13.50.3 127.63 SQM 29.10 3714.03
(b) Painting with synthetic enamel paint of
approved brand and manufacture to give
an even shade: Two or more coats on new
work. 13.61.1 127.63 SQM 78.40 10006.19
(NON-DSR )
1 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 16 345.00 5520.00
2 AC Three Phase Dual Source CT operated, AC sensing ,Multifunction Energy
meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485
Communication, Backlit LCD Display of Rating
MR ( Measures & Displays , Active & apparent energy,Loadsurvey , TOD & Power
On/Off Events) of Rating 5-60 A MTRS 1 8000.00 8000.00
2 1 x 15 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W
WH RD) Each 8 1270.00 10160.00
3 1 x 18 watt surface mounting type LED light fixture complete with all
MR accessories as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 18W
WH RD) Each 6 1270.00 7620.00
5 MR 1x12 watt Wall mounted LED Bracket Light complete with 1 no. 12 watts LED
lamp as required.
Each 32 340.00 10880.00
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses
etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /
bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level
supported by clamp & hangers etc. in concealed / inside duct / under floor & basement
ceiling / external work etc. including chase cutting as required, excavation and back
filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes
laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for
proper completion of the work, breaking and making good the walls and floors etc. after
pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work
includes commissioning of all pipes lines as per drawings and specifications and as
directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 165.00 585.00 96525.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 55.00 420.00 23100.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level
supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good
the same with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 1.00 365.00 365.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 12.00 410.00 4920.00
MR P-Trap type Floor Trap 110 x 75 mm each 12.00 445.00 5340.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 25.00 145.00 3625.00
5 MR Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat
round cover with screws and other required fitting complete as required. each 710.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, MS gratings over pipes of bell mouth construction with epoxy
painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under false
ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4
cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring
shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
MR 110 mm dia metre 85.00 505.00 42925.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing
the outlet complete. Each 4.00 187.60 750.40
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
TOTAL SUB HEAD (III) (DSR'16) 750.40
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
pipe with brass unions.
1
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 24.00 67.80 1627.20
2 18.49 Providing and fixing C.P brass bib cock of approved quality conforming to IS standards
IS: 8931.
18.49.1 15 mm nominal bore each 8.00 371.70 2973.60
3 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 4.00 555.30 2221.20
4 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 28.00 475.70 13319.60
5 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick
work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I.
surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size);
necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded
stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1
cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement
complete as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1.00 1195.35 1195.35
6 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 5.00 147.75 738.75
18.46.2 20mm dia nominal bore each 5.00 170.95 854.75
18.46.3 25mm dia nominal bore each 5.00 205.80 1029.00
18.46.4 32mm dia nominal bore each 5.00 240.65 1203.25
18.46.5 40mm dia nominal bore each 5.00 298.75 1493.75
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 10.00 219.20 2192.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer in charge.
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 135.00 246.20 33237.00
18.8.2 20mm nominal outer dia pipes metre 20.00 284.85 5697.00
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS
: 12701 marked, with cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank.
18.48B Circular tank Per Ltr 5000.00 7.25 36250.00
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
2 Providing & fixing brass ball float valve with bronze floats of approved quality
complete.
MR 20 mm nominal dia each 1060.00
MR 25 mm nominal dia each 1.00 1315.00 1315.00
3 Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting and
making good the walls and floors etc. as required.
MR a) 25 mm dia each 10.00 80.00 800.00
S.N. DESCRIPTION OF ITEM QTY UNIT RATE AMOUNT (In RS.) AMOUNT (In RS.)
ON DSR NON SHEDULE
ABSTRACT OF COST
[TYPE-II RESIDENCES- 4 NOS.]
45 Steel Painting:
(a) With ready mixed red oxide zink chromate
primer of approved brand and manufacture on
steel galvanised iron/steel works.
13.50.3 114.51 SQM 29.10 3332.24
(b) Painting with synthetic enamel paint of
approved brand and manufacture to give an
even shade: Two or more coats on new work.
13.61.1 114.51 SQM 78.40 8977.58
(NON-DSR )
1 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 12.00 345.00 4140.00
2 AC Three Phase Dual Source CT operated, AC sensing ,Multifunction Energy
meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485
Communication, Backlit LCD Display of Rating
MR ( Measures & Displays , Active & apparent energy,Loadsurvey , TOD & Power
On/Off Events) of Rating 5-60 A MTRS 1.00 8000.00 8000.00
2 1 x 15 watt surface mounting type LED light fixture complete with all accessories
MR as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W WH RD)
Each 12.00 1270.00 15240.00
3 1 x 18 watt surface mounting type LED light fixture complete with all accessories
MR as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 18W WH RD)
5 MR 1x12 watt Wall mounted LED Bracket Light complete with 1 no. 12 watts LED
lamp as required.
