Professional Documents
Culture Documents
Pumpset
Qty Description
1 TD12F - 1100 USgpm @ 150 psi
Order Type
Order Details
Order For: Pumpset
Lead Time: Standard Lead Time
Site Details
Site Mains voltage (for motor/ controllers/ Engine instrumentation): 380V / 50 or 60Hz
Auxillary site Voltage (for Jockey pump / controller): 3 Phase / 50 Hz / 380-415V
Site Suction pressure: Enter Suction pressure here (Mandatory for order processing): 0.00 psi.g
Start-up: Startup
HazMat Certification: Not Required
Pump
Materials of Construction
Design: Standard MOC (Material of Construction Code)
Material Code: All Iron with Bronze Impeller
Pump casing material: Cast Iron (ASTM A48 Class 40 #)
Impeller material: Bronze (ASTMB 584 - C90500 #)
Shaft material: High Tensile Steel (BS970 080 M46)
Casing ring material: Leaded Gunmetal (BS1400 LG2-C)
Shaft sleeve material: Bronze (ASTMB 584 - C90500 #)
Construction Options
Impeller Trimming: Required
Flange Drilling (Suc & Del)
Suction Flange Drilling: ANSI B16.1 CL250lb (FF)
Delivery Flange Drilling: ANSI B 16.1 Cl 250 (FF)
Tapping type: NPT Tapping
Sealing arrangement: Gland Packing (Standard)
Stuffing box sealing / flushing: Internal Seal/Flushing with External pipe (Standard)
Direction of rotation: Clockwise (Standard)
Driver
Driver Type
Driver Selection: Diesel Engine
Emmisssion Level: Any
Engine options (Catalog)
Engine manufacturer: Clarke
Battery Voltage: 12 V
Engine Cooling Method: Heat Exchanger Cooled
Engine Derate based on Site Conditions
Site altitude as entered on condtions of service page: 0.00 ft
The resulting derate factor for engine is 1
The rated power of selected engine (175HP) is now derated to 175HP
Engine performance is not adjusted for altitude and temperature, please make sure that you enter site altitude on "Conditions of service
page"
Diesel Engine: Engine-Clarke, T1, JU6H-UF34, 3000rpm, 175 HP, FM/UL,HE with baseplate, guard, drive shaft,batteries, rack and cables
Engine Cooling Loop: Cooling Loop Std 250 PSI HSC, 1"
Silencer: Residential Silencer, 5 inch
Coupling
Coupling details
Drive Shaft: Drive Shaft - (CDS20-S1)
BasePlate
Baseplate Type
Baseplate Options
Coupling guard: Non-Sparking Guard
Fitflow Supplies · · ,
Phone: · fax: Page 1 of 7
Dolphin Selection Package 19.0
Pumpset
Qty Description
Engine Baseplate Type: Single Baseplate
Single Baseplate - Diesel Engine: HSC / ES Baseplate
Accessories
Accessories menu
Pump Gasket Kit (A-GK-060-3): Gasket Kit for Pump Flanges
Fuel Tank
Fuel Tank Fittings: UL142 Fittings
Gauges
Delivery side Pressure gauge
Pressure Gauge selected (GGDEL300NGLY1111): 4" Pump Discharge Gauge 0-300 PSI, 1/4" NPT
Suction side Pressure gauge
Compound Gauge selected (GGSUC300NGLY1111): 4" Pump Suction Gauge 30-0-300 PSI, 1/4" NPT
Testing / Painting / Freight and Packing / Enginneering / Documentation
Documentation and Tests
Painting selection
Painting selection: Standard Painting
Pump
Qty Description
1 Order Type
Order Details
------------ Important --------------: Please note that we will discontinue using Grundfos Jockey pumps starting 11th March 2019. We will be
offering SPP Inc Jockey Pumps (EVMSU series) starting monday. Size cross references are available with applications team. This will not
affect processed orders as of 8 th March 2019.
