Working pressure WP 486.605 psig Working pressure+Static Head WP 491.226 psig Corrosion Allowance 3.2 mm Vessel material SA-516 GR 70 Shell I.D. D 775.000 mm Vessel Thickness t 16 mm Neck material SA 106 GR B Nozzle neck O.D. do 88.9 mm Provided Neck tickness (Nom.) 11.13 Efficiency (seamless pipe) E 1.000 Include Mill Tolerance YES Nozzle neck thk (Incl Mill Tol.) t 9.739 mm 0.383 inch Nozzle neck corroded tn 7.930 mm 0.312 inch Corroded Neck I.D. dn 79.440 mm 3.128 inch RF PAD THK. tp 16.000 mm 0.630 inch RF PAD Width w 53.000 mm 2.087 inch Corroded Shell thk ts 12.800 mm 0.504 inch Corroded shell I.D. Dc 781.400 mm 30.764 Inch Required thk. Of nozzle with out CA en 0.05 inch Stress Ratio (fn/fs) fn/fs 0.920
Equivalent Thickness of seamless shell, Reg. 270
Required Thickness of seamless shell with out CA:
es = WP * Dc / ( 2 * f * E - WP)+0.03 0.41000 inch
C1 = Higher of ( ts + 3 inch ) and dn/2 3.504 inch
( Refer Fig. 25 - B )
Area, X = dn * es 1.2823 sq. inch
b = Smaller of 2.5xts or 2.5xtn or actual(3.9inch) 0.78 inch
Area, Y = [ 2x( t - en ) x b x(fn/fs)] + [ 2 * ( ts - es ) x C1+ 2 x tex Smaller of (C1,w) ] 5.4489 sq. inch
Area Y > Area X, Provided Reinforcement is Adequate.