Each 32.00 340.00 10880.00
The MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking
arrangement, with trip setting as per load requirement. TP MCCB shall be with
solid isolable neutral link. The breaking capacity specified is Ics value. All
MCCB's shall be thermomagnetic type. All outgoing MCB's shall be C type with
10 KA breaking capacity.
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses
etc. at Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
S. DSR-2016 TOTAL RATE AMOUNT
DESCRIPTION UNIT
No QTY (in Rs) (in Rs)
1 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /
bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level
supported by clamp & hangers etc. in concealed / inside duct / under floor & basement
ceiling / external work etc. including chase cutting as required, excavation and back
filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes
laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for
proper completion of the work, breaking and making good the walls and floors etc. after
pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc
on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work
includes commissioning of all pipes lines as per drawings and specifications and as
directed by engg-in-charge at site.
MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 135.00 585.00 78975.00
MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 25.00 420.00 10500.00
2 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of
min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including
reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level
supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good
the same with cement concrete 1:2:4 complete as required.
3 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete
in all respects.
MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet each 1.00 365.00 365.00
MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 8.00 410.00 3280.00
MR P-Trap type Floor Trap 110 x 75 mm each 12.00 445.00 5340.00
4 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor
traps. each 21.00 145.00 3045.00
6 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal, Type-B as per IS : 13592 suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, MS gratings over pipes of bell mouth construction with epoxy
painting etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
concealed / inside duct / under floor / external work etc. including chase cutting as
required, excavation and back filling in all kind of soils, suspended from floor under false
ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4
cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including cost of shuttering for proper completion of the work, breaking and making
good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring
shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
MR 110 mm dia metre 65.00 505.00 32825.00
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
1 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing
the outlet complete. Each 4.00 187.60 750.40
18.21 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection
pipe with brass unions.
1
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore each 50.00 67.80 3390.00
2 18.49 Providing and fixing C.P brass bib cock of approved quality conforming to IS standards
IS: 8931.
18.49.1 15 mm nominal bore each 20.00 371.70 7434.00
3 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 15.00 555.30 8329.50
4 18.53 Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931.
18.53.1 15 mm nominal bore each 80.00 475.70 38056.00
5 18.32 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick
work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I.
surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size);
necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded
stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1
cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement
complete as per standard design
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 10.00 1195.35 11953.50
6 18.46 Providing & Fixing G.I. Unoun in G.I. pipe including cutting and threading
the pipe & making long screws etc. complete.
18.46.1 15mm dia nominal bore each 10.00 147.75 1477.50
18.46.2 20mm dia nominal bore each 10.00 170.95 1709.50
18.46.3 25mm dia nominal bore each 10.00 205.80 2058.00
18.46.4 32mm dia nominal bore each 10.00 240.65 2406.50
7 18.76 Cutting holes up to 30 X 30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 15.00 219.20 3288.00
8 18.7 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer in charge.
9 18.8 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1
CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS
: 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings including fixing the pipes with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in charge.
Concealed work including cutting chase and making good the wall etc.
18.8.1 15mm nominal outer dia pipes metre 150.00 246.20 36930.00
18.8.2 20mm nominal outer dia pipes metre 100.00 284.85 28485.00
10 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS
: 12701 marked, with cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank.
18.48B Circular tank Per Ltr 4000.00 7.25 29000.00
2 Providing & fixing brass ball float valve with bronze floats of approved quality
complete.
MR 20 mm nominal dia each 4.00 1060.00 4240.00
3 Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting and
making good the walls and floors etc. as required.
MR a) 25 mm dia each 10.00 80.00 800.00
ABSTRACT OF COST
[ELECTRIC SUB STATION]
S.N. DESCRIPTION OF ITEM DSR-2016 QTY UNIT RATES AMOUNT (In RS.) AMOUNT (In
ON DSR RS.)
2 Supplying and stacking of good earth at site. 16.3.9 10.410 CUM 332.55 3461.85
10 Brick work with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in foundation and plinth in:Cement mortar 1:6
(1 cement : 6 coarse sand) 6.1.2 4.170 CUM 4751.65 19814.38
13 Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in
superstructure above plinth level up to floor V level in : Cement
mortar 1:6 (1 cement : 6 coarse sand) 6.34.2
16.500 CUM 6167.20 101758.80
14 Half brick masonry with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in superstructure above plinth level
up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) 6.13.2 27.900 Sqm 684.20 19089.18
15 Extra for providing and placing in position 2 Nos 6mm dia. M.S.
bars at every third course of half brick masonry. 6.15 27.90 SQM 56.85 1586.12
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and
approved by Engineer-in-charge over the RCC slab including
adjoining walls upto 300 mm height including cleaning the surface
before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm
to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height including rounding
of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel with neat
cement slurry and making pattern of 300x300 mm square 3 mm
deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer-in-Charge :
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm. 22.7.1 48.150 SQM 1034.65 49818.40
17 Providing and fixing ISI marked flush door shutters conforming to
IS : 2202 (Part I) decorative type, core of block board construction
with frame of 1st class hard wood and well matched teak 3 ply
veneering with vertical grains or cross bands and face veneers on
both faces of shutters. 35 mm thick including ISI marked Stainless
Steel butt hinges with necessary screws.
