Professional Documents
Culture Documents
Chloroprene Latex Cement Mortar CFLD
Chloroprene Latex Cement Mortar CFLD
Product Features:
1, the product is made of chloroprene latex emulsion mixed with cement and sand
instead of water, stir to form a chloroprene latex cement mortar.
2, a chloroprene latex is polychloroprene latex modifier as the base material, an
aqueous cationic emulsion, gel, better storage stability.
3, in concrete, cement mortar interfacial bond strength is good, there is a certain
toughness (ie improving cement brittle), easy to crack.
4, can be closed any mortar concrete pores Road, which play the role of water
impermeability.
Technical Specifications:
Chloroprene latex main technical indicators
No. Pilot project Performance
1 Exterior White emulsion
2 PH value 10 ~ 12
3 Chlorine content,% 35
4 Solid content,%> 30
Chloroprene latex cement mortar main technical indicators
Performance
No. Pilot project
Rough surface Smooth surface
1 Bond strength, 28d, Mpa, ≥ 3.8 2.5
2 Tensile strength, 28d, Mpa, ≥ 5.5
3 Compressive strength, 28d, Mpa, ≥ 35
4 Impermeability, Mpa,> 15
5 Water absorption, 7d,% 2.6 ~ 2.9
Use:
1, the ground Construction: Concrete roofing, especially irregularly shaped roof, kitchen
and toilet, swimming pool and other water impermeability.
Construction method:
4 Ingredients: primary treatment, according to chloroprene latex: cement: sand = 0.2
to 0.5 in; weight ratio of 1:2.0 to 2.5 mix, stir after use. Since rapid latex agglutination,
one should not be too ingredients, the mixture must be used within 20min, with the
accompanying use.
5,
Facade construction once construction of the thickness should not exceed
1cm. Construction of the thickness 2cm, dosage 35kg / m or so.
Packaging, transportation and storage:
1, Packing: neoprene latex plastic drum, 50kg / barrel.