Battery Total
Qty Description
1 Accessories
Accessories menu
Battery
Battery: Battery Kit - 12 V
Jockey Pump
Qty Description
1 Accessories
Accessories menu
Jockey Pump and / or Controller {)
Enter the duty parameters for jockey pump
Select the desired duty flow (usgpm): 15
Enter the desired Head (psi)160: 160
Jockey Pump / Controller Frequency: 50 Hz
Jockey Pump: Special Jockey Pump
Jockey Pump Gasket Kit(JPFLANGEKIT-1-1/4): 1-1/4" class 250 jockey pump flange kit
Flow Meter
Qty Description
1 Accessories
Accessories menu
Flow Meter Details (F710001111111111)
Flow Meter Option
Flow Meter End: Grooved
Flow Meter Size: Flometer-6Inch dia, 1000 gpm, Grooved
Waste Cone
Qty Description
1 Accessories
Accessories menu
Waste Cone ()
Waste cone: 4" x 8" Enclosed Waste Cone - Cla-Val
Freight
Qty Description
1 Freight: Freight
Fitflow Supplies · · ,
Phone: · fax: Page 3 of 7
Dolphin Selection Package 19.0
Fitflow Supplies · · ,
Phone: · fax: Page 4 of 7
Fitflow Supplies
150 Power
100
50
250 100
225 90
200 80
175 70
Efficiency - %
12.01 in
Head - psi
150 Efficiency 60
125 50
100 40
75 30
50 20
25 10
0 0
NPSHr - ft
80
NPSHr
40
0
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600 2,800 3,000
Flow - USgpm
Fitflow Supplies · · ,
Phone: Page 5 of 7
Version: 19.0
Fitflow Supplies
Fitflow Supplies · · ,
Phone: Page 6 of 7
Version: 19.0
1 2 3 4 5 6 7 8 9 10 11
63.63"
58.44"
41.25"
6
D D
M ANUAL RUN
TO START ENGINE
1.Position MODE SELECTOR switch to MANUAL RUN.
2.Lift and hold MANUAL CRANK #1 until engine starts, or release
5
after 15 seconds. If unit fails to start, wait for 15 seconds,
use MANUAL CRANK #2 and repeat step.
3.If COOLING WATER is not flowing or engine TEMPERATURE is too HIGH,
open cooling system manual by-pass valve.
AUT O M AT IC
OR
M ANUAL ST O P
TO STOP ENGINE
1.Return MODE SELECTOR switch to AUTOMATIC and MANUAL STOP position,
engine will stop.
2.Close cooling system manual by-pass valve.
IMPORTANT
DO NOT leave the MODE SELECTOR switch in the MANUAL RUN position
during AUTOMATIC operation. (The controller will be unable to stop
the engine and DAMAGE MAY RESULT)
6.89"
F 13.39" 12.06" F
6" SUCTION 5" DISCHARGE 21.00"
1
6" CHANNEL
12.51" 2 3 4
10.31"
23.75"
G APPROX. EQUIPMENT WT. [LBS.] G
25.77"
3274 27.77"
NOTES:
DRN : MFH 06/8/12
1) THE DRIVESHAFT IS DESIGNED TO OPERATE AT A 2) FLANGE DRILLING AS PER ANSI B16.1 CLASS 250 FF. PUMP MODEL: TD12F
2° ANGLE WITH THE INPUT AND OUTPUT SHAFTS APP'D : RLM 06/8/12
IN PARALLEL. THE ENGINE CRANKSHAFT 3) ALL DIMENSIONS IN INCHES. ENGINE MODEL: JU6H-UF34
DRAWN SCALE : N/A
IS TO BE SET WITH A PARALLEL OFFSET OF 4) BASE MUST BE COMPLETELY FILLED WITH GROUT PER NFPA 20.
H 0.35±0.10 INCHES VERTICALLY ABOVE DIESEL DRIVEN HORIZONTAL SPLIT CASE
H
THE PUMP SHAFT AND 0.00±0.10 INCHES PARALLEL 5) PUMP IS CW (CLOCKWISE) ROTATION WHEN VIEWED FROM SPP PUMPS LP FIRE PUMP SET
OFFSET HORIZONTALLY RIGHT OR LEFT OF THE COUPLING END. 6716 BEST FRIEND ROAD
THE PUMP SHAFT. REFER TO THE ENGINE MANUAL NORCROSS, GA. 30071
SHOP ORDER
NUMBER
BORDER
SIZE A2
FOR ALIGNMENT. (770)409-3280 DRAWING
NUMBER TD12F - JU6H-UF34 SHEET 1 OF 1
Page 7 of 7