9.20.1 6.960 SQM 2488.95 17323.09
18 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of
door shutter to be measured). 9.23 6.96 SQM 365.85 2546.32
21 Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and
all members such as F7D, F4B, K11 B and K12 B etc. complete of
standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and riveted, including providing and fixing of
hinges, pivots, including priming coat of approved steel primer, but
excluding the cost of other fittings, complete all as per approved
design, (sectional weight of only steel members shall be measured
for payment). Fixing with 15x3 mm lugs 10 cm long embedded in
cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size).
23 Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with : 4.0 mm
thick glass panes. 10.30.1 4.640 SQM 689.05 3197.19
31 Brick edging in full brick width and half brick depth including
excavation refilling and disposal of surplus earth lead upto 50
metres. With common burnt clay F.P.S.(non modulur) bricks of
class designation 75 16.7.1 33.50 RM 127.60 4274.60
32 Kota stone slab flooring over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match
the shade of the slab, including rubbing and polishing complete with
base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm
thick 11.26.1 47.710 SQM 1158.10 55252.95
34 P/F curtain rods of 1.25mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed with C.P. brass screws
and wooden plugs etc. wherever necessary complete (a) 25 mm
dia. (DSR-9.46.3) 4.22 RM 463.85 1957.45
35 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of approved
brand and manufacture on steel galvanised iron/steel works.
13.50.3 17.67 SQM 29.10 514.20
(b) Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade: Two or more coats on new
work. 13.61.1 17.67 SQM 78.40 1385.33
39 Providing & fixing Stainless steel sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade with nuts and
screws etc complete. (a) 250mm x 16mm .
M.R. 3.00 NOS 500.00 1500.00
AMOUNT
S. No DESCRIPTION DSR-2016 NON-DSR
(NON-DSR'2016)
2 MR S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length
fabricated from 14 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round
bar duly bent for supporting fan hanger painted with red oxide and screwing
arrangement with wiring conduit laid in the R.C.C. roof before concreting along
with supply of all materials, labour, T&P etc. for proper completion of work. Each 2.00 345.00 690.00
2 1 x 15 watt surface mounting type LED light fixture complete with all accessories
MR as required. (Eq. to Bajaj cat. no. BGSLO SLEEK SURFACE 15W WH RD)
ABSTRACT OF COST
[PUMP ROOM]
AMOUNT (In
DSR- AMOUNT (In RS.)
S.N. DESCRIPTION OF ITEM QTY UNIT RATES RS.)
2016 ON DSR
ON NON DSR
2 Supplying and stacking of good earth at site. 16.3.9 2.030 CUM 332.55 675.08
13 Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in
superstructure above plinth level up to floor V level in : Cement
mortar 1:6 (1 cement : 6 coarse sand) 6.34.2
0.730 CUM 6167.20 4502.06
(b) Laying brick bats with mortar using broken bricks/brick bats 25
mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming
to IS : 2645 and approved by Engineer-in-charge over 20 mm
thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand)
admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height including rounding
of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel with
neat cement slurry and making pattern of 300x300 mm square 3
mm deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All
above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm. 22.7.1 8.320 SQM 1034.65 8608.29
16 Extra for providing lipping with 2nd class teak wood battens 25
mm minimum depth on all edges of flush door shutters (over all
area of door shutter to be measured). 9.23 2.10 SQM 365.85 768.29
19 Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and
all members such as F7D, F4B, K11 B and K12 B etc. complete of
standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and riveted, including providing and fixing
of hinges, pivots, including priming coat of approved steel primer,
but excluding the cost of other fittings, complete all as per
approved design, (sectional weight of only steel members shall be
measured for payment). Fixing with 15x3 mm lugs 10 cm long
embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1
Cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size).
10.11.1 27.000 KG 113.60 3067.20
21 Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with : 4.0 mm
thick glass panes. 10.30.1 1.080 SQM 689.05 744.17
28 Brick edging in full brick width and half brick depth including
excavation refilling and disposal of surplus earth lead upto 50
metres. With common burnt clay F.P.S.(non modulur) bricks of
class designation 75 16.7.1 13.84 RM 127.60 1765.98
32 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of approved
brand and manufacture on steel galvanised iron/steel works.
13.50.3 2.34 SQM 29.10 68.09
(b) Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade: Two or more coats on new
work. 13.61.1 2.34 SQM 78.40 183.46
36 Providing & fixing Stainless steel sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade with nuts
and screws etc complete. (a) 250mm x 16mm .
M.R. 1.00 NOS 500.00 500.00
Supply of Green Line Smart of 10 watt and 1000 lumen, luminaire is perfect for
secondary roads and pathways. It sports a compact body, which offers a highly
2 MR efficient lighting solution as compared to fluorescent and CFL street lights. (such
as Philips -BRP022 LED 10 CW MR S1 PSU GR or Equivalent).
Each 1.00 3420.00 3420.00
[GUARD ROOM]
2 Supplying and stacking of good earth at site. 16.3.9 0.410 CUM 332.55 136.35
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge to required slope and
treating similarly the adjoining walls upto 300 mm height
including rounding of junctions of walls and slabs.
