Professional Documents
Culture Documents
DSE8610 MKII Data Sheet (US) PDF
DSE8610 MKII Data Sheet (US) PDF
DSE8610 MKII Data Sheet (US) PDF
DC SUPPLY
CONTINUOUS VOLTAGE RATING
SYNCHRONISING AUTO START 5 V to 35 V Continuous
MAGNETIC PICKUP
KEY FEATURES outputs in CAN mode VOLTAGE RANGE
+/- 0.5 V to 70 V
• Comprehensive synchronising & • 4 configurable analogue/digital • Water in fuel digital input
loadsharing capabilities inputs • Fuel tank bund alarm digital input FREQUENCY RANGE
• Built in governor and AVR control • Built in sensors to support 0 V to 10 • Separate ramp up and ramp down 10,000 Hz (max)
• Base load (kW export) control V & 4 mA to 20 mA rates configurable via PLC INPUTS
• Positive & negative kVAr export • 12 configurable digital inputs • Configurable CAN message time- DIGITAL INPUTS A TO L
Negative switching
control • Configurable 5 stage dummy load outs
• Mains (Utility) decoupling protection and load shedding outputs • In-built SNMP ANALOGUE INPUTS A TO D
• 4-Line back-lit LCD text display • CAN, MPU and alternator frequency • Configurable CAN transmit & Configurable as:
Negative switching digital input
• Multiple Display Languages speed sensing in one variant receive 0 V to 10 V sensor
• Five key menu navigation • Real time clock • Battery chargers on DSENet® 4 mA to 20 mA sensor
0 Ω to 480 Ω sensor
• LCD alarm indication • Manual and automatic fuel pump
• Heated display option available control KEY BENEFITS OUTPUTS
• Customisable power-up text and • Engine run-time scheduler • Compatible in load share systems OUTPUT A & B (FUEL & StART)
15 A DC at supply voltage
images • Fuel usage monitor and low fuel containing DSE5500, DSE7500,
• DSENet expansion compatibility level alarms DSE8000 and DSE8600 MKII OUTPUTS C & D
• Data logging & trending facility • Simultaneous use of all series. Contact DSE for further 8 A AC at 250 V AC (Volt-free)
ELECTRICAL SAFETY
The DSE8610 MKII is an easy to use Designed to offer increased built KEY LOAD SHARE FEATURES: BS EN 60950
Safety of Information Technology Equipment,
Synchronising Auto Start Control in support for active sensors for • Peak lopping/sharing (with including Electrical Business Equipment
Module suitable for use in a 0 V to 10 V & 4 mA to 20 mA. appropriate DSE mains controller)
multi-generator loadshare system, Comprehensive communication • Sequential set start TEMPERATURE
BS EN 60068-2-1
designed to synchronise up to 32 and system expansion options are • Manual voltage/frequency
Ab/Ae Cold Test -30 oC
generators including electronic and available. adjustment BS EN 60068-2-2
non-electronic engines. • R.O.C.O.F. and vector shift Bb/Be Dry Heat +70 oC
Using the DSE PC Configuration Suite protection
VIBRATION
The DSE8610 MKII monitors the Software allows easy alteration of the • Generator load demand BS EN 60068-2-6
generator and indicates operational operational sequences, timers and • Automatic hours run balancing Ten sweeps in each of three major axes
status and fault conditions, alarms. With all communication ports • Mains (Utility) decoupling 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz
at 2 gn
automatically starting or stopping capable of being active at the same • Mains (Utility) decoupling
the engine on load demand or fault time, the DSE8610 MKII is ideal for a test mode HUMIDITY
condition. wide variety of demanding load share • Dead bus sensing BS EN 60068-2-30
applications. • Bus failure detection Db Damp Heat Cyclic 20/55 oC at 95% RH
48 Hours
System alarms are annunciated on • Direct governor and AVR control BS EN 60068-2-78
the LCD screen (multiple language • Volts and frequency matching Cab Damp Heat Static 40 oC at 93% RH
options available), illuminated LED • kW and kvar load sharing 48 Hours
and audible sounder. • Dead bus synchronising SHOCK
BS EN 60068-2-27
The event log will record 250 events Three shocks in each of three major axes
15 gn in 11 mS
to facilitate easy maintenance, and an
extensive number of fixed and flexible DEGREES OF PROTECTION
monitoring, metering and protection PROVIDED BY ENCLOSURES
features are included. BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
DSENET® RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT HOST INPUTS SENDERS STOP SUPPLY 8-35V
ETHERNET
+
DEUTZ DETROIT
DSE8610 MKII MSC
ISUZU
PERKINS
IVECO
JOHN DEERE
CATERPILLAR LOMBARDINI
MTU SISU
7 VOLVO JCB DIESELMAX
55xx 75xx 8xxx 8xxx MKII
CUMMINS YANMAR
OTHER SCANIA AND OTHERS
BUS VOLT FREE GENERATOR SENSING FUEL & START CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
CURRENT VOLTS D+
+ W/L
ISSUE 3