(e) The whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final test.
All above operations to be done in order and as directed
and specified by the Engineer-in-Charge :
21 Providing & fixing glass panes with putty and glazing clips in
steel doors, windows, clerestory windows, all complete with
: 4.0 mm thick glass panes. 10.30.1 0.540 SQM 689.05 372.09
27 Brick edging in full brick width and half brick depth including
excavation refilling and disposal of surplus earth lead upto
50 metres. With common burnt clay F.P.S.(non modulur)
bricks of class designation 75
30 Steel Painting:
(a) With ready mixed red oxide zink chromate primer of
approved brand and manufacture on steel galvanised
iron/steel works. 13.50.3 1.85 SQM 29.10 53.69
(b) Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade: Two or
more coats on new work. 13.61.1 1.85 SQM 78.40 144.65
31 Finishing walls with water proofing cement paint of required
shade : New work (Two or more coats applied @ 3.84 kg/10
sqm) 13.44.1 9.920 SQM 93.70 929.50
(i) 300 mm weighing not less than 200gms. 9.86.1 1.50 NOS 169.15 253.73
TOTAL 74885.37
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN,
UTTAR PRADESH
ABSTRACT OF COST OF ELECTRICAL WORK
SUB AMOUNT AS PER
PARTICULARS
HEAD SR ITEMS NS ITEMS
I WIRING 7,249.00 -
II SUPPLY & INSTALLATION OF FITTINGS & FANS 693.00 3,682.05
III DISTRIBUTION BOARD 3,506.00 -
IV EARTHING 3,720.00 -
G. TOTAL 18,850.05
ABSTRACT 1
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN, UTTAR PRADESH
SH: PROVIDING INTERNAL EI & FANS, BOARDS & DISTRIBUTION BOARDS, EARTHING ETC.
(All Amount in Rs.)
1.01 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium
class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable
etc. as required.
a) 1.10.3 Group C 4.00 Pts. 757.00 - 3,028.00 -
1.02 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed medium class PVC conduit alongwith 1 No. 4 sq.
mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required. 10.00 Mtr. 168.00 - 1,680.00 -
1.04 1.7 Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper
conductor, single core cable in surface/ recessed steel
conduit as required.
(a) 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 10.00 Mtr. 206.00 - 2,060.00 -
2.01 M.R. Supplying of following box type Fl. fitting made out of
CRCA sheet finished in antirust treated non-yellowing
super white stove enamelled paint duly wired with copper
a) wound heavy
Mounting rail duty chokelamps
for TLED starter1600
holder, starter (TMC
Lumens but without
501 P
1xT-LED with Essential LED 18W Tube) 3.00 Each - 585.35 - 1,756.05
2.02 1.25 Supplying and fixing two module stepped type electronic
fan regulator on the existing modular plate switch box
including connections but excluding modular plate etc. as 1.00 Each 288.00 - 288.00 -
required.
2.03 M.R. Supplying of 1200 mm sweep A.C. electric Ceiling fans,
capacitor type with double ball bearing complete with 300
mm down rod, canopies, shackles, blades, but without
regulator suitable for operation on 230 / 240 Volts, 50 Hz,
single phase, A.C. supply. ( G.E. ALSTHOM, KHAITAN &
HAVELL'S COMPANY) 1.00 Each - 1,926.00 - 1,926.00
ESTIMATE 2
Sl. RATE RATE AMOUNT AMOUNT
No. DSR-2016 DESCRIPTION QTY. UNIT (AS PER SR) (AS PER NS) (SR ITEMS) (NS ITEMS)
3.01 2.3 Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/
recess, complete with tinned copper bus bar, neutral bus
bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
a) 2.3.1 6 way, Double door 1.00 Set 942.00 - 942.00 -
3.03 2.12 Supplying and fixing following rating, double pole, 240 V,
isolator in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
3.04 2.14 Supplying and fixing following rating, double pole, (single
phase and neutral), 240 V, residual current circuit breaker
(RCCB), having a sensitivity current 30 mA in the existing
MCB DB complete with connections, testing and
commissioning etc. as required.
a) 2.14.1 25 A 1.00 Each 1,650.00 - 1,650.00 -
SUBHEAD - IV - EARTHING
1.00 5.1 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia
including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering
pipe etc. (but without charcoal/ coke and salt) as required.
1.00 Set 2,846.00 - 2,846.00 -
2.00 5.12 Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from
earth electrode including connection with G.I. thimble
excavation and re-filling as required. 1.00 Set 134.00 - 134.00 -
3.00 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in
recess for loop earthing as required. 20.00 Mtr. 37.00 - 740.00 -
ESTIMATE 3
KHO - KHO COURT
ABSTRACT OF COST
Amount Amount
Sl. DSR- Rate
Description of Item No L B H Qty. Unit On DSR On NS
No. 2016 (In Rs.)
(In Rs.) (In Rs.)
1 16.3 Supplying and stacking at site.
16.3.9 Good earth
1 40.00 30.00 0.30 360.00
Total 360.00 Cum 332.55 1,19,718.00
5 NS Providing and fixing of Basket Ball Pole : 8" round pipe with 3.2
mtr distance from the board. 25mm back board transparent Acrylic
with International Standard die made frame coated die made
framewith built in brackets for mounting. Dunking Rim with three
spring mechanism complete. 2 2.00 Each 75,000.00 1,50,000.00
22,53,675.90
Page 1
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN,
UTTAR PRADESH
COST OF DEVELOPEMNT WORK
Amount Amount
S.N. DSR-16 Description Qty Unit Rate on DSR-2016 on Non-DSR
( In RS.) ( In RS.)
1 AOR Cost of RCC Road 3,705.65 Sqm 1,239.92 45,94,709.55
2 Geophysical study for calculations of zone wise aquifer characteristics along with
the designs of tube well etc. NDSR 1 No 40,000.00 40,000.00
5 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part I), including collecting samples from different
strata, preparing and submitting strata chart/bore log, including hire & running
charges of all equipments, tools, plants & machineries required for the job, all
complete as per direction of Engineer -in-charge, upto 90 metre depth below
ground level.
A 500 mm dia NDSR 90 M 1,150.00 1,03,500.00
B 500 mm dia (90 to 150 mts) NDSR 10 M 1,285.00 12,850.00
-
6 Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (CM) pipe of required dia, conforming to
IS: 12818, including required hire and labour charges, fittings & accessories etc.
all complete, for all depths, as per direction of Engineer -in-charge.
-
A 200 mm nominal size dia NDSR 70 M 1,950.00 1,36,500.00
B 200 mm dia rigid PVC slotted pipe and accessories. NDSR 30 M 2,150.00 64,500.00
C 200mm dia bail plug/ Well Cap NDSR 2 Nos 1,500.00 3,000.00
D 200mm dia heavy duty M.S. Clamp. NDSR 1 Nos 6,500.00 6,500.00
12 Installation and Commissioning of pump set and all other necessary fitting. NDSR 1 No 5,000.00 5,000.00
-
13 Providing & fixing factory made out door type, weather proof Panel Board for
submersible pump with 7.5 HP motor, fitted with DOL starter, ammeter,
voltmeter, single phase preventer MCB’s, on/ off switch push botton duly wired
and made out of 14 SWG sheet, complete with locking arrangements, grouted on
ground, complete as directed by Project Director / Architect.
MR 1 Each 25,000.00 25,000.00
-
14 Providing and fixing 80 mm dia MS lowering clamp 40x8mm th. provided
complete with nuts, bolts, washers, etc. MR 2 M 4,493.25 8,986.50
TOTAL - 8,65,746.90
1.03 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation
/ banking excavated or stacked materials.
a) 2.26.1 All kinds of soil.
b) 1.5 m to 3.0 m Cum 83.00 51.75 4295.25
c) 3.0 m to 3.5 m Cum 53.00 103.50 5485.50
1.04 2.27 Supplying and filling in plinth with sand under floors, including
watering, ramming, consolidating and dressing complete.
Cum 98.80 917.75 90673.70
3.01 5.9 Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
a) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
Sqm 17.00 193.95 3297.15
b) 5.9.2 Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc. Sqm 197.00 378.60 74584.20
c) 5.9.3 Suspended floors, roofs, landings, balconies and access platform
Sqm 28.00 422.30 11824.40
4.01 11.36 Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-
in-Charge, in skirting, risers of steps and dados, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade complete.
Sqm 86.00 744.80 64052.80
4.02 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300
mm (thickness to be specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in colours such as
White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement
mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement
slurry @ 3.3kg/sqm including pointing the joints with white cement
and matching pigment etc., complete. Sqm 28.00 688.35 19273.80
5.01 22.4 Providing and Placing in position suitable PVC water stops
conforming to IS:12200 for construction/ expansion joints between
two RCC members and fixed to the reinforcement with binding wire
before pouring concrete etc. complete :
22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick) Metre 24.00 254.15 6099.60
DSR 2016
Page No. 1
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA
VIDYALAYA (JNV) BADAUN, UTTAR PRADESH
SUMMARY OF COST
1 19.19 Providing Precast Cement Concrete / SFRC Valve Chamber cover and
frame conforming to IS : 12592-2002., The concrete mix should be not less
than M 30.
19.19.1 L D- 2.5
19.19.1.1 Rectangular shape 600*450 mm internal dimensions Each 3.00 1,073.05 3,219.15
2 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
18.12.8 80 mm dia nominal bore Rmt 217.00 576.30 1,25,057.10
3 18.25 Providing and laying S&S C.I. standard specials such as tees, bends,
collars, tapers, caps etc. (Heavy class) :
18.25.1 Up to 300 mm dia. Qntl 2.00 4,476.30 8,952.60
2 18.19 Providing and fixing gun metal non- return valve of approved quality
18.19.6 (screwed
80 end) : bore
mm nominal
18.19.6.1 Horizontal Nos 2.00 2,503.10 5,006.20
4 MR Providing and fixing bronze double acting air valve of approved quality
with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers
etc if required will be paid separately) :
80 mm dia Each 2.00 5,649.74 - 11299.47
5 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
a) 18.17.1 25 mm nominal bore Each 2.00 428.20 856.40
b) 18.17.2 32 mm nominal bore Each 1.00 500.75 500.75
c) 18.17.3 40 mm nominal bore Each 1.00 584.70 584.70
d) 18.17.4 50 mm nominal bore Each 1.00 749.90 749.90
e) 18.17.5 65 mm nominal bore Each 1.00 1286.80 1286.80
7 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and
frame of required shape and approved quality
19.19.1 LD- 2.5
19.19.1.1 Rectangular shape 600*450 mm internal dimensions Each 6.00 1,073.05 6,438.30
Total 15,36,987.72
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN, UTTAR
PRADESH
ABSTRACT FOR RCC SEPTIC TANK 50 USERS
S.N. DSR-16 Description Qty Unit Rate Amount
1 2.8 Earth work in excavation by mechanical means (Hydraulic
excavator) I manual means in foundation trenches or drains
(not exceeding 1.5 m in width or 10 sqm on plan) including
dressing of sides and ramming of bottoms, lift up to 1.5 m,
including getting out the excavated soil and disposal of
surplus excavated soil as directed, within a lead of 50 m.
19.19.3 HD-20
19.19.3.1 Circular shape 560 mm internal diameter 2.00 Nos 1,300.95 2,601.90
16 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45
cm dry brick honey comb shaft with bricks and S.W. drain
pipe 100 mm diameter, 1.8 m long complete as per standard
design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 1.000 Nos 20,681.55 20,681.55
16 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45
x 45 cm dry brick honey comb shaft with bricks and
S.W. drain pipe 100 mm diameter, 1.8 m long complete
as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 1.000 Nos 20,681.55 20,681.55
16 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45
x 45 cm dry brick honey comb shaft with bricks and
S.W. drain pipe 100 mm diameter, 1.8 m long complete
as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 1.000 Nos 20,681.55 20,681.55
15 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45
x 45 cm dry brick honey comb shaft with bricks and
S.W. drain pipe 100 mm diameter, 1.8 m long complete
as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 1.000 Nos 20,681.55 20,681.55
2 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.
pipes with collars jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
19.6.2 150 mm dia. R.C.C. pipe metre 634.83 356.70 2,26,443.86 -
19.6.3 250 mm dia. R.C.C. pipe metre 409.62 482.05 1,97,457.32 -
19.9.1.1 Circular Manhole Internal dia 0.91mtr. each 10.00 8,683.75 86,837.50
8 19.12.1 Extra depth for circular type manhole 1.22 m internal dia (at 2.50 6,362.65
bottom) beyond 1.68 m to 2.29 m : metre 15,906.63
TOTAL 17,67,964.19
TOTAL 6,73,247.22
TOTAL 7,15,063.57
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV)
BADAUN, UTTAR PRADESH
ESTIMATE FOR H.T./L.T. PANEL & FEEDER PILLARS
S.No. Name of Item Qty Unit Rate Amount
1 MAIN LT PANEL
Incoming
MCCB 630A 50KA TPN 1 Nos
630AMP SPREADER TERMINAL 1 SETS
Metering
6Amp MCB SP 3 Nos
VAF METER 1 Nos
INDICATION LIGHT 3 Nos
400/5A CT's 3 Nos
Out going
Sub Panel MCCB 200A 25KA TPN 1 Nos
School Building MCCB 160A 25KA TPN 1 Nos
Boys Dormitory MCCB 160A 25KA TPN 4 Nos
Emergency Panel MCCB 160A 25KA TPN 1 Nos
Kitchen MCCB 100A 35KA TPN 1 Nos
Principal Residence MCCB 63A 10KA TPN 1 Nos
Guest House MCCB 63A 10KA TPN 1 Nos
Spare MCCB 160A 25KA TPN 1 Nos
BUS-BAR FEEDERS
400AMP ALU.BUS-BAR TPN 1 SETS
ENCLOSURE
2175*1100*300 (27SFT)
PANEL BODY FABRICATED IN 14/16 SWG CRCA SHEET , POWDER
COA- TED IN SIEMENCE GREY COLOUR COMPLETE IN ALL
RESPECTS UNIVERSAL GLAND PLATES. 1 Set 3,60,000.00 3,60,000.00
3/4 W@J
S.No. Name of Item Qty Unit Rate Amount
8 METER PANEL
Incoming
MCB 63A 10 KA TPN 1 Nos
Indication light R,Y,B 3 Nos
BUS-BAR FEEDERS
100AMP ALU.BUS-BAR TPN 1 SETS
Out going
Single Phase Energy Meter 4 Nos
MCB 25A DP 4 Nos
Emergency Section
Incoming
MCCB 32A DP 1 Nos
Out going
16A DP 4 Nos
ENCLOSURE 1 Set
900*1150*200 (9SFT)
PANEL BODY FABRICATED IN 14/16 SWG CRCA SHEET , POWDER
COA- TED IN SIEMENCE GREY COLOUR COMPLETE IN ALL
RESPECTS UNIVERSAL GLAND PLATES. 4 Set 38,000.00 1,52,000.00
TOTAL 13,97,000.00
13,97,000.00
4/4 W@J
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV)
BADAUN, UTTAR PRADESH
ESTIMATE FOR EXTERNAL ELECTRIFICATION
S.No. DSR-16 Name of Item Qty Unit Rate Amount
1 2 Pole Structure :
1.1 Supply & erection of 11KV double pole structure of steel tublar pole 9 mtr. 1 Set
Long (ISP-55) with MS base plate of size 600x600x6 mm with top channel,
dropper channel, pin insulator, disc insulator with fittings, TPMO, fuses set,
stay, earthing, holding clamps etc. including inter jumpering and main line
connection with PG clamps complete in all respects in 1:3:6 cement concrete
base and 1:2:4 foundation including excavation of pits size 600mm dia
circular, 1.6 metre deep, placement of poles in the pit, providing and
concreting with concrete. Keeping the pole in vertical position, back filing
and compacting of pits and providing & making plinth with concrete mix
1:3:6 of size 100 mm around the pole and 200 mm above ground level.
Foundation above ground level will be finished by cement & fine sand
mortar in ratio of 1:4:8 the 1/6 length of pole shall be coated with black
bituminous paint and remaining portion of the pole shall be painted with
one coat of red oxide primer and two coats of al. paint etc. complete in all
respects to support transformer and channel and anticlimping device also.
1.2 Supplying, installing, testing & commissioning of stay set complete 4 Sets
(galvanised) with 19/20 mm dia x 1.8 metre long stay rod, anchor plate of
size 45cm x 45 cm x 7.5 mm thick, thimble stay clamps, with turn buckles
M.R. 85,000.00 85,000.00
(20mm x 60 cm) 7/3.15MM dia GI stranded wire, strain insulators, in
cement concrete 1:2:4 foundation including excavation & refilling etc. as
required.
1.5 Supplying, installing, testing & commissioning of 11 KV drop out fuses 1 Set
complete with mountings etc.
1.6 Supplying, installing & testing of lightning arrestors including earthing the 1 Set
same.
1.7 Supplying, installing, testing & commissioning 11 K.V. Pin Insulators 1 Set
complete with large steel head , G.I. pin, nuts, washers etc. as required.
2 Supply and making indoor cable end termination with heat shirnkable jointing kit
with all accessories including lugs and other jointing materials, for following size of
M.R. 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
3 Supply and making outdoor cable end termination with heat shirnkable jointing kit
with all accessories including lugs and other jointing materials, for following size of
3 core, XLPE aluminium conductor cable of 11 KV grade as required.
M.R.
4 Supply of 200 KVA ,11KV/415 Volts , 50 Hz totally enclosed oil cooled, step-down,
outdoor transformer inclulding lifting lugs, wheels, cable termination boxes on 11
M.R. KV and LV side, earth terminals etc. as per particulars below.
1 No 5,90,000.00 5,90,000.00
Standard Reference = IS: 2026
Rating = 200KVA
Installation = Outdoor
b) Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal
size). 1.14 Cum 4,209.05 4,798.32
e) Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete . 6.00 SQM 193.95 1,163.70
Total DSR Amount 60,896.69
Total 14,39,662.71
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV)
BADAUN, UTTAR PRADESH
ESTIMATE FOR EXTERNAL ELECTRIFICATION
S.No. Name of Item Qty Unit Rate Amount
d) LED type 50 Watt (Street Light) light fittings of all types with all
accessories. 37 Nos 5,850.00 2,16,450.00
e) LED type 36 Watt (Street Light) light fittings of all types with all
accessories. 36 Nos 3,900.00 1,40,400.00
f) Suitable size Control box with 1 no. incoming and 2 nos. outgoing
terminals and 2 nos. tap-out terminal with 1 no.5A HRC fuses complet
1 set 73 Nos 1,000.00 73,000.00
g) Suitable number (S) 40mm dia Class-B GI Pipes(s) from above control
box to upto 0.5 meter below ground level for power cable entry.
73 Nos 550.00 40,150.00
LT CABLES
Total 25,99,143.69
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN,
UTTAR PRADESH
3.01 5.9 Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
c) 5.9.3 Suspended floors, roofs, landings, balconies and access platform
sqm 6.00 422.30 2533.80
3.03 5.33 Providing and laying in position machine batched and machine
mixed design mix M-25 grade cement concrete for reinforced
cement concrete work, using cement content as per approved
design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and
reinforcement, including admixtures in recommended
proportions as per IS: 9103 to accelerate, retard setting of
concrete, improve workability without impairing strength and
durability as per direction of Engineer-in-charge.“(Note :-
5.33.1 All works upto plinth level cum 4.00 6446.45 25785.80
4.01 6.2 Brick work with common burnt clay modular bricks of class
designation 7.5 in foundation and plinth in:
a) 6.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 10.00 4592.90 45929.00
4.02 6.12 Half brick masonry with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in foundations and
plinth in :
6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) sqm 2.00 593.50 1187.00
5.00 13 FINISHING
5.01 13.2 15 mm cement plaster on the rough side of single or half brick
a) 13.2.2 wall
1:6 (1ofcement:
mix : 6 fine sand) sqm 87.00 185.20 16112.40
6.01 19.6 Providing and laying non-pressure NP2 class (light duty)
R.C.C. pipes with collars jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete :
a) 19.6.3 250 mm dia. R.C.C. pipe Metre 3.00 482.05 1446.15
BOQ
S. No. DSR 2016 Description Unit R.W.H Rate (Rs) R.W.H
Ref. No. Amount (Rs.)
6.02 19.15 Providing M.S. foot rests including fixing in manholes with
20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) as per
a) 19.15.1 standard
With design
20x20 :
mm square bar Each 5.00 267.95 1339.75
6.03 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover
and frame of required shape and approved quality
a) 19.19.1 L D- 2.5
i) 19.19.1.1 Rectangular shape 600x450 mm internal dimensions Each 2.00 1073.05 2146.10
b) 19.19.2 M D - 10
i) 19.19.2.2 Circular shape 500mm internal diameter Each 1.00 908.35 908.35
7.01 23.1 Boring/drilling bore well of required dia for casing/ strainer
pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/ bore log, including hire & running
charges of all equipments, tools, plants & machineries required
for the job, all complete as per direction of Engineer-in-charge,
upto 90 metre depth below ground level.
7.03 23.5 Supplying, filling, spreading & leveling stone boulders of size
range 5 cm to 20 cm, in recharge pit, in the required thickness,
for all leads & lifts, all complete as per direction of Engineer-in-
charge. 4.00 921.90
Cum 3687.60
7.04 23.6 Supplying, filling, spreading & leveling gravels of size range 5
mm to 10 mm, in the recharge pit, over the existing layer of
boulders, in required thickness, for all leads & lifts, all complete Cum 5.00 1038.05 5190.25
as per direction of Engineer-in-charge.
7.05 23.7 Supplying, filling, spreading & leveling coarse sand of size
range 1.5 mm to 2 mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per
direction of Engineer -incharge. 3.00 1038.05
Cum 3114.15
BOQ
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA (JNV) BADAUN,
UTTAR PRADESH
Abstract
S.No. DSR-16 Description Quantity Unit Rate Amount
9 5.35 Add for Extra cement in RCC M-25 27.40 Qtl 672.75 18,433.35
18 10.15.1 Fixing with 15x3 mm lugs 10 cm. long. 693.91 Kg 124.05 86,079.54
Estimate Gate 1
S.No. DSR-16 Description Quantity Unit Rate Amount
16.3.9+
27 Supply & Filling Good Earth Carriage 10Km
2.25 3.60 Cum 458.30 1,649.88
Total 6,65,475.61
Estimate Gate 2
CONSTRUCTION OF PHASE-A WORK AT JAWAHAR NAVODAYA VIDYALAYA
(JNV) BADAUN, UTTAR PRADESH
SUMMARY OF COST
1 C/o Boundry Wall (1.80 mtr Height compound wall+ Concertina Coil
fencing over comound wall with RCC Column 0.23x0.35). 2,12,74,228.26
Boundary Wall Length = 2417.79 Meter.
2 C/o Main Gate (RCC Frame Structure) 6,65,475.61
TOTAL 2,19,39,703.87
C/o B/Wall at Jawahar Navodaya Vidyalaya Budaun, (U.P)
ABSTRACT OF COST
(RCC Frame Structure Boundary Wall )
S.N. DSR-16 Description Quantity Unit Rate DSR Amount
1 2.8 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10
sqm on plan) including dressing of sides and ramming
of bottoms, lift up to 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
9 5.33.2 All works above plinth level up to floor V level. 231.03 Cum 7,250.05 16,74,979.00
Page 1
S.N. DSR-16 Description Quantity Unit Rate DSR Amount
11 6.4 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level in
all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 455.43 Cum 5,582.85 25,42,597.00
Above plinth 475.45 Cum 4,751.65 22,59,172.00
12 4.13 Applying a coat of residual petroleum bitumen of grade
of VG-10 of approved quality using 1.7kg per square
metre on damp proof course after cleaning the surface
with brushes and finally with apiece of cloth lightly
soaked in kerosene oil.
500.48 Sqm 320.25 1,60,279.00
19 16.19 Supplying at site Angle iron post & strut of required size
including bottom to be split and bent at right angle in
opposite direction for 10 cm length and drilling holes
upto 10 mm dia. etc. complete. 5,924.10 Kg 62.05 3,67,590.00
Page 2
S.N. DSR-16 Description Quantity Unit Rate DSR Amount
SUB TOTAL CARRIED OVER TO SUMMARY 2,12,74,228.26
Page 3